Attack of the (Kayfun Mini V3) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
I heard that these notch coils have very fast ramp up time
edit: but they are making it only in SS316L for now
edit2: and also there will be two versions - one for velocity style deck and another one for us
...I am looking every day in ft, gb and 3f I will let here know when I foud them
Odoslané z SM-N910F pomocou Tapatalku
edit: but they are making it only in SS316L for now
edit2: and also there will be two versions - one for velocity style deck and another one for us
...I am looking every day in ft, gb and 3f I will let here know when I foud them
Odoslané z SM-N910F pomocou Tapatalku
Last edited:
For those who have used KFL+, how does the mini compare, especially in terms of flavor?
I'm slowly working my way through this thread (currently on page 30). I have 2 KFL+ and a R91, all authentic, that I got two years ago. Love the KFL+, the R91 less so. I got authentic back then because they were my first RTAs, and I wanted to be sure that if I had problems, it wasn't because they were clones. Got a couple EHPro KFL+ and built one yesterday. Very nice except the draw is a tad tight.
Haven't spent much on hardware over the past two years, since I've been happy with my gear, but wanted to have an extra RTA or two so I'm enjoying a little binge after a period of restraint. Got a couple new Provaris on special, and am enjoying the EHPro KFL. Thinking of getting one or two of these as the binge finale.
I'm slowly working my way through this thread (currently on page 30). I have 2 KFL+ and a R91, all authentic, that I got two years ago. Love the KFL+, the R91 less so. I got authentic back then because they were my first RTAs, and I wanted to be sure that if I had problems, it wasn't because they were clones. Got a couple EHPro KFL+ and built one yesterday. Very nice except the draw is a tad tight.
Haven't spent much on hardware over the past two years, since I've been happy with my gear, but wanted to have an extra RTA or two so I'm enjoying a little binge after a period of restraint. Got a couple new Provaris on special, and am enjoying the EHPro KFL. Thinking of getting one or two of these as the binge finale.
I have only kayfun 3.1 ES and I think is very similar to kfl+ ...I think this mini is best kayfun now and flavor is better than my 3.1 ES...I dont want more flavor on next kayfun (kayfun 5?) because Ithink more flavor will blow my head away
edit: for me miniv3 is best atty now
Odoslané z SM-N910F pomocou Tapatalku
Now that I've been using the KM3 for a couple of weeks, I like it better than the KF4 except for the capacity. Both KM3 and KF4 are way better than the KFL+/3.1. 2 of the biggest improvements are top filling and juice control. You don't need any tools to fill either atomizer and you can leave it on your mod to fill. I think juice control is a misnomer. It's more of an open/close function where you can close the juice flow off for traveling so you won't have a leaking atomizer.
Hope to hear from others- it's a sweet looking little tank, but that's not quite enough to get me off the fence, especially with just 2ml capacity. For me it's all about the flavor. If I can be convinced that this will actually vape better than a KFL+, then I'm in.
I think it has a more open draw. The flavor is the same or maybe a couple of notes better. Extremely smooth draw when compared to an erlprinz.
Enviado do meu GT-I9195 através de Tapatalk
Enviado do meu GT-I9195 através de Tapatalk
Ooooo you fixed your sig.Looks much better now.The unbalanced text was hurting my brain.lol
Yes, that is 316 SS. I believe it is 4mm ID. Not sure it will not fit in the KF Mini v3.
You do not have to use TC for this coil, although it was designed for that use. SS will work fine in VW mode. I have some of these on pre-order. Will let you know.
KTM, I get quite a difference using juice flow on this...there is a big difference between 2 full turns and 3 full turns in juice flow. 2 turns will not feed my 0.9 ohm build quite as well as 2.5 - 3 turns. I can taste the difference in the density of the vapor with the extra opening of the JFC. That's just my experience.
I tested this on my 2 KM3's and found not much difference. I have read that it does flow better with thicker juices if you give it an extra turn though but mine are working fine at 2 full turns out with thick juices that I used to thin with a few drops of distilled water. 3 turns out didn't change anything for me, it was still a great vape.
I use 100% PG in mine and I open them 2 full turns. I have not tried any less or more. I think I will try opening them a little at a time until I see the bubbles and see how they work. Just curious to see if it changes how it works.
100% PG should flow fine with 1-2 turn. I can see VG needing the extra turn but I'm using 80-90% VG with 2 turns and have not seen less vapor (using TP) even while chain vaping.
I did notice that how much wick you have in there made a difference, not the juice control opening. More works better with rayon.
I did notice that how much wick you have in there made a difference, not the juice control opening. More works better with rayon.
I'll show you one of mine. Getting ready to re coil Goldie.
I started with a bare minimum of flow 1\2 turn but it seems as it ages I was forced to open it a bit.2 turns seems about right.I am using 70vg.
I started with a bare minimum of flow 1\2 turn but it seems as it ages I was forced to open it a bit.2 turns seems about right.I am using 70vg.
- Status
