I love this stuff. I have many of the little bottles from TPA, and have been trying to get something close to what they used to make in the local vape shop by my house.
I've rifled through older threads about this, but they're not very clear about origin, dilution, etc.
Does anyone here know what percentage would give me the maximum AP flavor? On a chart, one said .28. However, it's not close enough for what I'm looking for.
Any suggestions would be appreciated. Thank you.

New Arrival | Lost Vape UB Lite Pod Kit



Product Features

VIVID & ROBUST FLAVOR DELIVERY
Compatible with the whole new UB Lite Series Coils, you can easily to chase your favorite taste and enjoy the ultimate flavor experience.
AIRFLOW CONTROL SLIDER
Adjust the airflow toggle to customize your phenomenal MTL & DL draw and feel the flavor and intensity from UB Lite series coils.
DRAW/BUTTON ACTIVATED FIRING
Featuring a visually-striking pod design, the UB LITE Pod supports both Draw and Button activation.
MAXIMUM 30-WATT OUTPUT
Despite its compact size, the UB LITE Pod can deliver ample power to support the 30W max output.
BUILT-IN 1000mAh BATTERY
Combined with the built-in 1000 mAh battery, the UB LITE Pod Kit is designed for a full day of vaping, which can fit perfectly in the palm of your hand.
TYPE-C FAST CHARGING
The UB LITE Pod has a built-in DC 5V TYPE-C port. Connect the Type-C port to a power source, the LED Indicator will show with different colors refer to battery levels.
EASY SIDE REFILLING DESIGN ( 2ML)
The cartridge of the UB LITE Pod has a side refilling system and 2ml E-liquid capacity, which is easily set up with a nice plug and refill system.
SMART COIL DETECTION
UB LITE Pod will automatically detect the coil resistance and provide the recommended power output. When installed a new coil, put the pod into the device, the LED indicator shows different lights accordingly.
MULTIPLE PROTECTIONS
①Short-Circuit Protection
②Weak Battery Protection
③Over Heat Protection
④10 seconds over-time protection

Package Content:

• 1x UB Lite Pod Kit
• 1x UB Lite L1 0.4ohm Coil
• 1x UB Lite L5 1.4ohm Coil
• 1x Type-C USB Cable
• 1x Lanyard
• 1x Warranty Card
• 1x User Manual

New Arrival | GeekVape Obelisk 120 FC Z Kit


Features
-The world's first vape with safe fast charging
-Portable power supply
-Internal 3700mah battery(dual-cell 2* 1850mah), 15min fast charging
-USB PD Safe Charging
-USB-C Direct Charging
-Ultra-long Battery life
-OTG Reserve Charge
-Geekvape Mesh coil brings purer flavor and great clouds
-Direct Top Airflow & Top-to-Bottom Airflow with leak-proof function
-Updated fill port design for liquid spillage resistance
-Quick slide coil design for easy operation
-Overheat Protection
-Low Temperature Protection
-Triple Overvoltage Protection
-Low Voltage Protection
-Charge & Discharge Overcurrent Protection
-Circuit Short Protection
-Low Ohm Protection

Parameters

• Size: 27* 48.4* 130.2mm

Z Tank(Zeus Tank):

• Size: 26* 42.5mm(no drip tip)
• Capacity: 5ml/3.5ml
• Drip tip: replaceable 810 drip tip
• Coils: Z 0.2Ω mesh coil(Pre-installed, 70-80W)
• Z 0.4Ω mesh coil(50-60W)
• Thread: 510

Obelisk 120 FC Mod:

• Built-in Battery: 3700mAh
• Output: 5-120W
• Mode: Power/ TC-SS/ TCR/ VPC/ Bypass/ OTG
• Screen: 0.96-inch TFT Color Display
• Temperature range: 200F-600℉/100C-315℃
• Fast Charging: 65W PD Fast Charging (20V/3.25A, 15 mins), Over 300 Times Cycle Charging
• Regular Charging: 5V, Max 2A
• OTG Reserve Charging: 5V, Max 2.4A (Auto Stop Charging, Back to Previous Working Mode)
• Longest Vaping Time: 10S
• Working Temperature: -10-60℃
• Charging Port: USB-C

Charger:

• Type: Wall Charger with Interchangeable Adapter (US / UK / EU Version)
• Output Voltage: 5V, 3A/9V, 3A/12V, 3A/15, 3A/20V, 3.25A
• Input Voltage: 100-240V
• Fast Charging Protocols: Support PD2.0, PD3.0, QC2.0, QC3.0, QC4.0
• Certificates: CCC, UL/CUL, FCC, CB, CE, SAA, RCM

Package Content:

• 1 * Mod
• 1 * Atomizer (5ml)
• 1 * Interchangeable Plug
• 1 * USB-C to USB-C Charging Cable
• 2 * Geekvape Z Series Coil (Pre-installed: 0.2Ω 70~80W, Spare coil: 0.4Ω 50~60W)
• 1 * Coil Tool
• 1 * Spare Parts Pack
• 1 * Spare Glass Tube (3.5ml)

Hi y'all, noob here.

I 'MTL' only nic salts, and have been using Vaporesso Renova Zero for a while. I love the size and features, but frankly the pods SUCK. I mix my own flavorless juice, and the pods usually 'burn' after a day or two (or less). And they're not cheap (like $2.50 each). I've tried both the 'ceramic' and the 'mesh' coils.

So I'm looking for something with better & cheaper easy to replace coils ... but prefer something small.

Looking at Aegis Boost and Voopoo Vinci ... any advice or other suggestions?

I really prefer (not sure what it's called) when you draw to fire, I do not like having to push a button.

Just heard the term "RBA" ... if I get RBA for Boost ... then I can replace coils more economically?

Thanks for any advice/suggestions!

I need 2 provari boxs, also I'd be interested in custom end caps and red or black extension rings.
I'll pay with PayPal, f&f needless to say we won't mention vape.

Hello peeps I usually use cotton bacon prime but I saw this dovpo vipers cotton and wanted to give it a try...

First look I see its threads or hairs I don't know how to call it are thinner than the cotton bacon prime I used to use..
It's much softer on the touch and so I gave it a try....at first felt nice to me the way it looks and feels in the hand... Even tho I noticed it's much easier to test apart I guess cause of thinner fibers...

Anyways when I tried vape it tho I don't get much flavour...like veeery muted...
I actually never believed that a cotton can make much difference in flavour except that maybe it would affect flavour a bit make taste different or something and still now can't believe how it is sooo bad for me...
I use it on 2 attys ATM and it's the 3rd day using it and rewicked also one time in case I did something wrong or something...even tho I know those attys good and my builds are always the same...
It doesn't give me much flavour and also it's like it leaves me a weird taste like cottonish to something...
Also I feel like it is kinda resistant to burning maybe.... I pumped up the wattage very high for my build just to see how it feels and I didn't got dry hit even tho I wanted lol... Just that weird taste was stronger....

I was wondering if anyone ever tried this cotton again....just curious what are your thoughts

Check this video, hahaha, when a smoker transit to vaper! lol

Do you have similar experiences? lmao

There are 2 body colours to choose from – Gunmetal and Stainless Steel. Then you choose from the battery sleeve colour – there are 6 options and these are interchangeable – Forest Green, Peacock Blue, Puzzle Purple, Ruby Red, Ink Black and Carbon Fibre.
OBS Engine 100W Starter Kit is the world's first replaceable battery sleeve 21700 box kit, which combines Engine 100W Mod with Engine S Tank. OBS Engine box Mod is powered by single 18650/20700/21700 battery with 2A Type-C fast charging and can fire up to max 100W output. And OBS Engine Mod is equipped with 0.96 inch LED Screen to show vaping data clearly. The OBS Engine 100W Kit has a zinc alloy frame and a battery sleeve made of resin in different colors. There is a transparent panel on the back of the fuselage, which can be displayed according to the color of the internal battery sleeve.The fast-reacting chip can output up to 100 watts of power, so it can easily trigger a resistance of different coils.

OBS Engine S Tank comes with new E series mesh coils and 6ml capacity with top filling design. And OBS Engine S utilizes adjustable bottom airflow control system for excellent flavor. OBS Engine S Tank has an impressive 6mL e-juice capacity. You can fill that tank with your favourite sub-ohm vape juice and enjoy puff after delicious puff offered by the enhanced airflow.Coils are easily installed in the Engine S Tank via a threaded connection. Two kinds of mesh coils combined with a wide drip tip and airflow adjustment system, for a DL (direct-lung) vape full of warm flavor and huge clouds of vapor.

