Ares, new MTL RTA designed by Phil Busardo and Dimitirs Agrafiotis

[Zombo]

If its a winner let's push the team for a 22mm with 1 smaller hole... to the Bastille!

The impression I got from the video was that they probably will at some point, I guess.

I'm interested mostly due to the filling (hopefully, it won't leak or seep through the cap).

The tabs to rest your wick legs on is a great idea, but personally, I never had a problem with my Siren seeping....after I wet the wick I, I prod a mini screwdriver where the cotton may come in contact with the air-hole to make sure there is some space. It's worked for me, but YMMV.

I'm glad Phil is finally wicking it correctly lol. His Siren V1 video made me cringe with all the cotton he stuck in there (then complained about excessive cotton taste hah). I've been saying since the V1 that you only need to have the legs hang down about half-way or just barely touching the bottom...you naturally tilt it when vaping and it stays drenched. Also, surface tension tends to make the juice stick to the wick legs even when juice is low (even though I vape high PG...in other words, not just for the thicker juices).

And, I was just about to order a couple of V2s this weekend, now I don't know if I should wait for Phil to make a 22mm.

 

[capthook]

dbl post

 

[capthook]

So we know it's a 24mm tank.
What are the other stats - height and weight?
(The Innokin site doesn't even give 24mm width )

From this pic:

I might guess the tank is about 54mm tall and the drip tip is 18mm.
And it looks moderately heavy, like maybe 58g as a wild guess.
Not heavy like a Kayfun, but not light like an Erlkonigin.

Why aren't these listed/given anywhere? DOh!

 

[Trigster]

So we know it's a 24mm tank.
What are the other stats - height and weight?
(The Innokin site doesn't even give 24mm width )

From this pic:
View attachment 701273

I might guess the tank is about 54mm tall and the drip tip is 18mm.
And it looks moderately heavy, like maybe 58g as a wild guess.
Not heavy like a Kayfun, but not light like an Erlkonigin.

Why aren't this listed/given anywhere? DOh!

I saw a Pre-Order listing at a Less Than Reputable vendor who shall remain linkless and nameless...They were describing it at 4ml ???...But the source is dubious at best...Trig

 

[capthook]

Yea, it's 4ml and/or 2ml.
How the 2ml version is offered is still a mystery though.

 

[Bigbob2322]

Who is going to sell this tank on black Friday, are other vendors other than Innokin selling them?

 

[BulletStopper]

Who is going to sell this tank on black Friday, are other vendors other than Innokin selling them?

My Vape Store already has it listed so I’m sure they will. Innokin Ares RTA by Phil Busardo and Dimitris Agrafiotis

Phil also lists Vapor DNA on his website so I think they will as well.


Sent from my iPad using Tapatalk

 

[gnees]

So we know it's a 24mm tank.
What are the other stats - height and weight?
(The Innokin site doesn't even give 24mm width )

From this pic:
View attachment 701273

I might guess the tank is about 54mm tall and the drip tip is 18mm.
And it looks moderately heavy, like maybe 58g as a wild guess.
Not heavy like a Kayfun, but not light like an Erlkonigin.

Why aren't these listed/given anywhere? DOh!

Look at the pictures on his site.
Taste Your Juice | THE INNOKIN/PLATFORM ARES RTA – INTRODUCTION

 

[capthook]

Look at the pictures on his site.
Taste Your Juice | THE INNOKIN/PLATFORM ARES RTA – INTRODUCTION

Thanks!
The very last pic in the ones under the his video show the overall tank height, including drip tip, as 54mm.
So a relatively 'shorty' of a tank.
Nice!
Now all is missing is the weight - he shows tanks on the scale in most of his reviews....

 

[DPLongo22]

Just because we made a design decision with 22mm a while ago it doesn't mean it was the right one.

Nor a wrong one.

If its a winner let's push the team for a 22mm with 1 smaller hole... to the Bastille!

Who is going to sell this tank on black Friday, are other vendors other than Innokin selling them?

 

[Carnage9270]

Thanks!
The very last pic in the ones under the his video show the overall tank height, including drip tip, as 54mm.
So a relatively 'shorty' of a tank.
Nice!
Now all is missing is the weight - he shows tanks on the scale in most of his reviews....

He won't review his own tank.

 

[Katya]

The very last pic in the ones under the his video show the overall tank height, including drip tip, as 54mm.

Yup. You were spot on!

Nor a wrong one.

Hey, we all started with 9 mm cigalikes. Then moved on to 14 mm eGos. Remember how upset we were when 19 mm clearomizers wouldn't fit on our eGos? Remember eGo beauty rings?

And then the same thing happened when those new 22 mm tanks wouldn't fit on our tube mods. Remember ProVari beauty rings?

Heck, what's another 2 mm.

 

[DPLongo22]

Grrr (#1) >>

 

[DPLongo22]

Grrr (#2) >>

 

[DPLongo22]

Remember ProVari beauty rings?

That would imply that I'm not still using them.

Heck, what's another 2 mm.

In my world, "unnecessary."

 

[Katdarling]

Do you think we might have to start designing beautification rings for the new and upcoming 26mm tanks?

 

[Katya]

That would imply that I'm not still using them.

Why? Sorry, I don't quite understand. AFAIK, most Provi users got their beauty rings and are still happily using them with their 22 mm tanks.

 

[DPLongo22]

Why? Sorry, I don't quite understand. AFAIK, most Provi users got their beauty rings and are still happily using them with their 22 mm tanks.

 

[Katya]

Do you think we might have to start designing beautification rings for the new and upcoming 26mm tanks?

Really fat silicone sleeves, for starters?

Or leather?

 

[Katdarling]

Ladies choice, deary!

 

[DPLongo22]

Really fat silicone sleeves, for starters?

Or leather?

I vote for lace.