Ana Box Mod Dna30

[The Rebel]

Nice job MrWire cant wait to hear about the Ehpro Clone Kayfun Lite Plus V2

thanks

This is the same one I showed in my picture. It has the adjustable airflow screw in the bottom. Works great. I've had for close to a month and it works like a champ. No leaks, easy to work with, comes with extra o-rings and a nifty two way screw driver for the air adjustment and fill hole. I paid a little over $40 at my local B&M so the one you linked is a pretty good deal.

 

[MrWire]

Im going to have to order a kayfun. When I stoped by the shoo around here (NH) they had no ehpro left. Only hcigar kayfuns and a fogger. Both were 70 dollars...
I am all about supporting start ups but thats wayyy to much for me.

That EHPro looks sick in black.

I just saw on ebay there is a v3 now? In rosegold, gold black and stainless.. 47 for rba and nano kit or 36 for regular.
Is there much difference between yours and the v3?

Link..Newest Ehpro Kayfun Lite Plus V3 "Dual Air Hole" Version | eBay

 

[The Rebel]

Im going to have to order a kayfun. When I stoped by the shoo around here (NH) they had no ehpro left. Only hcigar kayfuns and a fogger. Both were 70 dollars...
I am all about supporting start ups but thats wayyy to much for me.

That EHPro looks sick in black.

I just saw on ebay there is a v3 now? In rosegold, gold black and stainless.. 47 for rba and nano kit or 36 for regular.
Is there much difference between yours and the v3?

Link..Newest Ehpro Kayfun Lite Plus V3 "Dual Air Hole" Version | eBay

From what I can see it would be the dual air adjustments on the bottom and the addition of another air hole on the side. Plus the fancy beauty ring which wouldn't work on our mods anyway. Not sure what difference the extra air hole and adjustment makes. I get plenty of air adjustment out of the one on mine. Can tighten it up or let it breath like a Protank or Nautilus. I've never used one with duals like this so I can't comment. But I am very happy with the V2 and the single air adjustment. I won't be changing anytime soon.

 

[jbarrick]

Dovpo E Mech Mod V3 sale 69.99 -20% off = $56.01 free shipping (It's a pulse modulation mod though.)
Aquavaporcigs.com has 20% coupon until the 17th "save20" it will bring the price down.

I also was looking at it, read the manual and was not impressed.

Just pulled the trigger

$66.28 free shipping and 2 18650 battery's

 

[mightymen]

Just pulled the trigger

$66.28 free shipping and 2 18650 battery's

I've used that vendor many times very good service, I always get my order in 2 or 3 days.

I'm pretty sure that's version 2, differently an all day vape, enjoy.

I've watch some reviews, but I'm more interested in your opinion then theirs.

 

[MrWire]

I got an email back from ana box vendor. Says all power wires are 20 awg and button and usb wires are 28awg.
Also ffinding out warranty details. I.e seller replaces/fixes or send back to manufacturer who seams to be a company called smocare in china.

 

[mightymen]

Ordered Thur 1:30 PM they shipped it out Friday and USPS tracking say's I'll be getting it tomorrow.

 

[MrWire]

The vendor is fast! I givem that much.
24 hours with device is going well I have to say.
The only quirk that still makes me weary is the voltage change on screen when firing.

Charging seams to work fine so far thru usb but its charging faster then my nitcore i2 which seams a bit fishy. Other then that solid unit so far at great price.

Would love to hear about your unit when you get it to compace QC.

 

[mightymen]

Got the mod an hour ago defective on delivery, had a few drops of liquid in the 510 connector, I taught maybe they tested the unit before sending it out until I tried it out and found out it was broke.

Won't adjust down stuck on 30 watts all the time, everything else seems to work.

BUMMER.

 

[MrWire]

Thats sucks man! Sorry to hear that.
Does the unit look beat up at all, inside or out?
What color did you order?

 

[mightymen]

Thats sucks man! Sorry to hear that.
Does the unit look beat up at all, inside or out?
What color did you order?

Clean as a whistle inside and outside - - black.

 

[boathook]

Got my Ana Box today. Found this thread after I ordered, and got a little nervous. I didn't realize they were that new on the scene with this thing!

LED for charging shows RED when plugged in, faintly. I can see basically a red dot on either side of the USB port.

I haven't noticed a shifting voltage reading or any sort of power to my coil when not firing. I'll keep an eye on it (or an ear, rather) and update if that changes.

See attached pic for red charging LED. (Not sure if it goes out or changes colors when battery is charged or not, as it's currently charging)


Overall, thus far I'm happy. Everything seems to function as it should. I plan to solely use this device for a good week straight, and if my perspective changes, I'll be sure to post back.

 

[The Rebel]

Red light should go out once it's fully charged. But it can take a while through the USB. I use to plug it in at night and it would be charged in the morning. But I pulled the trigger and bought two new Sony VCT5s and a charger so now it's just doing the battery rotation game for me.

 

[boathook]

Red light should go out once it's fully charged. But it can take a while through the USB. I use to plug it in at night and it would be charged in the morning. But I pulled the trigger and bought two new Sony VCT5s and a charger so now it's just doing the battery rotation game for me.