-----------------------------------------
Free Shipping vape devices
New Arrivals
Clearance
Daily Deals
Box Mods
IN STOCK VAPE DEVICES
$0.01-$19.99 Cheap Deals
Coupon Codes

Suorin Trident is one of the fastest firing speed Pod Mod. Trident is powered by a single replaceable 18650 battery (not included). To replace the battery, just unscrew the battery cover on the bottom of the device. Equipped with a Type-C port to help optimize charging efficiency and service life. Drive vaping passion with efficiency. Suorin Trident uses an intelligent ORI chip internally, which adds a new look to voltage regulation-automatically achieves a perfect balance between wattage and mesh coil, and you can also adjust it from 5W to 85W according to your own preferences. With the function of voltage management, power distribution, temperature management, and atomization monitoring, the ORI chip can accurately control and manage the entire process of atomization. ORI chip can also be compatible with different atomization coils such as single mesh and triple mesh coil, ensuring you the best performance of atomization. In addition, it is also equipped with an innovative boost converter: constant voltage output for steady performance even as your battery level goes down.



Features:
1. 18650 Replaceable Battery
2. Type-C Fast Charging
3. 5-85W Output
4. Constant Voltage ORI Chip
5. 0.006s Extreme Ignition
6. Boost Converter
7. 0.96in Color TFT Display
8. 4.4ml Transparency Cartridge
9. Bottom Filling System
10. TRI Single Mesh 0.4ohm & TRI Triple Mesh 0.2ohm
11. TRI RBA (optional)
12. Dual Airflow Adjustment
13. Reliable Security System
14. Designed for direct lung (DL)
...

Click here for more:

Suorin Trident 85W Kit: Suorin Trident 85W Pod Mod Kit 4.4ml

https://www.2fdeal.com/search/?Keyword=auguse+era+pro&CateId=Auguse Era Pro 22mm RTA w/Airpins 4ml

Features
510 threading connection
Single coil configuration
Dual posts design
Bottom airflow and side airflow system
4 customizable airflow sizes for the side airflow: 0.8mm, 1.0mm (pre-installed), 1.2mm, Holeless
Comes with 1.0mm airflow pin for the bottom airflow
AFC ring with 7 level airflows: 1.6mm x 3.6mm, 1.8mm, 1.6mm, 1.4mm, 1.2mm, 1.0mm, 0.8mm
Size: 22mm x 64.5mm (with drip tip)
Capacity: 4.0ml
Filling method: Top filling system


https://www.2fdeal.com/search/?Keyword=rds&CateId=Hotcig RDS 80W TC 18650 Pod Kit
The Hotcig RDS TC Pod Kit applies the dual system to the extreme. Powered by a single 18650 battery. The applies the Hotcig RDS fires to a maximum output of 80W. The Hotcig RDS is compatible with both pod system and box mod system. Just install the included 510 adapter, you will switch the Hotcig RDS Pod Kit to a 80W TC Box MOD. The Hotcig RDS RM Cartridge has 4.2ml/4.5ml large capacity and replaceable coil installation. The pack comes with two meshed RM coils of 0.3ohm and 1.2ohm for your selection. With Type-C quick charge, you will hold a relaxed vaping. The Hotcig RDS 80W TC Pod Kit will bring you wonderful vaping.




https://www.2fdeal.com/search/?Keyword=Rook&CateId=ULTON Rook Style 22mm RPGA Mesh/Cotton Deck w/BF Pin 3ml

Package Included
1* ULTON Rook Style 22mm RPGA 3ml
1* Bell Cap for Cotton Use
1* BF Nano Kit (1.5ml)
2* Drip Tip with Different Sleeves
1* Accessory Bag
Bonus Accessory:
2* Cross screw (for deck)
3* Airflow insert (for deck) 0.8mm, 1.0mm, 1.2mm


https://www.2fdeal.com/c/510-drip-tip_0498ULTON 510 MTL Drip Tip 4pcs

OXVA Arbiter Solo RTA is a leak-proof top-down and side airflow (3D) RTA with a unique dual airflow system. Just turn the top ring to switch between MTL and RDL.

Parameters:
Dimension: 25 x 56.5mm
Capacity: 4ml bubble glass & 2ml straight glass
Material:SS & Glass
MTL holes:0.8/1.0/1.2/1.5/1.8mm
Drip tip:2 kinds of 510 drip tips

The most effective use of the internal space, the smallest chamber, the MTL airflow at the bottom and the 3D RDL airflow are combined to ensure the best flavor experience in the MTL and RDL atomization process.

