AFS V2 and cartomizers perfected

Status
Not open for further replies.

Rippspeed

Super Member
ECF Veteran
Jun 18, 2010
842
144
Inland Empire
Man i really want to try thoses VHV carto's Lisa has along with the LR ones as well! Please Lisa advise Rob on how to go about stocking these if you can.... I would hate to have to order from out of state. Nothing against it just takes a while~
:vapor:

I agree ... nothing against you Lisa, and I know you run a great shop. But, I'll wait for VaporKings to stock them. With the economy the way it is over here, I'll support the shops state side.
But, I'll be ordering from you when I move back to Philippines... You do service the Philippines right???
 

jonah

Senior Member
ECF Veteran
Mar 13, 2010
170
105
67
leeds uk
i am useing one of the VHV carts from lisa.vaping at six volts its working great had it for just 2 days and no drop in performance.and i am chain vaping.

AS for drilling the holes dont bother just give it a tap with a center punch.DONT tap to hard or you will warp the threads.

I am useing the SB with the AFS v2 STILL WAITING WITH BAITED BREATH FOR THE NEW GG AND AFS

Lisa save me one shhhhhhhh but dont tell any one.
 

Lisaf01

Unregistered Supplier
ECF Veteran
Jun 22, 2009
4,515
394
UK
www.cremedevape.com
i am useing one of the VHV carts from lisa.vaping at six volts its working great had it for just 2 days and no drop in performance.and i am chain vaping.

AS for drilling the holes dont bother just give it a tap with a center punch.DONT tap to hard or you will warp the threads.
Glad you are loving the VHV carts - I think they are definitely best at 6V.
Nice tip about the method for creating the hole - I'll try that.

I am useing the SB with the AFS v2 STILL WAITING WITH BAITED BREATH FOR THE NEW GG AND AFS

Lisa save me one shhhhhhhh but dont tell any one.

:p:p:p
 

Lisaf01

Unregistered Supplier
ECF Veteran
Jun 22, 2009
4,515
394
UK
www.cremedevape.com
Emonty,

My VHV cartomisers produce exactly the same watt output at 7.4V as your favourite cartomisers produce at 6V.

I think they taste burnt but you like them, proving that every vaper is different.

I do not recommend them specifically at 7.4V, just as I don't recommend using 3.2 ohm cartomisers at 6V, but they are capable of it and some people will like it, some won't.
 
Last edited:

emonty

Flavor Junky
ECF Veteran
Verified Member
Oct 15, 2009
7,612
8,850
the Netherlands
Emonty,

My VHV cartomisers produce exactly the same watt output at 7.4V as your favourite cartomisers produce at 6V.

I think they taste burnt but you like them, proving that every vaper is different.

I do not recommend them specifically at 7.4V, just as I don't recommend using 3.2 ohm cartomisers at 6V, but they are capable of it and some people will like it, some won't.

no burning my dear!!!! Perfect taste, Vapor, the works.

The test: take the used carto apart, rinse the filler and the wick...mine are wthout black spots and that after 3 days vaping, that is how much I use them. It is not only the amount of days but also the amount of liquid. I vape around 12 ML a day, so they are done at about 36 ml of juice passing through. Also the amount of filler, the length of the coil has to be taken into account concerning the performance. It is not just the Watt. Some brands of atties work better then others, same with carto's..... and don't forget: what type of liquid you are burning. A lot of people only focus on Watts and mods, but juice is an art, like cooking ;-)
 
Last edited:

Lisaf01

Unregistered Supplier
ECF Veteran
Jun 22, 2009
4,515
394
UK
www.cremedevape.com
no burning my dear!!!! Perfect taste, Vapor, the works.
That's what I was saying Emonty - you answered a question stating that my VHV cartomisers weren't up to 7.4V - I was telling you that I don't like them at 7.4V, BUT they produce EXACTLY the same watt output as your fave cartos produce on 6V - therefore, they are capable and what's more, you may like them. :)
 

mwa102464

Resting In Peace
ECF Veteran
Oct 14, 2009
14,447
12,564
Outside of the Philadelphia Burbs, NJ & Fla
But Lisa you say yours taste burnt @ 7.4 in your post ! where Emonty says he has no burnt taste, so are your HV carts exactly the same.? This makes me wonder if they are, I would like to try these from you and have been waiting for some reviews on them at HV. I wished some more people would post reviews on Lisa's cartos at 6V & 7.4 and ley us know what you think of them
 

Lisaf01

Unregistered Supplier
ECF Veteran
Jun 22, 2009
4,515
394
UK
www.cremedevape.com
MWA,
The situation is this.
Emonty uses 3.2 ohm cartomisers (not my cartomisers) at 6V - with freshly charged batts this is a watt output of 12.80 - which in my opinion is too high and can cause burning on cartos. He says it's perfect for him.
My VHV cartomisers when used at 7.4V also produce 12.80 watt output with 2 x freshly charged batts. For me, it does not taste good - but I was stating for Emonty's taste, it might suit him.
On my site I recommend they are used at 6V for a cooler vape, but when Emonty stated they should not be used at 7.4V at all, I had to point out that effectively - in watts, it's the same as the vape he currently enjoys most.
 
Last edited:

Lisaf01

Unregistered Supplier
ECF Veteran
Jun 22, 2009
4,515
394
UK
www.cremedevape.com
Is Rob going to be carrying these? I would hope a US supplier will have these available becouse i would like to try VHV at 7.4v....
I don't know, it would be best to ask Rob - maybe on his forum?
It has come to my attention that people think Rob's and my companies are in some way affiliated and run together somehow - this is not the case, we are two completely separate companies and just happen to both be lucky enough to distribute the GG range of products. :)

We do talk frequently but I have no idea what his plans are RE: high voltage cartomisers.
 

emonty

Flavor Junky
ECF Veteran
Verified Member
Oct 15, 2009
7,612
8,850
the Netherlands
MWA,
The situation is this.
Emonty uses 3.2 ohm cartomisers (not my cartomisers) at 6V - with freshly charged batts this is a watt output of 12.80 - which in my opinion is too high and can cause burning on cartos. He says it's perfect for him.
My VHV cartomisers when used at 7.4V also produce 12.80 watt output with 2 x freshly charged batts. For me, it does not taste good - but I was stating for Emonty's taste, it might suit him.
On my site I recommend they are used at 6V for a cooler vape, but when Emonty stated they should not be used at 7.4V at all, I had to point out that effectively - in watts, it's the same as the vape he currently enjoys most.

Lisa,

there is more to flavor then Watts. The coil, carto filler, the wick, batteries, duration of inhale and most important: the juice. E-juice is like gourmet cooking, the exact ratio's will give the best results, if not then you can burn the juice or get a soapy flavor, but that is if you don't know what you are doing :D and then it will have a burned taste yes!
I will order some to try, but I just got a very large order somewhere else which is going to last for a few months. I think by that time a newer breed of carto's will appear on the horizon ;-)
Until then: somebody please try them and let us all know how they perform as I did not hear anything about them yet. I had my fair share of trying atties and carto's.....
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread