Freemax Maxus 200W, Maxus 100W, and Maxus 50W Box Mod Kit are Freemax Maxus Series Kits, and all of them are powered by different batteries with different wattage outputs. As for you, which kind of Maxus Vape Kits do you need in your daily vaping life?



Adopting the SmartLoad Technology without distinguishing positive and negative poles, Maxus 200W Box Mod can accommodate either single or dual 18650 batteries with the max output of 200W.

Freemax Maxus 100W Box Mod can be compatible with one single 21700/20700/18650 battery with the SmartLoad Technology, firing up to 100W. So there is no need to distinguish between positive and negative poles, and you can assemble the battery at your own will, super easy and convenient.

Freemax Maxus 50W Box Mod is powered by a 2000mAh internal battery with 2A fast charging, providing an all-day going power and 80 minutes charging time for maximum. However, Freemax Maxus 100W and Maxus 200W Mod are also with Type-C and 2A Fast Charging functions, which provide users enough power for a full day's use.

As for you, which Maxus vape device can attract you? Which one can meet your vaping needs? Welcome to leave your comment.

BMOR Sober Pod System Vape Kit is built-in a powerful 650mAh integrated battery that takes a 3.6V steady voltage output, consistently pushing power for your kit.


Sober Pod has a draw-activated firing mechanism thus eliminating a need for any buttons, simply and conveniently. It applies to the magnetic suction and a buckle triple reinforcement for quick removal and replacement of the BMOR Sober Cartridge . Based on its 4.0ml vape juice capacity coupled with a 0.8ohm meshed coil, making it more efficient to heat up and delivering scrumptious flavor and vapor. It is sought-after due to its intriguing CMF design that absolutely worth becoming your vaping partner.


Features of BMOR Sober POD Kit
Size: 26 x 96mm
Power: 15W
Capacity: 4.0ml
Resistance: 0.8ohm
Battery: 650mAh Rechargeable
Material: PCTG
650mAh Integrated Battery
3.6V Steady Voltage Output
Tiding Battery Indicator
Draw Activated Firing Mechanism
Magnetic Suction and Buckle Triple Reinforcement
0.8ohm Meshed Coil
Intriguing CMF Design





Quick link to SOBER Pod >> https://www.3fvape.com/52026-bmor-sober-15w-pod-mod-kit.html

The SMOK Solus Pod System Vape Starter Kit is a super portable pod system kit designed with button-free vaping device. It comes with 700mAh built-in battery and the battery can be recharged via micro USB charging port.


There is a blue light on the front of the SMOK Solus Pod Kit to inform you of the current state. You can remove and install the solus pod cartridge effortlessly with solid magnetic connection. Solus Pod Kit is equipped with a meshed 0.9ohm pod cartridge of 3.0ml e-juice capacity, which will offer you pure MTL flavor. The duck-billed mouthpiece makes the leakage less.


Features of SMOK Solus Pod:
Size : 100 x 21.5 x 13mm
Battery Capacity: 700mAh
Output Wattage: 4W~16W
Input Voltage: 3.3V~4.2V
Output Voltage: 3.0V~3.6V
Standby Current: <5uA
Resistance Range: 0.8ohm~3.0ohm
Charging Voltage: 5V
Charging Current: Max 0.5A
E-juice Capacity: 3.0ml
Charging: Micro USB charging port
700mAh battery capacity
LED indicator to show the current state
Rechargeable battery
Aluminum unibody integrated with PCTG pod
More sensitive that button-triggered design
10S over-vaping protection
Micro USB charging port
Solid magnetic connection
Equipped with a 0.9ohm mesh coil
Duck-billed mouthpiece to avoid leakage
Button-free vaping device





Quick link to the Solus 16W Pod >> https://www.3fvape.com/52033-smoktech-solus-16w-pod-kit.html

Some of my friends are avid smokers. Some smoke weed some smoke cigarettes but everyone I know kind of looks down on vaping. I’ve had some people tell me that vaping will give me lung cancer and they would prefer if I just went back to smoking cigarettes. I really don’t care about any of this because I’m use to it. But I want to know what your experiences with this are

With that, Aspire and Steampipes have combined forces and created the Kumo, dedicated to exploring groundbreaking high-end RDTA technology. With this new partnership, Aspire and Steampipes are supplying the ultimate vaping experience to DTL users. Adopting the Capillary System E-liquid Conduction Technology patented by Steampipes and the imaginative design by Aspire, the Kumo is the first RDTA atomizer in the Aspire Prestige line.