OXVA Arbiter Solo RTA has a dual airflow system: top-to-bottom airflow for MTL and top-to-3D airflow for RDL, switched by rotating the top cover ring. OXVA Arbiter Solo uses top AFC, which is almost completely leak-proof, and the interior is compact, bringing the best flavor.

The Arbiter Solo vape RTA made by SS&Glass has a 25mm double column production platform and 4ml pre-set bubble glass. It also includes an additional 2ml straight glass. Arbiter Solo easily supports top betting and contains 2 510 different drippers for MTL and RDL vape.

Other kits you may be interested:
eleaf istick power 2 for sale
wotofo troll x rta for sale

YiHi SXmini SX Auto Pod Kit>> is powered by internal 1400mAh battery and the advanced SX685J chipset, SXmini SX Auto Pod Kit will automatically detect the SX ADA atomizer, but you may also set the mod to the DIY mode for use with the rebuildable version of the SX ADA (Sold separately).ESS Driver Technology, and presents itself in a fusion of form and function to create one of the most advanced pod mod kits to hit the vaping market segment.Holding up to 3.5mL, the reservoir is completely sealed when installed to eliminate any possibility of leaky juice that could otherwise ruin a vaping session.



Parameters:
Size: 81.8x 48x 20.3mm
Battery capacity: Built-in 1400mAh battery
Output Range: 10.5-30W
Temperature range: 356℉-500℉/ 180℃-260℃
ADA Atomizer: SX-ADA 0.4Ohm SS316 for DTL, SX-ADA 0.6Ohm SS316 for MTL
Modes: TC (P1/2/3)
Chipset: SX685J
Tank material: PETG
Tank capacity: 3.5ml



Features:
-All in one auto squonking pod kit
-Support rebuildable auto dripping atomizer (Sold separately)
-PETG Plastic Reservoir Construction
-OLED Display Screen
-MicroUSB Port



Package:>>
1x SX Auto Pod device
1x SX-ADA 0.4Ohm SS316 for DTL
1x SX-ADA 0.6Ohm SS316 for MTL
1x Micro USB cable
1x User manual

Innokin Sensis Find-F 40w
Hi everyone, this is the link to my review, thanks for reading

Freemax Marvos T 80W Vape utilizes stainless steel material on the connected section of Marvos DTL Pod and Marvos T 80W battery, which can effectively prevent rust and make vaping healthier. As for the Marvos DTL Pod, it is the Pod Version of Fireluke product line! What's more, you can choose the Marvos PCTG Pod or Glass Pod (Sold Separately) to support Marvos T 80W Kit.

Hey guys. Today let's check out another new pod vape named Vabar One. It adopts a minimalist appearance design with a glass screen which makes it fashionable and stylish! Here we go!

Vabar One is an open refillable pod system, which can use 0-50mg nicotine juice. There is no button on the device, so it will not be started mistakenly in your pocket. Powered by a built-in 550mAh battery, Vabar One provides uninterrupted vaping that lasts for several days. The middle of the front panel of the fuselage has the Vabar brand logo shape LED indicator for used to instruct the current battery level. Quickly charge through the Type-C port at the bottom of the device. The device will be fully charged within only 10 minutes. Vabar One is designed with a lock function.

Simply plugging in and out the vape pod 5 times within 3 seconds will allow you to lock and unlock the device easily. This function will help you stop your children or pets from misuse. Every time a pod is inserted into the device, the indicator light will turn on for one second and then go out. The Vabar One package comes with an integrated 1.3Ω mesh coil refillable pod, with a capacity of 2ml, which can be refilled by opening the sealing plug on the side. Applied with the most high-quality environmental materials such as pure natural organic cotton and PCTG juice container, it can guarantee you healthy vaping!

Get it here: Vabar One Pod System Kit 550mAh

You may also like:
helix bar max review
hyppe max flow mesh price

Hi folks,
Am new to this DIY world but am willing to learn. I am interested in hearing which flavor companies have the highest quality of flavors (ie as close to the “real” thing as possible without a bunch of weird additives)? I have visited a couple of sites but haven’t found ingredient listings and perhaps I am just lazy. Haha

Any suggestions would be appreciated. Thanks in advance.

Have you ever used Wax Vaporizer Uk?Today I have a new product for you, the Airis Dabble Dual Use Wax Vaporizer Kit uk. When you see it, you will be amazed by its unique shape design.There are four colors for you to choose: Black /White /Gradient /Rainbow.Let's take a look at what it does.

