75W Vaporesso TARGET 2 VTC Kit with Ceramic cCELL Coil

[zipflint]

The mailman surprised me and brought my vapemail EARLY for once!

I just finished cleaning and filling the brandy new iJust2 tank (no machine oil odor but I always clean my gear in hot tap water before using, except for heads/coils of course) with Deadly Sin from GoodLife Vapor (the 50/50 version, which is still pretty thick) and priming the cCell very thoroughly. Now it's just sitting there. I'm giving it the best possible shot, heh.

I'm taking photos of things that might be interesting/useful and will post all that once I decide if this is a WIN or a FAIL.

I noticed that it was a bit more difficult to screw the base+cCell head on to the tank; it's a smoother process when using the regular Eleaf head. But I didn't jump any threads and was able to remove all the parts easily in a "dry run" I did prior to washing and filling. Nothing is leaking, I had some bubbles float up when I turned the tank right side up, so I'm guessing everything is fine. We'll see....

 

[clabern]

Urk! Please do report back with your findings! I will be using this exact setup; I'll have it tomorrow, actually....

I took the coil out and all looked good so I just kinda rotated it a bit and put it back on and I'm happy to say I'm back to a wonderful vape!

Sent from my P01MA using Tapatalk

 

[clabern]

The mailman surprised me and brought my vapemail EARLY for once!

I just finished cleaning and filling the brandy new iJust2 tank (no machine oil odor but I always clean my gear in hot tap water before using, except for heads/coils of course) with Deadly Sin from GoodLife Vapor (the 50/50 version, which is still pretty thick) and priming the cCell very thoroughly. Now it's just sitting there. I'm giving it the best possible shot, heh.

I'm taking photos of things that might be interesting/useful and will post all that once I decide if this is a WIN or a FAIL.

I noticed that it was a bit more difficult to screw the base+cCell head on to the tank; it's a smoother process when using the regular Eleaf head. But I didn't jump any threads and was able to remove all the parts easily in a "dry run" I did prior to washing and filling. Nothing is leaking, I had some bubbles float up when I turned the tank right side up, so I'm guessing everything is fine. We'll see....

It is a bit tight with the cCell, but I haven't had any issues with threads or leaks and whatnot so far with my iJust 2.

Sent from my P01MA using Tapatalk

 

[zipflint]

Happy to report no issues with the cCell and iJust 2 tank combo here either! I've got the .9 Ohm kanthal head at 30 watts (5.31 volts) on my rx200 Reuleaux. I'm really impressed with the flavor! I'm not a whiz-bang coiler but I think of myself as being "proficient."

This head is producing about the same excellent flavor as any tank that I've rebuilt correctly. I mean that as high praise. Haven't thrown any particularly VG heavy stuff at it yet, but I will tomorrow. I'll be posting photos as soon as I can get back into my old Flickr account, derp!

 

[DavidAmonettNashville]

Word is that the Ceramic takeover has just begun. Tungsten sandwiched between medical grade ceramic seems to have gotten the green light and China's not wasting any time. Perhaps the whole testing fiasco was a blessing in disguise for Cheramics....

 

[zipflint]

Alright, here's the photos I took comparing/showing off the cCell head with the eLeaf heads for the iJust 2 tank. If anyone has any questions I'll be happy to try to answer them.

cCell head in iJust2 tank 001 by Jason Leaphart, on Flickr

cCell head in iJust2 tank 002 by Jason Leaphart, on Flickr

cCell head in iJust2 tank 003 by Jason Leaphart, on Flickr

cCell head in iJust2 tank 005 by Jason Leaphart, on Flickr

cCell head in iJust2 tank 004 by Jason Leaphart, on Flickr

 

[Ding]

awesome zipflint.

Wasn't impressed with my new batch of Ccells that just arrived.Mind ya,only used the first one outa the card but it just didn't have the pazzow as the original Ccell outa the kit.

Maybe it was a dud but am getting juice taste through the mouth piece.Yeah I tightened it down,checked the O rings and all.Got a lotta vapor but the flavor isn't as gratifying as the first one.Bouncin 30-33 watts.Just pushed to 35 watts,warmer vape but the flavor is mute.

 

[100%VG]

Wasn't impressed with my new batch of Ccells that just arrived.Mind ya,only used the first one outa the card but it just didn't have the pazzow as the original Ccell outa the kit.

Maybe it was a dud but am getting juice taste through the mouth piece.Yeah I tightened it down,checked the O rings and all.Got a lotta vapor but the flavor isn't as gratifying as the first one.Bouncin 30-33 watts.Just pushed to 35 watts,warmer vape but the flavor is mute.