Aspire Kumo RDTA features:
1 Constructed from premium stainless steel and formed with precision machining technology & sandblasting craft, the Kumo represents a sleek, visually appealing and metallic texture.
2.The unique Capillary System E-liquid Conduction Technology, plus a novel top coiler structure contributes the Kumo to deliver a rendering of intensive flavor close to an RDA.
3. An evolution of liquid transport system, the Kumo doesn't need a medium to transport the liquid, which can better assure the purity of the e-liquid, to allow your every puff as fresh as the last.
4. Benefiting from a spare AFC, Kumo embodies itself in 2 styles.
5. User-friendly RDTA build
6. The rebuildable Kumo RDTA is a top coiler with 4 air inlets, which features a unique adjustable airflow system.
8. 810 replaceable drip tip
9. 3.5 ml / 2 ml capacity

The legendary Cloudflask design is back with a BANG! Newly refined, to bring a smaller, more versatile Cloudflask sub-ohm pod AIO device,the Cloudflask S is ready for HUGE performance.

Cloudflask S features:

1. Pod capacity: 5.5 ml / 2.0 ml
   
   
2. Preinstalled with the existing 0.25 Ω Cloudflask mesh coil, Cloudflask S also introduces an all-new 0.6 Ω mesh coil, which allows both DTL and restricted DTL vapers to experience an immersive vaping journey, with huger clouds.
   
   
3. The design of the unique double-side air inlets, teamed with Bypass output, contributes to a refined and versatile user experience.
   
   
4. The Cloudflask S is available in 2 sleek options. The inclusion of the option to invest in the leather case variant, alongside the standard Cloudflask S, without the included case.
   
   
5. Bottom refilling, easy and convenient
   
   
6. Bypass output
   
   
7. The Cloudflask S is powered by an integrated internal 2000 mAh battery. This high capacity ensures that your Cloudflask S will last you through the course of a day prior to needing a charge.
   
   
8. 2A Type-C quick charging
   
   
9. The 3 color indicator lights show battery level, remind you to charge your Cloudflask S timely
   
   
10. Aspire ASP chipset safety protection

From CASAA.ORG

"In light of the news coming out from the FDA over the past week about vapor product PMTAs, we wanted to address some of the most common questions, rumors, and misinformation that have been circulating........"

See whole aritlcle here:

Is FDA Banning Vaping?

Hi ECF members, In this review i take a look at the 200W MDura Box Mod from Wotofo. The Wotofo MDura Box Mod was supplied for the purpose of this review by Sourcemore.

Wotofo MDura Mod 200W Box Mod




Introduction

For a while Wotofo have specialised in atomisers and in more recent times are best known for the Serpent, Profile and other collaborations, they gained even more clout in the marketplace with their takeover of OFRF along with the NexMesh brand! Mods from Wotofo in the past have not been released regularly but we now see the release of 3 MDura Mods in quick succession, the Pico like Mini, the Pro and this the standard dual battery MDura 200W Mod! The MDura 200W Box Mod is a dual 18650 Power only device which has both a puff counter and display colour customisation, a very simple device without TC or other settings which will appeal to those who just want to set the wattage and vape! Let's crack on!

_________________________________________________________________________



In The Box





Contents:

1* MDura Box Mod
1* Type-C Charging Cable
1* User Manual

_________________________________________________________________________



Aesthetics and Ergonomics

The MDura came in the usual Black and Wotofo Green cardboard box packaging with branded rich transparent plastic lid! Looking through the lid I could see I had been sent the King Kong Orange version, the colour refers to the Leather (100% sure it isn't) wrap which covers the spine and most of the sides, the options are King Kong Black, King Kong Blue, King Kong Orange or King Kong Red.

At 105g the MDura for a metal (Zinc Alloy) dual battery device is lightweight but still seems very solid and aesthetically in my opinion looks really good but that will depend on how plain or not you like devices and the raised "MDura" on one side of the Leather wrap will either be loved or loathed, some just like branding kept to the minimum while others like bold aesthetic features.