The all new 900 mAH Dabble by Airis a dual use wax vaporizer uk that is glass .... compatible with hands free-auto heating and variable temperature settings. You can use it on the go as a dab pen or universally in an 14mm or 19mm glass .... to enjoy at home!

With the newest and patented Quartz Coil heating technology we guarantee pure taste with every hit. You can easily switch between hands-free auto heating mode and manual heating mode with the press of a button. Variable voltage allows you the capability to heat your wax using three different voltage options (3.4V | 3.7V | 4.2V) and find out which setting is best for you.Please click uk vapesourcing to learn more details.

SPECIFICATION
Size:106mm*39mm*28mm
Use for:Concentrate only
Battery Capacity:900mAh
Weight:225g
Input: DC 3.2--4.2(V)
Standby Current:≤ 5uA
Resistance:≥ 0.8Ω
Voltage:Red = 4.2V; Blue = 3.7V; Green = 3.4V
Start Charging Indicator: Plugin the USB charger, the red LED stays bright which means start charging.
Charging Port:Micro USB Charging Port
Full Charged Indicator:A solid red indicator light will illuminate while charging and will shut off once charging is complete.
Coil Type:Quartz
Color:Black /White /Gradient /Rainbow

Quick Link:Airis Dabble Dual Use Wax Vaporizer Kit 900mAh

Today we gonna talk about Steam Crave the first DNA 4s LIPO Mod, named Steam Crave Hadron Pro DNA 250C Box Mod, working with 1600mAh changeable battery enough to fire up to 400W.

Steam Crave Hadron Pro DNA 250C 400W VW Variable Wattage Vape Box Mod is monitored by DNA 250C Chipset, thus supporting watts boost VW 1~400W and accurate temperature control TC 200~600'F. In addition, Hadron Pro Mod supports replay mode, under which it allows you to capture the flavor and satisfaction of the "perfect puff", and provides the same level of performance and consistency for all subsequent puffs. Equipped with a 0.9 inch TFT screen and constructed from durable zinc alloy, Hadron Pro DNA 250C VW Box Mod is compatible with most atomizers with 510 threading connection, like Steam Crave Aromamizer Ragnar RDTA (not included).

510 threading connection
Powered by a changeable built-in Battery (Li-Po 1600mAh, 4s)
Evolv's DNA 250C Chipset
Watts Boost, Replay Mode, Accurate Temperature Control, Preheat
Maximum Output 400W (1~400W)
0.9" Full-Color TFT Display Screen
Zinc Alloy construction
Vapor Mode: VW, VV, TC, TCR, Bypass
Dimension: 116.1 x 59 x 36.7mm
Input Voltage: 6.0~16.8V
Temperature Range: 200~600'F

More details about Steam Crave Hadron Pro DNA 250C 400W VW Box Mod, Please Check >> https://www.3fvape.com/49731-steam-crave-hadron-pro-dna-250c-400w-vw-box-mod.html

I'm an Old-Timer on this site, quit smoking 11 years ago with the help of Smokeless Image and my pretty Volts. Now I've been sneaking hits off friend's cigarettes and my daughter's Juul.
I love the idea of the small, extra simple Juul. Can anyone tell me about similar brands, pros and cons, prices?
Weird to be back here, can I blame it on Covid?!
Thanks.

Vapefly Galaxies 30W Kit


Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop

Innokin Sensis Find-F 40w

Innokin with its fourth generation "Find F" vape technology hidden inside its chipset, presents a technological update that would extend the life of the coil and increase the flavor by searching for the right frequency (Hertz) during the Vaping for an experience unrivaled.
Enjoy the reading.

Packaging:
The package consists of an outer sleeve and a 100% recyclable box underneath containing the product. The outer sleeve shows the photo of the device and the warnings on the front. On the back there are additional warnings, the packing list, the scratch & check, the Qr-Code and the address of Shenzhen Innokin Technology Co., Ltd.
On the sides are show the word Find-F, the name of the product (Sensis) and finally some of the main features are listed.





