Ask IMAGINE & S_Steve - Thread :)
- Thread starter Imagine
- Start date
- th_trl_thread_readers 0
- Status
Imagine, I placed an order on the 31st and it's still processing. Are you guys really busy? Usually my orders from SI process lightning fast! My order number is 1200028801. Could you check it for me? Thank you in advance.
no they are made out of something similar...our X2 clearos are no longer made from polycarbonate either...since all of the cracking issues.
ok.. so what step is my menopause mush brain missing?
I have a 650 2X battery that's relatively new.
I got it all charged up, attached a T3 to it and nada.
So.. I took the T3 off and cleaned the batt - shiny as new in the channel around the post -
picked a little lint out of one of the draw holes near the battery post -
even did a little post raise. (testing inbetween each step with that T3 and a clearo)
I plugged it in to a different charging wire - just in case and it is charged up.
I blew into the bottom and the battery fires no problem.
Then I tried my T3, a clearo, a nano and a carto on it and nobody wants to play with my poor rainbow 650.
is there another trouble shooting step that I've spaced out?
I have a 650 2X battery that's relatively new.
I got it all charged up, attached a T3 to it and nada.
So.. I took the T3 off and cleaned the batt - shiny as new in the channel around the post -
picked a little lint out of one of the draw holes near the battery post -
even did a little post raise. (testing inbetween each step with that T3 and a clearo)
I plugged it in to a different charging wire - just in case and it is charged up.
I blew into the bottom and the battery fires no problem.
Then I tried my T3, a clearo, a nano and a carto on it and nobody wants to play with my poor rainbow 650.
is there another trouble shooting step that I've spaced out?
I had one do the same thing. Not a brand new one though. I assume the air switch is the culprit and other than giving it a shot of canned air in the charger end, I don't know of any other trick. Even the shot of air might not work or may make things worse, so wait to see if Imagine can shed some additional light on this.
Sounds like the center post on the X2 is set just a little bit low. You can tug it up just a tiny bit with tweezers
Doesn't really sound like the switch since she blew in the bottom and it fired. I heard of some not working with the little cover cap on the bottom. Try leaving that off
I guess the big question is whether or not it's firing when inhaling on the T3/Nano or whatever.
I heard of 1 that would fire without that little cap on but once you put that cap on it wouldn't. The little air ports were wonky so it was drawing thru the USB port
Gunk in the air holes can do it. Testing with the cap off would eliminate that as a problem. Don't feel too bad, I missed the part about it firing!
I was keeping one eye on the radar screen. Hard to track row boats crossing ocean. Just got email from carnaveil cruise lines offering to handle shipments ;-)
batt post properly tugged *sigh*
the day my 2X batts get here that cap comes off the bottom.. I think I know where they all are, the caps that is....
I like the little light on the bottom (I use autos) and stealth just isn't my thing. having a jewel cover for the big batts would be great.
I have tried all 4 variety of delivery devices that I have.. no joy.
the day my 2X batts get here that cap comes off the bottom.. I think I know where they all are, the caps that is....
I like the little light on the bottom (I use autos) and stealth just isn't my thing. having a jewel cover for the big batts would be great.
I have tried all 4 variety of delivery devices that I have.. no joy.
uh.. yeah.. 6 2Xs
three of the 1300s
one of the 950s (or is that 900?)
and two of the 650s - one of these is the one in question
and lets see six 78mm and two 65mm regular volts -
ETA.. the rainbow that's giving me nothing was the one ordered on March 13th.. sigh
the ones from back in October.. kicking like new
that's without going and hitting hubby's stash
Last edited:
- Status
Similar threads
- Locked