So we have a Zinc Alloy main chassis and Leather wrap (according to the marketing) which covers the spine and sweeps around both sides, on one side of the wrap we have that raised "MDura" as described and on the other side two vertical rows of stitching, the whole wrap has what I would describe as breathing dimples! The wrap is very well cushioned making the device comfortable to hold but has a plastic like synthetic feel, it definitely isn't Leather as claimed but looks good! The wrap and main chassis is broken up by a Zinc Alloy Gunmetal bracket which is becoming very popular on devices, it has a gloss finish and mine came with scuff marks on one side:





Certain units of any device can come with blemishes or/and scratches so I might just of got unlucky, even so looking at the scuff marks reveals the finish on the bracket is very thin and their presence does give question marks about the durability, I can see the base metal showing through on the bracket sooner rather than later especially if used as a daily driver!

On the chassis on one side low down we have "NEXCHIP Inside" printed and in the same position on the opposite side a silicone plug with a USB symbol, removing this reveals the Type C USB connection. Moving to the face we have a horizontally positioned rectangular plastic fire button at the top and at the bottom smaller side by side matching navigational buttons, all protrude nicely and give a satisfying click but when shaking the device we get rattle from the fire button! Finally positioned centrally on the face we have the large colour screen.

Moving to the base we have printed safety stamps and grooves for grip and finally up top we have an 20mm 510 Stainless Steel plate which sits flush, the 510 is Gold plated and Spring loaded. Despite mine coming with scuffs on one side of the bracket in my opinion it looks good and comes in some nice colour options, it's lightweight, cushioned spine and quite compact size makes it one of the more suitable dual battery devices for use while out and about!




_________________________________________________________________________



Wotofo MDura Mod Parameters:

Mod Dimensions: 82mm*52mm*26mm
Materials: Zinc Alloy, Leather Wrap (??)
Weight: 105g
Display: 0.96" TFT screen
Battery Type: Dual 18650 batteries (not included)
Resistance Range: 0.1ohm-2.5ohm
Power Range: 5W-200W
Standby Current: <300uA
Input Voltage: 6.4V-7.4V
Output Voltage: 0.5V-8.2V
Charging Port: Type-C
Charging Current: DC 5V/2A
Atomiser Connection: 510 connection
Colour: King Kong Black, King Kong Blue, King Kong Orange, King Kong Red






_________________________________________________________________________



Fitting The Batteries

The MDura 200W Mod accommodates dual 18650 batteries that get fitted via the hatch door on the base of the device, just slide the door forward and lift up, we have grooves which help with this process. Orientation is vibrantly labelled at the bottom of the tubes and also both orientation and the labelling of the batteries A & B is in bright White on the underside of the door!

When the door is secured we have no movement or battery rattle whatsoever, I know over time some people have experienced this type of battery hatch door opening during use but only time will tell, certainly during my testing it was absolutely fine.




_________________________________________________________________________



Display

The rectangular display has a lot of bordering (referred to has accents) around the information, these accents can be changed to be one of six colours! The display is bright and although how easy it is to read all the information changed depending which colour you set the display in general it was pretty easy especially the values depicted in White which stand out well although the titles such has ohm and volts etc which are in Black could be harder to see with certain colour accents!

At the top we have the 2 battery status bars, battery A to the left and B to the right, underneath each bar the charge is also given as a percentage which I like! Below the battery information positioned centrally we have the wattage and "W" for the unit to the right, above the W we have a Green padlock in either a closed or open position depending on the status.

In the bottom half of the display we first have ohms, followed by volts and then the 4 digit puff count, finally right at the bottom of the display we have vape duration!




_________________________________________________________________________



Operating The MDura

The MDura is the usual 5 clicks of the fire button within 2 seconds to both turn on and off, when turning off we get a chip information screen and when turning on the Wotofo logo is displayed for 2 seconds before it displays the main working screen.

Once on the whole device can be locked by pressing the fire button quickly 3 times, the device will also not fire. What I like though is it also allows for just the navigational buttons to be locked by pressing both navigational buttons simultaneously, using this method locks those buttons for wattage adjustment but the device will still fire!