This seems to happen all too often. I don't think the cCells are in full production yet, so you might be getting Samples still. Heaven Gifts still doesn't have any of the Vaporesso Devices in stock yet, and I think the holdup is that they are waiting for Full Production models. All they have now are the cCells in Ni200 and Kanthal. Everything else is Partially Pre-Order or Coming Soon.
.

 

[Ding]

Got a box from vapeNW and heaven gifts.used another coil,seemed to be better than the last one although didn't let it prime enough lol.burn baby burn but it evened out after I dry drew it a few times .

 

[VapingTurtle]

... I don't think the cCells are in full production yet, so you might be getting Samples still. ...

A hellofalotta retailers are currently selling a hellofalotta the coil heads, so Vaporesso must have made a hellofalotta samples.

Mine are scheduled to arrive tomorrow from VaporBeast.
If they are good, I'll thank you, VG.
If they are not good, I'm comin' after ya, VG.

 

[VapingTurtle]

The Target 2 mod only (no kit) is available at VapeNW for $33.

 

[100%VG]

A hellofalotta retailers are currently selling a hellofalotta the coil heads, so Vaporesso must have made a hellofalotta samples.

Mine are scheduled to arrive tomorrow from VaporBeast.
If they are good, I'll thank you, VG.
If they are not good, I'm comin' after ya, VG.

Like it would be my fault. . Please remember that what I was sent had issues. All through this thread there have been mixed results. I do hope you are among those who are pleased and the cCells last as long as they should. Good Luck! I'll be happy to hear about your experience and whatever you post, but come after Vaporesso if you aren't pleased.

Taking into consideration how many Sample Tanks and Kits have been given away, and how many vendors are selling them now, it would appear that Vaporesso made a metric chit ton of them. But I have no way of knowing how many of what were made, nor whether or not what vendors are selling are clones or not. Look at the Altus CVU. The SX Pure Tank will be out soon, and looks to be a direct (and very inferior) clone of the CVU.

Again, Good Luck!!!
.

 

[Ding]

look at it this way,we have samples.not production models.we is special..

 

[100%VG]

look at it this way,we have samples.not production models.we is special..

 

[cCELL]

Hello,

Where does this notion originate? The notion that all Target 75 VTC on the market, available to brick and mortar stores and what must be a dozen or so websites, are all pre-production samples.
As alluded to by another user, Vaporesso or the parent company, must have literally made 100's upon 100's of these things (1000's?). Just the sheer volume of units out in the wild offer a seemingly significant indication that this notion is nothing more than a figment.
Just curious to know the truth.

Satisfied, yet new target owner and operator,
cCell

EDIT: oh, since I've seen some minor discussion about this a dozen or few pages back, yes, I've read the entire thread.

 

[clabern]

My understanding is that the "sample" or "pre-production" models are the one's you see in a lot of review videos and from early adopters that came in large square boxes. These are the one's where the white variant had the orange buttons/accents. You can see an example of this larger box and orange buttons here:

The "production" models changed up the packaging as well as the accent on the white model (it's now black). The packaging is much smaller and looks a bit different. The two units I received (one from eightvape.com and one from 3avape.com) were both identical and in this new packaging seen here:

I'm interested to see why one would think these are all "samples" or "pre-production" models? I specifically ordered from eightvape.com because it's listed as an "Authorized" vendor on Vaporesso's website. I also have a set of cCell coils I ordered from VanguardSmoke that have been excellent (I've us ed 3 of the 5)!

 

[stylemessiah]

look at it this way,we have samples.not production models.we is special..

Some might say guinea pigs, but feel free to pick something less alarming

 

[Roadtrip635]

I'm not sure if anyone has posted this, but it looks like Vaporesso will be releasing a new sub-omh tank and will be offering Ccell coils with SS. It is called the Gemini Tank, they're also making an RTA that looks nearly identical to the Griffin.
The new tank looks to have a big increase in airflow, including top airflow, top fill, and the new SS Ccell will have an increase in capable wattage. I just saw this today, have no clue on a release date though.

Gemini Tank

 

[zipflint]

Thanks for posting this! I'm intrigued for sure. I'm a little confused though; is that two separate products? Or is the Gemini RTA and optional part FOR the Gemini tank? Maybe I'm just being dense....

 

[Roadtrip635]

Thanks for posting this! I'm intrigued for sure. I'm a little confused though; is that two separate products? Or is the Gemini RTA and optional part FOR the Gemini tank? Maybe I'm just being dense....

It's two separate tanks, but they look nearly identical. Unfortunately, that infographic is all they have posted on their site right now. I would be absolutely thrilled if that Ccell tank had an optional RBA section like that of their new RTA tank.

I like the "Ccell inside" logo knockoff of the "Intel Inside" logo....lol