The Womper Woom, Womp it again Sam.

Status
Not open for further replies.

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
The Rebel is dead as a door nail.

But it's a nice case. Anyone know of a place that can install a new chip??
Rebel, Rebel, you've torn your dress...

If it is the board, Evolv will replace it under warranty, contact them for a RMA. Much easier than shipping it back to the UK.

EVOLV - Home

You could have had 2 more Drones for the price of that thing. :D
 

coolerat

Ultra Member
ECF Veteran
Verified Member
Mar 20, 2015
2,401
8,361
Verona,NY
I'll prolly try and contact them but honestly they didn't market this to Americans so its not really there fault I'm so far away. It also seems to be an Evolve problem. Research shows its a fairly common problem.

If I go the Evolve route don't I have to remove the chip?? I can do that.

As to buying more Drones I actually would but I can't find one.
 

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
I'll prolly try and contact them but honestly they didn't market this to Americans so its not really there fault I'm so far away. It also seems to be an Evolve problem. Research shows its a fairly common problem.

If I go the Evolve route don't I have to remove the chip?? I can do that.

As to buying more Drones I actually would but I can't find one.
I don't think you would have to remove the board, but a quick email to helpdesk@evolvapor.com will let you know what they need.

VapeSix has Drone's.
Lost Vape Drone DNA166 BF Squonker Mod
 

listopencil

Ultra Member
ECF Veteran
Jun 28, 2017
2,134
8,332
In Partibus Infidelium
Ugh. For the past month or so I've wanted the KT Dripbox 160 and the Coilmaster DIY V3 kit, plus a few odds and ends from MVS. So far I can't seem to catch them both in stock at the same time. The KT DP 160 is in stock right now. Just waiting on the tool kit.
 

coolerat

Ultra Member
ECF Veteran
Verified Member
Mar 20, 2015
2,401
8,361
Verona,NY
I don't think you would have to remove the board, but a quick email to helpdesk@evolvapor.com will let you know what they need.

VapeSix has Drone's.
Lost Vape Drone DNA166 BF Squonker Mod


Finally had time to contact Evolve. We'll see how that goes.

Still using patched together Drone. Could have been a great mod with better button and maybe drop some weight.

I had a couple Wrraiths but gave one to my son. May get a couple more. Man for 30 bucks the Wraith is the snizznet.

Debadoo, I've had Reo's and two issues. I HATE THE TOP BUTTON and single battery mods are best in the hands of tootle puffers. In use mechs around the house but away from home I like a couple batteries. So nothing Reo currently has interests me. Boxer OTOH has a couple things.....................
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
Ugh. For the past month or so I've wanted the KT Dripbox 160 and the Coilmaster DIY V3 kit, plus a few odds and ends from MVS. So far I can't seem to catch them both in stock at the same time. The KT DP 160 is in stock right now. Just waiting on the tool kit.
that's frustrating. When I do flavoring orders, I try to make large ones.......hate paying as much for shipping as I'm paying for 1 or 2 bottles of flavor. Each time I've done it, wherever I'm ordering from has been outta lemon sicily. Been trying for a couple years to get some. Finally bought a 4 oz bottle of TFA lemon, hope it's good. Have some juice made up waiting to try.

Debadoo, I've had Reo's and two issues. I HATE THE TOP BUTTON and single battery mods are best in the hands of tootle puffers. In use mechs around the house but away from home I like a couple batteries. So nothing Reo currently has interests me
Jup, I'm mostly messin with folks when I talk constantly about Reos. They aren't for everyone I know. Some folks like more than what a mech will do, although some Reo users do vape like .1 or .2 ohms. Rob had to make a better button for those who melted the buttons lol The p-67 solves the top button issue though, it's on the side and the sides of the mod are rounded. Same shape as the 2015 woodvils. It's so much nicer in the hand!
 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
A very quick fly by, only read the last page.

@coolerat Sorry to hear about your Rebel, Alex or Penny would replace the board free of charge but you would obviously have to pay shipping. Totally sucks though and I feel for ya.

@Debadoo @Atchafalaya

Hope your both ok, I saw on the news about the floods, not sure how close that is to you two though.

Sorry I've not been about, mega busy and have a few things to show you.

Hopefully I'll be back on the boards soon

Hope y'all ok
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
We're fine. We've had some heavy rain, but no real flooding here. Don't think atcha has anything major either. Emailed her when the rains were heavy and she said she was fine. We're about 4 hrs from Houston.

thanks for checkin.......and hope y'all are fine as can be!
 

Sir Kadly

Tootle Wompin' Squonkaholic
ECF Veteran
Verified Member
  • Sep 18, 2015
    4,361
    50,684
    Michiana
    We're fine. We've had some heavy rain, but no real flooding here. Don't think atcha has anything major either. Emailed her when the rains were heavy and she said she was fine. We're about 4 hrs from Houston.

    thanks for checkin.......and hope y'all are fine as can be!
    She did however just tell me a bit ago that there is no gas to be found anywhere between where she works and where she lives.
     

    coolerat

    Ultra Member
    ECF Veteran
    Verified Member
    Mar 20, 2015
    2,401
    8,361
    Verona,NY
    that's frustrating. When I do flavoring orders, I try to make large ones.......hate paying as much for shipping as I'm paying for 1 or 2 bottles of flavor. Each time I've done it, wherever I'm ordering from has been outta lemon sicily. Been trying for a couple years to get some. Finally bought a 4 oz bottle of TFA lemon, hope it's good. Have some juice made up waiting to try.


    Jup, I'm mostly messin with folks when I talk constantly about Reos. They aren't for everyone I know. Some folks like more than what a mech will do, although some Reo users do vape like .1 or .2 ohms. Rob had to make a better button for those who melted the buttons lol The p-67 solves the top button issue though, it's on the side and the sides of the mod are rounded. Same shape as the 2015 woodvils. It's so much nicer in the hand!


    I build mechs at .19Ω (just how it works out not some OCD thing). I think a Reo could handle that fine. My Boxers are just fine. Its the top button I hate. A sassy RDA gets hot and the way I have to hold a Reo means I burn my finger.
     

    Rixsta

    The Millionaire Vapor' The Enabler
    ECF Veteran
    Verified Member
    Apr 8, 2015
    6,590
    39,924
    49
    Somerset, UK
    Bit of a catch up womps....

    The battered and shabby Wismec Reuleaux RX200 that I found lying in a draw at a vape shop, this used to be a white and green one and someone customized it for an Xbox event, surely the only one in existence, looks like it was acid etched.

    Before pics







    Getting the muck off



    Skip forward to the finish, removed green and white paint, general clean up and a 3 hour polish. Bought it up nice...









     
    Last edited:

    Rixsta

    The Millionaire Vapor' The Enabler
    ECF Veteran
    Verified Member
    Apr 8, 2015
    6,590
    39,924
    49
    Somerset, UK
    That RX200 cleaned up really well. What's the boreas sitting on? Is that the Think Vape ML200 something?
    Hi Eskie, yeah it cleaned up good, had to take it apart and it was a pain but turned out well.....and yes, that's the Think Vape MKL200, I just love these kind of mods with the fire button there, it has been a very good mod, hits instant and the battery life is very good too...

    No idea what the temp control is like, I'm guessing subpar, it's kind of a DNA clone without the fantastic TC lol
     
    Status
    Not open for further replies.

    Users who are viewing this thread