The MDura is a simple adjustable Wattage device with no extra modes or settings so is as easy as it gets to navigate! fire and down together resets the puff counter and fire and up together changes the colour of the display, each time fire and up is pressed it changes to the next colour, the options are Red, Green, Purple, Blue, Orange or White! The wattage adjusts from 5W to 200W in 1W increments and round robins. I would like to see point 1 adjustments with single presses up to 20W as although this is a high powered device doesn't mean it shouldn't be used by low wattage MTL vapers who would benefit from more precision when setting wattage, also it scrolls slower than average!




_________________________________________________________________________



Protections:

Low Voltage Protection
PCBA Temperature Protection
Short Circuit Protection
Low Resistance Protection
Overheating Protection
Overvape 8s Protection




_________________________________________________________________________



Charging

I always recommend charging your batteries externally but if you do need to charge in the device the MDura has a Type C connection and 2A (max) charge rate. The USB connection port is located on the side of the device towards the front and low down, the vertically positioned port has a silicone plug which needs pulling out (it remains attached to the device). I like these silicone plugged USB ports on devices, first seen on IP rated devices for obvious reasons but still offers protection from dust and e-liquid insertion etc on any device so a pro in my book!

While charging a status bar is displayed for each battery which are labelled "A" and "B", also while charging the device supports pass-through!




_________________________________________________________________________



My Thoughts!

I am not going to dwell too long on the scuff marks one side of the bracket as it can happen that some devices will not come perfect and in a retail setting I would be looking for a replacement or at least some form of compensation, after saying that it did allow me to see just how thin the finish on the bracket is so not looking good when it comes to the durability of the finish and possible wear down the road. Of course it is always possible that just that side section of the bracket on mine had a thinner coating than average which is why scuff marks appeared but I can only judge from my own experience!

Another con for me is the fact Wotofo's marketing states the spine wrap is Leather which it definitely isn't, sometimes on mods when it is claimed the spine sections are Leather I am not 100% convinced but on this occasion the plastic like synthetic texture gives the game away! After saying that the wrap is very well cushioned and when adding the lightweight of the device and that it's quite compact I found it very ergonomic and one of the few dual battery devices I would use when out and about!

These days I do more MTL vaping and although I tend to use single battery devices I do sometimes like to use a dual battery device for extra battery capacity so for me a con that the wattage only adjusts in 1W increments, I don't mind 1W increments above 20W but much prefer more precision for MTL vaping, scrolling is also quite sluggish compared to most devices I have tested! I also got some rattle from the fire button which was a bit annoying and another major con for me is only up to 24mm atomisers will fit up top before getting overhang which is well below par for a dual battery device and will be a deal breaker for those who like bigger atomisers!

The buttons are nice and quickly and it fires with absolutely no delay but it did seem just slightly underpowered not just at the top end capabilities (as with most dual 18650 devices I doubt this will do more than 160w to 170w) but right the way through! I was testing it with a MTL RTA which was perfect for me at 15W on the previous 2 devices I used it on but on the MDura for the same vape I needed to be at 17W. So I set-up my Zeus single coil RTA and tested this on the same three devices, it was just how I liked it with the 0.29 build at 35W on two of the devices but on the MDura i needed it at 40W so I make that about 12.5% down on power which although it's not actually something that bothers me personally as I just set the wattage higher to get the vape I require is still a performance issue!

I do like that the battery charge is shown both by status bars and a percentage and that the colour of the display can be customised. I also like that the MDura has a Type C USB connection which is protected by a silicone plug, I would like to see this on all regulated devices.

To sum up, if that the device seems underpowered like me doesn't particularly cause you concern and you don't use large atomisers then the MDura is a nice lightweight, ergonomic dual 18650 option and one that will be liked by those who are not interested in TC and all the bells and whistles features but just prefer a set your wattage and vape device!