Package contents:
1x Innokin Sensis Mod 3.000mAh
1x 3.1ml 100% Pyrex glass cartridge
1x Magnetic 510 Tank Adapter
1x S-Coil 0.25Ω Range 25-35W RDL (pre-installed)
1x Scepter Coil 0.65Ω Range 9-12W MTL
1x Spare MTL Drip-Tip
1x Spare O-ring
1x Base / Coil adapter
1x Type-C charging cable
1x User Manual
1x Warranty certificate



Innokin Sensis Pod Kit Specifications:
• Body material: Zinc alloy
• Device dimensions: 120.35x39.51x30.0mm
• Device weight: 160g
• Pyrex tank capacity: 3.1ml
• AFC: Adjustable MTL / RDL
• Refil: lower with silicone plug
• Coil Compatibility: Scepter
• Battery: Integrated 3.7V ， 3000 mAh / 11.1 Wh
• Power range: 6-40W
• Voltage range: 1-7.5V
• F (Ø) Mode
• Coil + Mode
• Refresh Mode
• Adjustable Cut-Off: 5-180s
• Max output current: 20A
• Resistance range: 0.2Ω-3.5Ω
• Charging current: 5V-1.7A.
• Charge indicator: ＜ 20% - Red; 20% -50% - Yellow; ＞ 50% - Green
• 100% recyclable packaging



Available colors:
Carbon, Jet Black, Desert Brown, Ultra Pink, Navy Blue.



First impressions:
Innokin certainly deserves a plus for being the first vape company to use eco-sustainable and 100% recyclable packaging, also the sachets that contain the coils and the spare part's are biodegradable.

In addition to the classic content, inside the package I found a very useful 510 magnetic adapter that allows you to install your favorite tank in view of a max 40W use, therefore always in the context of an MTL / RDL Vape ... This is a very smart choice for a long use before recharging thanks to the presence of an internal "big battery" with a capacity of 3,000mAh!

The form factor of the Sensis Find-F follows the one currently very in vogue of many Aio devices massively present on the market. However there are some Plus such as the 100% pyrex Tank with replaceable 510 Drip-Tip, the adjustable AFC, the very comfortable Fire button with integrated display, the Type-C charging port and finally a very good general level of finishes with a high degree of handling of the device.



Side view:
I received the Navy Blue version for this review and it is definitely my favorite along with the Jet Black version, yes I know I'm lucky!
On one side of the device there is the inscription "Innokin" while on the opposite side "Sensis" appears. An "Aegis" style metal frame completely embraces the leatherette insert and is screwed to the Mod via 6 Torx screws. The blue frame (like leather) elegantly fades downwards to black. At the top there are two opposing slots that each contain a small semi-hidden hole, these holes are used to suck the air towards the coil and are part of the AFC system with regulation which is positioned on the back of the Mod.



Front and back:
The front is particular, with a single and convenient large button that incorporates the display and the Up / down adjustment buttons, the Usb-C socket is positioned in the lower part of the Mod and allows recharging in an upright position.

At the top of the display are the mode and the battery level indicator with the wattage in larger characters, in the center and depending on the mode you are using there is a wave-shaped graph. At the bottom of the display are the duration of the last Puff, the coil resistance, the Puff counter.
In F (Ø) mode, the set frequency is shown.

On the back of the mod at the top and in the central position there is the AFC control system controlled by a metal knob, the system acts directly on this slot and on the two side holes. On the leather cover we find a hot stamped "F" bordered by artisan-style stitching



Over and under:
The compartment / pod is made with the metal ring system already seen on other devices, this system allows you to magnetically attract the cartridge and provide a solid base for the connected AFC system. The metal ring is fixed to the mod by 3 torx screws and can be disassembled for periodic cleaning operations.
On the bottom of the compartment / pod there are floating contacts for electrical transfer, there is no automatic puff system.

In the second image we can see the 510 adapter installed, I really like this option which I think is very useful, congratulations Innokin!

On the bottom of the Mod there are logos and legal marks, the characteristics of the generous internal battery are also indicated.
This part forms a solid footing for this unit.

Looking for the ultem or yellow plastic insert that go's in the top cap that holds the driptip..

If anyone has a spare or spare cap with the insert hit me up..

I know Im always looking for the unobtainable but you never know...

Sent from my SM-G950U1 using Tapatalk

Hey all. So before the mail ban I ordered 2 gallons of unflavored ready to flavor juice. I had being ordering 80/20 for years but they ran out so I had to get 70/30. Turns out it really aggravates my throat and I cant vape it without constantly having to clear my throat. I was planning on buying some food grade PG and up the mix from 70/30 to 80/20. My question is how would I go about doing it? I assume it would be a little over a gallon correct? Can anyone help figure it out?If not I have 2 gallons of juice I cant use. Thanks so much!