Attack of the (Kayfun v4) Clones!

[Raguvian]

Just wondering why people like better air flow in kayfun? More air less hit. I usually use half closed if not more otherwise it's just a lot of smoke and no hit. I smoke analogs and kayfun and need smoke and hit at the same time kayfun 4 feels way to much air flow for me. Anyhow, anybody know a good site to buy cheap thinner tips for Kayfun4? I really hate the design of the tip with lines engraved because most of the bacteria/dirt will store. I really enjoy a plain simple tip from KayFun 3.1.

I like to be able to do lung inhales. With the air screw completely removed I can get a restrictive lung inhale which I like (though I kind of want to try the 4S kit because it's still a bit too restrictive).

 

[nelsonm64]

Where did you get the Infinite version? Have not seen it for sale anywhere other than FT. And there has been some question as to if that one is actually Infinite.

Tap'd from my LG G3

i'm betting it is, FT sell a lot of Infinite/SXK products. could be wrong though

 

[jaxgator]

Well, they went and stold dwcraig's idea. Kayfun V4 "Spring Update" - By Steam Tuners - SteamTuners P.C.

 

[dwcraig1]

I like to be able to do lung inhales. With the air screw completely removed I can get a restrictive lung inhale which I like (though I kind of want to try the 4S kit because it's still a bit too restrictive).

They are coming here and affordable:
Tobeco Peek Sub Ohm Kit for Kayfun V4

 

[dwcraig1]

Well, they went and stold dwcraig's idea. Kayfun V4 "Spring Update" - By Steam Tuners - SteamTuners P.C.

My next ones will be done similar to this, mine will not be permanent either and will still have the spring. The difference is I will gently flatten the threads about midway on the grub screw and insert it the way it normally goes it. Might remove any sharp edges though on the slotted end so it doesn't tend to dig in.

 

[dwcraig1]

i'm betting it is, FT sell a lot of Infinite/SXK products. could be wrong though

They wouldn't be able to get too far with that if it wasn't true, I'd say it is Infinite too.

My 12 x 1.5 mm o-rings are arriving today, I didn't mention it but I also ordered some 12.5 x 1.5's so I will see how those fit as well and let folks know.

 

[dwcraig1]

I wish my FT stuff would stop touring California on it's way here from San Francisco, they generally truck it within the state but it looks to me that they use Greyhound and it stops at every phone booth along the way that has a Greyhound sign on it. (I know there's no more phone booths, just beach'n)

Since I already wasted this space let me share a pic of my new drip tip.

 

[Viluxia]

Well after solving my issue with the white insulators (thanks dwcraig1 once again for the help) i cant get this thing to wick, its odd - one second its fine and then it will be dry, only thing that seems to solve it for a few tokes is remove the drip tip adapter piece and screw it back down. I did notice on mine one of the flat parts wasnt finished correctly and wasnt flat like the other side, so i corrected that aswell but other than that im now lost as to why it seems to be locked in pressure.

 

[ricks]

Had to get this. Just in case something gets lost... http://www.gearbest.com/electronic-cigarettes/pp_141176.html

 

[dwcraig1]

Well after solving my issue with the white insulators (thanks dwcraig1 once again for the help) i cant get this thing to wick, its odd - one second its fine and then it will be dry, only thing that seems to solve it for a few tokes is remove the drip tip adapter piece and screw it back down. I did notice on mine one of the flat parts wasnt finished correctly and wasnt flat like the other side, so i corrected that aswell but other than that im now lost as to why it seems to be locked in pressure.

Look here for burrs at the bottom of the 4 holes on the deck, I found quite a bit of burrs on one of mine. Note the red arrow.

Also check the holes closely in #26.
Is the juice heavy VG?
If all I've mentioned is OK try making your wicks just a bit longer, make sure the ends are on the deck.

 

[Garemlin]

i'm betting it is, FT sell a lot of Infinite/SXK products. could be wrong though

I read somewhere that Infinite did not want their products sold on FT. Have no idea if it is true or why if it is they would take that stance.

 

[Garemlin]

Had to get this. Just in case something gets lost... http://www.gearbest.com/electronic-cigarettes/pp_141176.html

Everything but the square o-ring. LOL

 

[dwcraig1]

Had to get this. Just in case something gets lost... http://www.gearbest.com/electronic-cigarettes/pp_141176.html

For those that "need more" $7.37 Spare Parts Kit for Kayfun V4 RTA Atomizers (6-Pack) 6-pack at FastTech - Worldwide Free Shipping

 

[R1Barlow]

Just ordered two of those my self. Thanks for the link.

 

[bsidb]

Just posting a return point

 

[dwcraig1]

Everything but the square o-ring. LOL

It's round, it's takes the square shape when installed unless you mean it's not the right size.

 

[bsidb]

Im more into these rite now[[http://https://www.fasttech.com/product/2066104

 

[Raguvian]

Im more into these rite now[[http://https://www.fasttech.com/product/2066104

That 5 pack colored glass is tempting, although I think I'd rather just pay $11.50 for one IBTanked glass and get it in 2 days vs 2 months from FT.

My IBT tube has held up great. My coworker knocked my Kayfun off my desk yesterday facepalm and it's still just fine.

 

[ricks]

For those that "need more" $7.37 Spare Parts Kit for Kayfun V4 RTA Atomizers (6-Pack) 6-pack at FastTech - Worldwide Free Shipping

I like your find better... Why didn't you show this first. lol

 

[dwcraig1]

I like your find better... Why didn't you show this first. lol

They sell it smaller too.

But I ordered two of these, it comes with the Teflon rings and more. not there yet but soon I hope.
http://www.vaportekusa.com/kayfun-4-accessories-kit/