_________________________________________________________________________



Likes

Solid well made device
Ergonomic, padded spine, lightweight and compact size
4 Nice colour options
Aesthetically pleasing (in my opinion, those liking more plain devices might disagree)
Fires without any delay whatsoever
Nice clicky buttons
Simple user friendly device (no TC or extra features pro for some, con for others)
Whole device or just navigational buttons can be locked
Battery status shown for each battery as both a bar and percentage
Clearly marked battery orientation and battery door seems very secure
Colour of display can be changed
4 Digit puff counter that can be manually reset
Type C USB connection
2A charge rate
USB port has silicone plug
Supports pass-through

(Note: Can't say for certain if firmware upgrades are possible)


Cons

Durability issues with finish on bracket (mine arrived with scuff marks)
Spine wrap not Leather (dishonest marketing)
Atomisers over 24mm will overhang
Rattle from fire button
Device seemed about 12.5% underpowered (from what I experienced)
Wish wattage up to 20W would adjust in point 1 increments (subjective being a lower wattage vaper)
Adjustable wattage only (con for some pro for others)


I would once again like to thank Sourcemore for supplying the Wotofo MDura 200W Box Mod for the purpose of this review, thanks for reading and stay safe!

Wotofo MDura Mod 200W Box Mod


$25.89 - Wotofo MDura Mod
Code: MDURM

Disclaimer: I am not affiliated with Sourcemore or benefit in any way from the use of the above code but was asked if i would include it in my content!

_________________________________________________________________________

Looking to move these as a package. All are in very good, used condition and come with all spares. All three have BF and solid 510 pins. They have been scrubbed and ultrasonically cleaned. They are probably cleaner now than when new.

Goon LP - 24mm (ultem cap never used)
Rig Model 41 - 25mm
Vandy Vape Pulse X - 24mm

$58 shipped for all three. Payment via PP F&F. Thanks!

Oumier Wasp Nano RTA 2 polishes and upgrades its vape juice capacity of 2ml. What differs from the Wasp Nano RTA is that it can support expansion to 3.8ml. Additionally, it modifies the structure of its side airflow system via an adjustable ring to significantly fine-tune your airflow with its 24mm diameter. Super and high-quality stainless steel adapted, bringing the premium and comfortable texture, stylish appearance, and durable construction. It maintains an 810 drip tip that is easy to install and uneasy to fall off. Once installing on your kit, you will such this tiny RTA has a huge effect on your vaping journey.


Parameter:
Diameter: 24mm
Material: high-quality stainless steel
Capacity: 2ml
Configuration: Single Coil
Drip tip: 810 drip tip
Thread: 510

Features:
Durable Construction
Single Coil Configuration
Three Bottom Adjustable Airflow System
2ml Capacity, Support Expansion To 3.8ml
Top Filling Design

SMOK Solus Pod System Kit is a new pen-style pod system with exquisite and portable. SMOK Solus Pod Kit works with built-in 700mAh battery with max 16W output, it supports the all-day Use, it comes with a 3ml vape juice capacity, supporting refill your e-liquid via the side slot. According to the air inlet, when you inhale SOLUS by the sleek mouthpiece, it hits your taste buds with goodness, as well as bringing a smoother vapor. It also simply remove the magnet from the bottom of the pod, which provides the convenience for removal and replacement.

It first begins its journey about the mod of SOLUS. It utilizes a special and incredible LED indicator to play the role of observer and reminder, Flashing in different situations represents different information: when you start or off with your kit, it will flash. Flash two times when you vaping over 10 times because of the 10S over-vaping protection. Shining when you are charging by the micro USB connection, and flash to remind you of full charge. SOLUS features direct inhaling by automatically operated by the air press, delivering a hassle-free experience. All these features have an evolution forward in vaping and are going to surprise you once you hand it.

Parameters:
Size: 100* 21.5* 13mm
Material: Aluminium & PCTG
Battery: 700mAh built-in battery
Output: 4W-16W
Input Voltage: 3.3V-4.2V
Output Voltage: 3.0V-3.6V
Standby Current: <5uA
Resistance Range: 0.8ohm-3.0ohm
Charging Voltage: 5V
Charging Current: Max 0.5A
Capacity: 3ml
Coil: 0.9ohm mesh coil

Features:
Exquisite and portable
Internal 700mAh battery
Intelligent LED indicator
Air-activated
3ml capacity, side filling
Meshed coil pre-installed
Duck-billed mouthpiece
10s over-vaping protection

Z MTL Tank is especially designed for MTL vaping. It features top airflow system to provide MTL vapors with precise airflow control. The Z-level leakproof design can effectively prevent leakage. With top filling system, Z MTL Tank holds 2ml e-juice capacity and adopts stylish hollow-carved “Z”s Tank design to check the e-liquid window. It also uses the metallic shell to become more resistant to breaking. Z MTL Tank is compatible with GeekVape A Series Coil to bring you dense flavor and satisfying throat-hit.


