75W Vaporesso TARGET 2 VTC Kit with Ceramic cCELL Coil

[tiburonfirst]

again, I was not asked to leave.

not that it would have made a bit of difference if you were

 

[Skoad]

I am debating getting one of these for a desk mod. A friend of mine grabbed one a few days ago and is already having issues with it though. It may be a rare issue as I dont really see it mentioned here... but when his battery starts to get low, the screen glitches out and the only way for him to fix it is to remove the battery/charger.. recharge.. and then it eventually starts working again. He is able to vape with it during this time, but screen is glitched.

 

[retired1]

There's this wonderful little tool called ignore which is accessible from a user's profile. If you can't play nicely, use it please.

 

[100%VG]

I am debating getting one of these for a desk mod. A friend of mine grabbed one a few days ago and is already having issues with it though. It may be a rare issue as I dont really see it mentioned here... but when his battery starts to get low, the screen glitches out and the only way for him to fix it is to remove the battery/charger.. recharge.. and then it eventually starts working again. He is able to vape with it during this time, but screen is glitched.

Hey Skoad,

Things like this are bound to happen in small percentages. Please have your friend contact the vendor about a replacement.

Additional thought:
Maybe your friend is using old batteries or maybe they are not a good match for the requirements of the Mod. Do you have some high quality, high Amp IMRs that can deliver a continuous 20 Amps? If you do, please let your friend try one long enough to see if that resolves the issue.
.

 

[Kaezziel]

My Target VTC Kit came in on Thursday and I picked it up this morning... That's what I get for having it sent to my work address!

Anyway, first impressions are pretty awesome and I'm putting a review together that I'll post up in the next day or two. The one that I received is a 'Sample' model, White with Orange buttons. I've gone through about a tank and a half so far, and the flavor is quite good. I might even go so far to say that it is a bit better than rayon! I'm currently using the kanthal coil that was already installed, started out at 15W and have since bumped up to 40W. That is the sweet spot for me with this atty and coil. A moderately warm and very flavorful vape!

So, as a tease before I get the full review together, I'll put this up:

 

[Skoad]

Hey Skoad,

Things like this are bound to happen in small percentages. Please have your friend contact the vendor about a replacement.

Additional thought:
Maybe your friend is using old batteries or maybe they are not a good match for the requirements of the Mod. Do you have some high quality, high Amp IMRs that can deliver a continuous 20 Amps? If you do, please let your friend try one long enough to see if that resolves the issue.
.

Thanks. Ill check with him. I know he was using the battery that the shop gave him with it. I got some on hand ill see if he wants to test. I know he was going to exchange it for another, so it may be too late to test, but ill contact him to find out. Thanks again.

 

[Kodak]

I have one of the white ones with orange buttons. It's a sample model and I do know they have changed the buttons for the full production model. The white with orange buttons is actually pretty cool looking in real life, but black buttons will look great on it.

I received one of the black ones Thursday...You are right, those coils are outstanding! I love being able to flip flavors without going through a whole lot of hoopla! Haven't tried the temp control yet, but I'm loving it so far. Now to just get my hands on the purple one.....

 

[zipflint]

Sooo....anyone know of a US-based vendor that has these (or just the tanks and heads) in stock, or will have them soon?

I've done some searching and keep getting pointed to the slow boat from China.....

 

[100%VG]

Sooo....anyone know of a US-based vendor that has these (or just the tanks and heads) in stock, or will have them soon?

I've done some searching and keep getting pointed to the slow boat from China.....

Vanguard ships from their headquarters in the United States, located at:
5 E Gabilan St., Ste. 207
Salinas, CA 93901
United States
.

 

[zipflint]

Ah. Thank you! I thought (for whatever reason) that was a China-based vendor. Shoulda looked more closely.

 

[100%VG]

Ah. Thank you! I thought (for whatever reason) that was a China-based vendor. Shoulda looked more closely.

I think they are, but they have a headquarters here in the USA.

Glad I could help!
.

 

[zipflint]

One more question, this time about compatibility with the Ccell heads. Does anyone know for sure if they will work in an old Nautilus? From what I gather across several sites, they appear to play nice with lots of the Aspire tanks, but I haven't found a specific reference to the Nautilus.

 

[100%VG]

One more question, this time about compatibility with the Ccell heads. Does anyone know for sure if they will work in an old Nautilus? From what I gather across several sites, they appear to play nice with lots of the Aspire tanks, but I haven't found a specific reference to the Nautilus.

Hey,

The cCell will work in the Atlantis, the Herakles, the Melo 2 & iJust 2, the AnyVape Fury Tank, and anything that can use that kind of Head. I don't think they will work in the Nautilus, but if you have Heads for any one of the first, then try one of those Heads in your Nautilus.

Sorry I can't be of more help.
.

 

[zipflint]

Don't have any of those tanks! All I've got are a few Kanger subtanks, and a small pile of various and sundry RTAs and drippers. Thanks for all the help, I appreciate it very much!

 

[100%VG]

Don't have any of those tanks! All I've got are a few Kanger subtanks, and a small pile of various and sundry RTAs and drippers. Thanks for all the help, I appreciate it very much!

I don't have a Nautilus, but I think this will show that they probably will not work in a Nautilus . . .

Nautilus Head

Atlantis Head

cCell

The sizes are probably not proportional, but this is to show the head casing, plus pin, and threading. The Nautilus Heads are different. The threading on top is below a chimney, they appear to be a good bit taller, and maybe a smaller diameter. I don't know the base threading diameter of either one. The cCell might work. If you know someone with an Atlantis, Herakles, or AnyVape Fury Tank, ask them if you can try a Head to see if it will fit and work in your Nautilus. If not, try a vape shop if one is nearby.

But the Nautilus may not have the Air Flow needed for a good vape. I hope you can try one to see for yourself.
.

 

[zipflint]

Hey, GREAT breakdown of those heads! Nah, now that I see all that, I'm pretty sure the Ccell heads won't work in a Nautilus. No big deal. Woulda been nice to get some more mileage out of some old gear.

 

[MsFonty]

I found a pic of the purple one on the gram. It's boooootiful. I told yall that I stalk this thing.

 

[Junglegeorge]

One more question, this time about compatibility with the Ccell heads. Does anyone know for sure if they will work in an old Nautilus? From what I gather across several sites, they appear to play nice with lots of the Aspire tanks, but I haven't found a specific reference to the Nautilus.

I had a couple of old Nautilus heads laying around (no tank though).
They are much smaller diameter on them so I can't see the cCell coils fit in a Nautilus or vice versa.

 

[MsFonty]

That pic made me pull the trigger. I ordered it from a site I have never used before. Hopefully it will be a good transaction and good product.

Next.... CUBIS *insert evil laugh*

 

[Kaezziel]

Wow! I just found that they have black/white/silver Target kits at FastTech... replacement cCells are HARD to find though!