It is the newest trend, you get both a rebuild-able deck section for build your own type setups, but can also change it out to a commercially built ready to use disposable coil when it fits the purpose or need.
Attack of the (Kayfun v4) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
It is the newest trend, you get both a rebuild-able deck section for build your own type setups, but can also change it out to a commercially built ready to use disposable coil when it fits the purpose or need.
Oh, I don't know... maybe things like there's no original v6 that I'm aware of, for there to be a v6-like attt in the first place. I understand the what it is part- or at least what it appears to be regarding the replaceable coil head/rba deck aspect, etc. At least this seems to actually exist, unlike the last hoax that was foisted upon FT- which was a hoot. But mainly I was wanting to know if there's any hands on info, but thanks for your opinion just the same.
Maybe there is an original but I doubt it'll be packaged like the one shown here:
According to 350ZMO it fits an Aspire Atlantis type head. I could see this selling well, especially to newer vapers who are liking the idea of a pre-made head to fall back on if building their own doesn't work for them. Even more experienced people could see a benefit in the flexability.
Last edited:
Oh, I don't know... maybe things like there's no original v6 that I'm aware of, for there to be a v6-like attt in the first place. I understand the what it is part- or at least what it appears to be regarding the replaceable coil head/rba deck aspect, etc. At least this seems to actually exist, unlike the last hoax that was foisted upon FT- which was a hoot. But mainly I was wanting to know if there's any hands on info, but thanks for your opinion just the same.
Maybe there is an original but I doubt it'll be packaged like the one shown here:
According to 350ZMO it fits an Aspire Atlantis type head. I could see this selling well, especially to newer vapers who are liking the idea of a pre-made head to fall back on if building their own doesn't work for them. Even more experienced people could see a benefit in the flexability.
Oh yeah, there is definitely no v6, hah. This thing is just trying to capitalize off the kayfun name and styling and the current sub ohm clearo trend.
The concept of the tank is fine, sub ohm clearo with optional rba head. Its just poorly executed, IMO.
I would rather get a delta ii, or subtank mini for a few bucks more and actually have a RBA section worth using. Or if I wanted something just for Atlantis coils on the cheap I'd get a Melo for less than this thing.
The photos clearly show it using an Atlantis clone/style coil, it does not surprise me an Aspire Atlantis coil would work, but cool that its confirmed.
Sent from my Nexus 6 using Tapatalk
Whoa.
Usually don't care about packaging, especially clone products, but that has to be the worst I've ever seen. [emoji15]
Usually don't care about packaging, especially clone products, but that has to be the worst I've ever seen. [emoji15]
It is pretty bad, and its not really a clone of anything.
Remember this photo? I think the SM designers used it as a guide when they designed the K4.
^^^^^Kayfun 4 ^^^^^ (hoax)
^^^^^Kayfun 4 ^^^^^ (hoax)
Remember this photo? I think the SM designers used it as a guide when they designed the K4.
^^^^^Kayfun 4 ^^^^^ (hoax)
Isn't that a airplane engine?
Remember this photo? I think the SM designers used it as a guide when they designed the K4.
^^^^^Kayfun 4 ^^^^^ (hoax)
I think this was from a website that was showing their CNC machine capabilities. These machines are pretty cool.
I agree rick a CNC is way beyond cool! BTW my birthday is coming up
Mine's tomorrow...
Have tobeco kayfun4 clone,cannot remove chimney from base,couple built before was fine,any idea
If the rubber bands don't work for you try some tape, masking tape is what I usually use, build it up fairly thick, maybe a half inch or more, serves a few purposes, provides more leverage, helps firm up the chimney, prevents marring if you need to use a pliers. I can usually get them loose by gripping it close as possible to the threaded portion, if not tape helps. If you grip it to high it seems to flex a bit, and cause it to bind.
Vapor Chronicles posted an interesting vid review on a pre-production Lemo 2.
Appears Lemo may have bested K4 for top fill convenience. Very nice build deck too. But deck is still not accessible until empty.
Replace a k4? Don't think so. But will be nice to have in rotation for times when one wants low Ωs and lots of airflow in a rta.
Appears Lemo may have bested K4 for top fill convenience. Very nice build deck too. But deck is still not accessible until empty.
Replace a k4? Don't think so. But will be nice to have in rotation for times when one wants low Ωs and lots of airflow in a rta.
"Elmo" - "nailed it" "your grandma will love it"
But my ErlK clone comes on Friday, with the nano kit coming from FT.
But my ErlK clone comes on Friday, with the nano kit coming from FT.
Anyone try the EHPro Updated Kayfun 4? I was going to order one but wanted to double check with the community first.
- Status