GeekVape Z MTL Tank Giveaway, 1 winner, ends on September 21th

Enter here

Dear Vape Friends,

Squonk or not to squonk, What’s your choice?

Here comes Healthcabin new round of giveaway in September. We are partnering with Wotofo to giveaway brand new Profile Squonk Mod, which can be transformed into a non-squonker with 8 winners in total. Ends on 17th Sept. Come join us and win it home for free!

*Colors will be shipped out randomly if you are lucky to win!

About Wotofo Profile Squonk Mod
Profile Squonk Mod, brought to you by Wotofo & Mrjustright1. It is an 80W squonk mod, but it can be transformed into a non-squonker which is able to output 200W max power! Just take out the squonk bottle and add an 18650 battery there. So in single battery mode, it is a squonk mod, and in dual battery mode, it is a regular high wattage mod. Easy to switch and easy to use. Equipped with nexCHIP technology, the Profile Squonk Mod has an instant fire speed of 0.001s. And all safety protections are built in. The mod features a simple-to-navigate interface with 6 theme colors, plus fire key lock function, wattage lock function, and 2A fast charging through type-c port. The squonk bottle is 7ml in capacity, which is large enough for a long lasting use. It is made of 100% food-grade silicone with leak-proof seal design on the opening. All the solid and clicky buttons are placed on the mod with ergonomic consideration, comfortable to grip and easy to reach.



Join & Win
Finish the tasks below and win Wotofo Profile Squonk Mod home easily. Good luck to you all!!

Please click here to join: HealthCabin Giveaway or Wotofo Profile Squonk Giveaway | HealthCabin

Have you already been attracted by Freemax Marvos S 80W Kit? As for me, the outstanding feature of Marvos S 80W: this kit contains Marvos DTL Pod Tank with a 510 adaptor, so you can not only use Marvos DTL Pod Cartridge compatible but also use your favorite vape tank to match Marvos S 80W Mod.

Freemax Marvos S 80W Starter Kit has five colors available: Silver-Grey, Gunmetal-Red, Gunmetal-Yellow, Black-Black, and Black-Blue. So which color do you like best? Welcome to leave your comment below.

The Damn Vape Nitrous+ RDA is the newest 22mm RDA brought by Damn Vape and Koko Sarang, featuring a 1.5mL deep juice wells, this Damn Vape Nitrous RDA elevated postless build deck, and single or dual coil configuration.


Constructed from durable stainless steel, the Nitrous+ rebuildable dripping atomizer is one of the smallest available on the market, measuring in at a 22mm diameter with 1.5mL deep juice well. Using an elevated build deck with 4 deck based terminals, the Nitrous RDA by Damn Vape can install a single or dual coil configuration, offering two top caps to accommodate each coil configuration with differing airflows to cater to the installed coil configuration.


Features of Nitrous 22mm RDA
22mm Diameter
24mm with Beauty Ring
Stainless Steel Construction
Elevated Build Deck: 4 Deck Based Terminals
Side Secured Flathead Screws
Single or Dual Coil Configuration
PEEK Insulator
Reduced Flavor Chamber
Two Top Caps for Single or Dual Coils
Side Airflow Control System
Threaded BF Pin
810 Drip Tip


More details for this Nitrous+ Single/Dual Coil 22mm RDA, please check >> https://www.3fvape.com/51987-damn-vape-nitrous-rda.html

Today we brought a mechanical tube mod with side firing button, the Bestia Mods Furia Mechanical Mod Clone, This mod comes in 3 colors now, it is made from Brass or Copper and with black ring.





The Furia Clone Tube Mod is powered by 1 x 18650 / 20700 / 21700 battery (not included).


The Furia 18650 / 20700 / 21700 Tube Mod is with side fire and venting cap on bottom.


Featurs:
70mm height
28mm top diameter
Powered by 1 x 18650 / 20700 / 21700 battery (not included)
Side fire
Venting cap on bottom


To get this Bestia Furia Mod Clone, please check >> https://www.3fvape.com/51990-bestia-mods-furia-style-mechanical-mod.html

I just picked one of these up my 2 old mods decided to give
Up the fight

where can I buy the open notch coils,I ordered some coils from vape sourcing and they sent
Me these coils..maybe I’m missing something here

Uwell Caliburn series is one of the most popular product line from Uwell. Now we’ve got 5 generations.

