Attack of the (Kayfun Mini V3) Clones!

[Jumpin' In...]

CASAA: FDA Deeming Regulations: Release and Next Steps

Per CASAA:

"The most important thing you can do is to make a call, write, or send an email to your Representative and urge them to cosponsor and support HR 2058. If there is one thing that has to be done, this is it. Encourage your family members, friends, everyone who has supported your journey to participate."

Done. I've so far done just about everything CASAA has asked of me. This is serious, people. Don't complain later if you haven't done your part.

 

[Katya]

Done. I've so far done just about everything CASAA has asked of me. This is serious, people. Don't complain later if you haven't done your part.

And on a happier note, I emailed Origin vape and told them that I was looking for SM KFv3 o-rings. They didn't even know that they were available to the dealers separately. Sent them a couple of links, and they will order them.

"Thank you for letting me know that! We will be sure to order the spares kit from SM in the next batch of Kayfuns!

Best,

OV Support"

So, if anyone is interested, stay tuned.

 

[j3suss]

My friends, I´m thinking to buy these:
focalecig.com - Kayfun Mini V3 Style 2ml 316SS RTA Rebuildable Tank Atomizer - Silver

Does somebody know if this kayfun mini v3 has a logo?

Thank you!

 

[Jumpin' In...]

And on a happier note, I emailed Origin Vape and told them that I was looking for SM KFv3 o-rings. They didn't even know that they were available to the dealers separately. Sent them a couple of links, and they will order them.

"Thank you for letting me know that! We will be sure to order the spares kit from SM in the next batch of Kayfuns!

Best,

OV Support"

So, if anyone is interested, stay tuned.

So do you intend to get the insulator kit too? How about the borosilicate glass tank section?

I guess I'd consider some of it, but my Tobeco clone has been working splendidly so far. I'm really, really enjoying this tank! Just have to remember to lube those o-rings whenever I wash it out. The more I use it, the more I like it.

If the two KM3 clones I have coming from FT are as good, I may clean, pack up and store (for travel or vapocalypse) all of the other tanks and coils I own. If the FT ones are not as good, I'm going to buy a few more Tobeco clones. I may even buy an original, just as a nod to SvoMesto (sp?). I think the KM3 is that good. Not that I have that many other types of tanks, but at this point, I'm not looking for anything better and I'll just focus on buying spare, 18650-powered, regulated mods. As a side-benefit, that would also greatly reduce the amount of stuff I have to keep in my rebuilding container/kit.

Ok, gush-fest over...

 

[Jumpin' In...]

And on a happier note, I emailed Origin Vape and told them that I was looking for SM KFv3 o-rings. They didn't even know that they were available to the dealers separately. Sent them a couple of links, and they will order them.

"Thank you for letting me know that! We will be sure to order the spares kit from SM in the next batch of Kayfuns!

Best,

OV Support"

So, if anyone is interested, stay tuned.

Btw, those o-rings are for the Mini v3, right?

 

[Cari]

I wish someone had a caliper to measure the o-rings so I could get a good supply without paying the big prices for Svoemesto's. I'd love to buy them in bulk like I have the o-rings for my KFL+s. I love all of my mini V3's (i have seven in total), but the o-rings are soooooo crappy

 

[jmarkus]

I wish someone had a caliper to measure the o-rings so I get a good supply without paying the big prices for Svoemesto's. I'd love to buy them in bulk like I have the o-rings for my KFL+s. I love all of my mini V3's (i have seven in total), but the o-rings are soooooo crappy

2x 10x1 mm o-ring
2x 9x1 mm o-ring
1x 10x1.5 mm o-ring
2x 9x1.2 mm o-ring
2x 11x1.1 mm o-ring
1x 8x1.5 mm o-ring
2x 18x1.5 mm o-ring

source:
http://www.svapobar.it/kayfun-mini-v3/3686-kayfun-mini-v3-kit-o-ring-e-viti.html

 

[Cari]

2x 10x1 mm o-ring
2x 9x1 mm o-ring
1x 10x1.5 mm o-ring
2x 9x1.2 mm o-ring
2x 11x1.1 mm o-ring
1x 8x1.5 mm o-ring
2x 18x1.5 mm o-ring

source:
http://www.svapobar.it/kayfun-mini-v3/3686-kayfun-mini-v3-kit-o-ring-e-viti.html

You are awesome!