I haven't been able to leave it plugged in long enough for the light to go out. I may have to try tonight.

Back to MrWire's post:

The 4.1 to 4.6 v jump wen firing is making me a bit nervous. It should just fire the first time at 4.6v and everytime. Not jump or ramp up power.
If anyone has seen or experienced something similar id luv to kno. Not sure if its the unit or my vct5s.

I do see the voltage increase on mine when the battery is anything other than fully charged. I have a 1.4 Ohm atomizer and I have it set at 18.5 Watts. When I hit the button the voltage display immediately says 4.3V then changes about a quarter of a second later (guesstimate) to 4.7V. I'm not so concerned that it's ramping up voltage as I am that the output on that is only hitting 15.779 watts instead of closer to 18.5.

Another issue I find is that if my battery is discharged to around 3.7V it looks like it won't regulate up and just passes 3.7V no matter what the wattage setting is. That gives me a bit of sadness.

At any rate, all of my 18650's are rather old, so I'm going to pull the trigger on some Sonys once I gather up a little extra funds. Maybe that'll make a difference. If not, then I guess I'll just have to keep them well-charged!

 

[mightymen]

Just place an order. This will replace a Segelei-30 I had to send back and got my money back.

Was going to get DNA 30 from fastech but now there saying 45-60 for delivery.

Was browsing the web for two days and for this price I didn't see any Warranty being offered, yea you can get a Warranty for $30+ MORE, that's BULL.

This is what clinch the deal for me and much neater on the inside also...
Warranty: WE OFFER A 90 DAY WARRANTY AGAINST MANUFACTURER'S DEFECTS ONLY IF PURCHASED THROUGH ALIVAPOR, THE ONLY US DISTRIBUTOR OF ANA BOX CURRENTLY. WARRANTY WILL BE VOID IF YOU EXCEED THE OPERATING DISCHARGE TEMPERATURE (-10 - 60 Degree Celsius). TAMPERING WITH THE ELECTRONICS AND/OR USING A NON-RECOMMENDED BATTERY WILL ALSO VOID YOUR WARRANTY. USE AT YOUR OWN RISK.

Just to let everyone know the vendor does honor their WARRANTY.

I had to return the unit broke on delivery anyway I mailed it Monday vendor received it Tuesday and gave me a refund already as I requested.

Ordered DNA 30 from fasttech today their WARRANTY is outstanding.

 

[StevenServo]

just got the ana in the only thing i notice so far is when the fire button is pressed it will initially read the voltage off and correct its self. Im not so sure that its normal maybe do to wiring?. it hits decent though keeps up with the ipv2 at same watts (production wise) my cana is decommissioned atm or i would check to see if it has the same issue initially reading voltage off then correcting itself.does anyone have any info on that???

 

[MrWire]

just got the ana in the only thing i notice so far is when the fire button is pressed it will initially read the voltage off and correct its self. Im not so sure that its normal maybe do to wiring?. it hits decent though keeps up with the ipv2 at same watts (production wise) my cana is decommissioned atm or i would check to see if it has the same issue initially reading voltage off then correcting itself.does anyone have any info on that???

My original post brought up this issue.
No info has been found. Somone had chimed in saying that its somewhat normal and doesnt sound like a problem. Im waiting for a new multimeter and ohm reader to check this myself.

Aftrr a week w the device I have to say its flawless( well my unit) is holding up perfect next to my new ipv2. The only thing that I am still positive I do NOT like is that there is nk way to tell when battery is fully charged. ghe led for charging is inside the box and not visable from the outside at all.

If you are cool w that and use a seperate charger this shouldnt be a problem. Other then that pretty solid.

 

[StevenServo]

My original post brought up this issue.
No info has been found. Somone had chimed in saying that its somewhat normal and doesnt sound like a problem. Im waiting for a new multimeter and ohm reader to check this myself.

Aftrr a week w the device I have to say its flawless( well my unit) is holding up perfect next to my new ipv2. The only thing that I am still positive I do NOT like is that there is nk way to tell when battery is fully charged. ghe led for charging is inside the box and not visable from the outside at all.

If you are cool w that and use a seperate charger this shouldnt be a problem. Other then that pretty solid.

i like it too. there is a small bubble right under the screen of mine there the metal is slightly pressed out. i dont mind though. Also thanks for the info on this glad to know im not the only one effected by this that makes me feel better haha..

 

[The Rebel]

The only thing that I am still positive I do NOT like is that there is nk way to tell when battery is fully charged. ghe led for charging is inside the box and not visable from the outside at all.

If you are cool w that and use a seperate charger this shouldnt be a problem. Other then that pretty solid.

Check it in the dark. I know on my Cloupor I can't see it when it's light out, but at night I can see the red glow around the usb port when I have it plugged in.

 

[boathook]

Check it in the dark. I know on my Cloupor I can't see it when it's light out, but at night I can see the red glow around the usb port when I have it plugged in.

Mine does this as well.

The only thing that I am still positive I do NOT like is that there is nk way to tell when battery is fully charged. ghe led for charging is inside the box and not visable from the outside at all.

Yours doesn't glow around the USB plug as shown in my picture?

View attachment 366029

And to confirm, on mine the LED does shut off after the battery is fully charged.