The newest generation is Caliburn A2. Like former Caliburn series, Caliburn A2 also has a lightweight frame and slim design with two activated modes: button-activated and draw-activated. So Caliburn A2 is still burn for beginners.

Any improvements on Caliburn A2?
1. The most obvious change is that the Caliburn A2 has a visible window through the mod to make the e-liquid check easy.

2. Made of Aluminum alloy material, the Caliburn A2 is lighter than the other versions.

3. The price of caliburn A2 is more competitive. As for the flavor, you can always trust the flavor of Uwell caliburn series!



Cartridges
For Caliburn A2 Pod, Uwell has redesigned the replacement pod cartridges using the latest PRO FOCS Mesh Coil technology. The built-in FeCrAI UN2 Meshed-H 0.9 Ω Coil can bring you authentic flavor. The new mouthpiece can provide a more comfortable fit in the mouth. To give vapers a better drawing experience, Uwell has never stopped her steps. With this design, vapor won’t drift away from the mouth, reach vapers’ biggest satisfaction.



Main Features:
1. New Caliburn A2 Cartridge, top filling system, with visible window
2. FeCrAI UN2 Meshed-H 0.9 Ω Coil, to provide authentic flavor
3. 520mAh built-in battery,output power 15W, direct draw/button draw
4. Aluminum Alloy material, smoothing, polishing and comfortable grip

What You Can Get From Caliburn A2?
1 x Caliburn A2 Pod System
1 x User's Manual
1 x UN2 Meshed-H 0.9Ω Caliburn A2 Refillable Pod (Pre-installed)
1 x UN2 Meshed-H 0.9Ω Caliburn A2 Refillable Pod (Spare)

Want to clarify the similarities and differences between the three products more clearly? Please see the the sheet below.


Uwell Caliburn A2 vs Caliburn G vs Caliburn


Which version do you prefer? Welcome to leave your comment below.

Learn More about Uwell Caliburn A2

ElegoMall provides worldwide shipping and competitive price for all the customers, register on ElegoMall now to get your new user coupon and enjoy better price of more latest vape kits.

And for any inquires of uwell wholesale or any vape wholesale in China, feel free to contact ElegoMall.

We got your feedback requesting a new PockeX version and after a long product development, the PockeX box is now available! The new PockeX box is an ultra-compact box mod with a sleek new creative design and adjustable airflow.

Aspire PockeX Box features:
1.Pod capacity: 2.0 ml /2.6 ml.
2.The PockeX Box is a wonderfully built side-by-side mod that offers a more integrated look than its predecessor..
3.PockeX Box utilizes the classic and beloved PockeX unique U-tech coil technology to ensure that vapers will still be able to appreciate an intense flavor.
4. The airflow control ring allows you to adjust the airflow from high airflow and cooler vapor or low airflow with more flavor.
5.Slide the top cap to reveal the filling hole and fill the tank with your favorite e-liquid. Ultra-easy and convenient.
6. PockeX Box is powered by a built-in 2000 mAh. This high capacity ensures that your PockeX Box will last you through the course of a day prior to needing a charge.
7.2 A Type-C charging.
8. 3 color indicator lights for the battery level, it reminds you to charge your PockeX Box timely.
9. Aspire ASP chipset safety protection.

A couple weeks back, I purchased the Geek Vape L200 Aegis Legend 2 200W Starter Kit online. Today I lost the drip tip. I don't want to do an online order for only a drip tip because of the cost of shipping and the wait time. Will most local vape shops have a drip tip that is compatible with my device?

Do you find it hard to quit smoking? Do you have trouble kicking the habit but want to experience new flavors?
The Aspire Vilter pod kit, equipped with an artificial paper filter drip tip, creates a brand new experience for you to enjoy the full taste of your favorite flavors.
With the Vilter, Aspire have created the most comfortable and simplest transition from smoking to vaping.
Aspire Vilter features:
1. Pod capacity: 2 ml
2. Vilter uses premium 1.0ohm mesh coil heads in conjunction with the perfect airflow for an intense and rich flavor experience
3. Equipped with an artificial paper filter drip tip, gives the familiar feeling of a cigarette filter and creates the most comfortable and simplest transition from smoking to vaping
4. Large battery to help achieve a great performance and longer run time, battery capacity: 450 mAh
5. Auto draw, make vaping simple
6. Easy bottom fill
7. 3.7V constant output
8. Type-C quick charging
9. Strong magnetic connection
10. Aspire ASP chipset safety protection

Just curious how many of us are left besides myself.

I received wotofo mdura from health cabin for the purpose of this review.

Wotofo Mdura colors:

- King Kong Black
- King Kong Blue
- King Kong Orange
- King Kong Red





Specifications:

- Dimensions: 82mm*52mm*26mm
- Display: 0.96" TFT screen
- Battery Type: Dual 18650 batteries (not included)
- Power Range: 5 - 200W
- Charging Port: Type-C
- Charging Current: DC 5V/2A


1* MDura Box Mod
1* Type-C Charging Cable
1* User Manual















Wotofo mdura is mod that is powered by two 18650 batteries and this mod works from 5-200w. Dimensions of the mod are 82mm*52mm*26mm and in my opinion size is quite good. I really like the design of the mod and because of the shape and back of the mod, it is pretty much comfortable for using. Mod is also pretty lightweight but quality is very solid.







From the top of the mod you can see the connection and it is slightly rasied which should protect the mod from scratching from atomizers. Connection is screwed from the top and looks really solid, threads here are good.
This mod is powered by two batteries and it works from 5-200w. From one side of the mod you can see usb port, we have here usb c port which is really nice and this device supports balanced charging which is good since you can use this mod to charge your batteries if you charger is not available. Battery cap is from the bottom of the mod. Considering the shape of the mod it would be better that cap is from behind in my opinion. So far battery cap works good but I know that many people prefer battery cap from behind on this type of mods.








From the front side of the mod you can see the fire button, screen and buttons. The fire button is good and clicky, plus and minus buttons looks good as well. We have color screen here which is good and brightness of the screen is good so you can see everything on the screen without problems here.

On the screen you can see:

- Battery indicator
- W
- Ohm
- V
- Puff
- Time

We have here only vw working mode which is for me good because I don't use other working modes but for someone this could be a con, anyway for people that are looking for simple mod this will be very good.
You can lock the fire button here when you click 3 times on the fire button, you need to do the same to unlock it. Also you can lock buttons only when you press plus and minus buttons together, you need to do the sam to unlock them. You can change the color of the screen which is really nice and to do that you need to hold the fire button and minus button. To reset the puff counter you need to press plus button and fire button on this device.










My thoughts:

So, in my opinion this mod looks really nice, mod has nice size, I like the design and also I like the back side of the mod, all of that makes this mod really comfortable for using. Build quality is solid and mod is lightweight. We have usb c here which is great and mod has balanced charging which is nice if you want to charge your batteries when charger is not here. Battery cap so far is good and I didn't have any problems but it would be better if battery cap is from behind. When batteries are inside the mod there is no any rattling which is good. The fire button and buttons are good and si far I didn't have any problems. We have nice color screen here with good brightness and we have all the informations that we need on the screen. You can also change the color of the screen which is nice. Mod so far works really good, I tried it with different atomizers at different power and there is nothing to complain about. In my opinion this is one simple mod that is very comfortable for using, few cons for someone maybe but I think that this mod is quite good.

I would rate this device 8.5 out of 10


Cons:

- Battery cap from the bottom of the mod, anyway it is good so far
- Only vw working mode which is for someone good


Pros:

- Build quality is solid
- Good design in my opinion
- Mod is very comfortable for using
- Buttons are good
- Mod work good so far
- You can change the color of the screen
- Usb c
- Simple for using
- Color screen
- Balanced charging


Thanks Health cabin
You can buy it here: Mdura

HealthCabin is also one of the biggest vape wholesale distributors in China, if you're a vape business owner, just contact them to get competitive wholesale price.

I bought the Voopoo drag 2, but apparently they have removed the screen customization feature some time ago in the newer version, if you have the older voopoo software where which has the customization button, could you send me it? I'll give you 5-10$ for it, if I can customize my screen with it. Right now my software has that customization button, but the moment I plug drag 2 in, the customization button dissapears