 

[KTMRider]

My friends, I´m thinking to buy these:
focalecig.com - Kayfun Mini V3 Style 2ml 316SS RTA Rebuildable Tank Atomizer - Silver

Does somebody know if this kayfun mini v3 has a logo?

Thank you!

I bought 2 of them when they first came out (and was $17). They do have logos.

 

[ricks]

2x 10x1 mm o-ring
2x 9x1 mm o-ring
1x 10x1.5 mm o-ring
2x 9x1.2 mm o-ring
2x 11x1.1 mm o-ring
1x 8x1.5 mm o-ring
2x 18x1.5 mm o-ring

source:
http://www.svapobar.it/kayfun-mini-v3/3686-kayfun-mini-v3-kit-o-ring-e-viti.html

Isn't that too many o-rings for these??? Am I missing some?

 

[Cari]

Isn't that too many o-rings for these??? Am I missing some?

It does seem like a lot. I'll have to break one down tomorrow, and try to figure out what goes where, what I should buy a large amount of, and what o-rings I'll just need a few of. The base and airflow o-rings I will probably need a big supply of.

 

[ricks]

Just looking at the tank, I can only count 9 o-rings. Anyone have a different count?

 

[Nailz]

Got my other glass thanks from fasttech today

Ordered 12 and was concerned how many would actually turn up in 1 piece, but out of 12, only 1 was broken and it was a yellow one, which got a 5 pack, so no big deal, not bad coming all the way from china, think I am set on glass tanks now

 

[Sockeye404]

Got my other glass thanks from fasttech today

Ordered 12 and was concerned how many would actually turn up in 1 piece, but out of 12, only 1 was broken and it was a yellow one, which got a 5 pack, so no big deal, not bad coming all the way from china, think I am set on glass tanks now

Please be aware, that these tanks are not made of colored glass, they are simply painted. This paint is not resistent to some types of liquid.

 

[Nailz]

Please be aware, that these tanks are not made of colored glass, they are simply painted. This paint is not resistent to some types of liquid.

Yea I know, had kanger subtank glass from them and the same thing, once the color starts to wear off, I clean with alcohol and a good clean, still got the spare glass, just I'll have some color for a little while, and also hence why I bought 5 packs of the colors I would use mostly.

 

[ricks]

I've seen some that are not painted. These were for another tank tho.

 

[ricks]

Going to try Ekowool in my 2 KM3's today. Should be interesting... Going with 4 pieces of 2mm first.

 

[KTMRider]

Isn't that too many o-rings for these??? Am I missing some?

It's an o-ring kit. Spares so there's more than one of each for some like the high wearing o-rings that seal the tank to the deck.

 

[Katya]

So do you intend to get the insulator kit too? How about the borosilicate glass tank section?

I guess I'd consider some of it, but my Tobeco clone has been working splendidly so far. I'm really, really enjoying this tank! Just have to remember to lube those o-rings whenever I wash it out. The more I use it, the more I like it.

If the two KM3 clones I have coming from FT are as good, I may clean, pack up and store (for travel or vapocalypse) all of the other tanks and coils I own. If the FT ones are not as good, I'm going to buy a few more Tobeco clones. I may even buy an original, just as a nod to SvoMesto (sp?). I think the KM3 is that good. Not that I have that many other types of tanks, but at this point, I'm not looking for anything better and I'll just focus on buying spare, 18650-powered, regulated mods. As a side-benefit, that would also greatly reduce the amount of stuff I have to keep in my rebuilding container/kit.

Ok, gush-fest over...

I really just want better o-rings. I have a spare glass from FT. Haven't decided if I want that insulator. Maybe--depends the price.

So, you really like them? Good!

 

[Katya]

Btw, those o-rings are for the Mini v3, right?

Yes!