200$ budget on mechanical mod.... need to decide by friday !

Status
Not open for further replies.

rogergendron1

Super Member
ECF Veteran
Apr 3, 2013
666
316
43
woburn ma
I don't want a hybrid anymore Decided against it. I want the 510 connection So I can unscrew what I'm using And taste my girlfriends juice LOL

She has a few Pro tanks that I would like to be able to use because she has some good fruit juices

Also I'm still leaning heavily towards the legacy standard 18 650 with the extension tube and the crown. The crown is like the kick but also is able to go variable voltage between 3.5 and 5.5volts also between 5 and 10 Watts! !! It's an insert for tube mods like the kik but can be switched back and forth between voltage in wattage. I'm assuming that make the kick it will not let you use sub low resistance coils in Watt mode but hopefully it will allow you to use at least a1 ohm coil in variable voltage mode I just in the voltage as needed to get the desired wattage
 
Last edited:

upsetter21

Super Member
ECF Veteran
Verified Member
Apr 17, 2013
471
426
Alameda, CA
The shipping will get you but have you seen this?
MKB-TS starter kit with oddy ztomier
The battery & charger setup may throw you over the $200 budget, but not by much. If I could do it over again, I'd pick up this kit. Basically you're getting all the function of a GG for 1/3 of the cost. I already have an MKB-TS & Terminator, but purchased separately so paid a little more. Still very pleased with this setup tho. Now there is a stealth cap available too, so this becomes a very versatile MOD.
 

rogergendron1

Super Member
ECF Veteran
Apr 3, 2013
666
316
43
woburn ma
well i did it.... and some of you will be diapionted in my choice but i think its a good one.

i ordered the :
-smoktech natural 54.98$
-the 18500 exe tube 8.98$
-the AGI drip/tank with spare parts wick mesh and wire 27.98$ wow that was a deal !
-the kick by evolve 43.78$
-shipping 1.99$
tottal purchace price 137.71 !!!!!

that was a deal too good to pass up by going for the natural i saved a ton of money and got a solid ss mod (no plated copper) i have enough left over for a good set of batterys and charger 18650 18350 and 18490/18500 also i may have some cash left over to order a bottle of juice fom alice in vape land !

can someone recomend a good set of batterys that are high mah and good for this pv and where to buy them.

also is there a way to set the natural up to run 18650 with the kick ? mabey by using the 18500 tube over a 18650 setup ?

and do i have to use 18490 batterys with the kick or will 18500 and the kick work with the standard tube ? i want to get the most battery life i can with the kick it said standard tube will fit 18490 with kick bt will it fit 18500 with kick also ?

natural.jpg
agi.jpg
kick-evolv.jpg
18500 tube.jpg

this is going up to my dads machine shop this weekend and i am polishing it to a mirror finish ! i may also use a ceramic paint in the dimples and recessed parts before polishing (black) so it will have some contrast. and posably remove the spring and mod it with a solid post then sand down all the contact pionts for better conductivity... i heard they are plated too.

exhalevapors has good deals right now and a lot of stuff in stock.....
 
Last edited:

rogergendron1

Super Member
ECF Veteran
Apr 3, 2013
666
316
43
woburn ma
ok just ordered batterys and charger and i think i have all my basses covered

i got :

ultra fire protected lithium ion 18650 3000mah button top 9.99
ultra fire protected lithium ion 18500 1600 mah button top 7.49
ultra fire protected lithium ion 18350 1200 mah button top 4.97
trustfire tr-001 charger 9.99
shipping 2 day fed x 8.00
tottal for batterys 40.26

grand tottal 177.97

also i already own a trust fire 18650 2600mah protected lithium ion

enough left over from my 200$ budget to buy a big jug of zombie apocolips or morning breeze or possably ecto cooler


still want to know if i can run an 18500 with kick or does it have to be a 18490 ?
and is there a tube combo that will allow me to use a 18650 with kick ?
any way i can run the 18350 i bought with the kick in the spare tube setup so i have that covered i just want to know all posable battery combos

like can i stack 2 18350's ? exe.....

Also I want input. I need recommendations on the best batteries I can get for mechanical mods.
 
Last edited:

donnah

Vaping Master
ECF Veteran
Verified Member
Aug 22, 2010
4,470
4,463
Albemarle, North Carolina
The natural is a good choice. But I would have gone with different batts. I use CGR18650CH and AW IMR unprotected batts in my mechs. With the protected batts you ordered... you may have trouble with the protection kicking in and shutting off the power. Then you'll have to take them out and put them back in to reset them.

Here is where I got the CGR18650CH batts
Here and here is where I get my aw imr batts
 
Last edited:

Low Budget

Senior Member
ECF Veteran
Verified Member
Mar 28, 2013
191
102
Grand Rapids, MI

Red_Bird

Moved On
Apr 11, 2013
1,237
1,095
Montgomery County, NY
Segelei #8 if you're willing to take the chrome off the 510 connection top, the firing pin and put a bigger spring in it.

If you want an out of the box experience maybe a Precise.

I have a friend with many mech mods, he insists a Segelei #8 modded as described above hits harder (less voltage drop) then the Natural.

Venerable Vaping had them for $28.99 yesterday but I think they sold out.

(6) left:

http://www.venerablevaping.com/product/sigeleicat1500218_1933075aspx
 
Last edited:

xbassman

Super Member
ECF Veteran
Verified Member
Apr 1, 2012
627
342
63
Tulsa, OK. USA
I agree with the above posters about your battery and charger choices.
I would cancel your order if it's not too late.

Here's a review of the Ultrafire 18650's and it seems to be right on with info seen in this forum.

Test of UltraFire BRC18650 3000mAh (Red-silver)

I have a Trustfire TR-001, but it is just for back-up purposes now.
The Xtar WP2-II I have is a much better charger. The I4 recommended above would be a good choice as well.
 

donnah

Vaping Master
ECF Veteran
Verified Member
Aug 22, 2010
4,470
4,463
Albemarle, North Carolina
I agree with the above posters about your battery and charger choices.
I would cancel your order if it's not too late.

Here's a review of the Ultrafire 18650's and it seems to be right on with info seen in this forum.

Test of UltraFire BRC18650 3000mAh (Red-silver)

I have a Trustfire TR-001, but it is just for back-up purposes now.
The Xtar WP2-II I have is a much better charger. The I4 recommended above would be a good choice as well.

I also have the Xtar WP2-II and it's nice. I got mine off ebay for around $20 shipped. I too vote for canceling that batt order if you can. You don't want to use ultrafires or trustfires in a mech.
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,476
Brampton, Canada
www.facebook.com
The natural is a good choice. But I would have gone with different batts. I use CGR18650CH and AW IMR unprotected batts in my mechs. With the protected batts you ordered... you may have trouble with the protection kicking in and shutting off the power. Then you'll have to take them out and put them back in to reset them.

Here is where I got the CGR18650CH batts
Here and here is where I get my aw imr batts

Donnah said it well. These below r my only batteries :

Panasonic CGR18650CH.jpg Panasonic NCR18650 battery.jpg

And they fit snug, plus perform best on my Mech.Mods. I also fetch them from Fasttech.
 
Status
Not open for further replies.

Users who are viewing this thread