Authentic Svoemesto Kayfun 5

[JUMA55]

Does anyone know of a drip tip that is either POM or Delrin in black that would fit both the kayfun 5 and the kayfun Mini3? I'd like something with the inside and outside diameter of the KFM3 stock tip but is a bit taller. When mounted in the KFM3, I measure the stock tip at about 6mm, so I think something in the 8 or 9mm range would be good. And I want the drip tip to be very tight. I hate wobbly drip tips. To be even further picky I'd like it to be a simple cylinder.

I'm not sure the exact difference between POM and Delrin. In my mouth they feel about the same.

I like the idea of the removable POM part on the KF5 tip, and I could live with the size. But the only replacement I've seen that's taller is on Creme de vape by Forty Four. The taller one looks nice, but I'd like black instead of colors.

Any suggestions? Thanks.

 

[HBcorpse]

Yesterday was a sad day indeed, as we received word that Leo of ByLeo, father to Billie-cig, has passed away.

Members of our community are leaving their condolences on the ByLeo thread here:

By Leo : Attys, mods, Drip-tips, tanks

 

[Bronze]

Yesterday was a sad day indeed, as we received word that Leo of ByLeo, father to Billie-cig, has passed away.

Members of our community are leaving their condolences on the ByLeo thread here:

By Leo : Attys, mods, Drip-tips, tanks

That is sad!

 

[qorax]

Yesterday was a sad day indeed, as we received word that Leo of ByLeo, father to Billie-cig, has passed away.

Members of our community are leaving their condolences on the ByLeo thread here:

By Leo : Attys, mods, Drip-tips, tanks

A very sad news indeed. Sorry for not viewing that thread as frequently as I used to. Hitting it now. Thanks for the info brother.

 

[Bronze]

I see HHV finally got their K5's from Svoemesto.

Kayfun v5 by SvoeMesto - $119.99 : Heather’s Heavenly Vapes, Top Quality Custom E-Liquids

 

[ufaiq]

Captain's log, stardate 41153.7.. Just a heads-up for the temp control users, for a while the ohm reading on the my SX Mini ML was off by a mile with the Kayfun v5. So previously when I use the hooks to pin my nickel coil, I guessed that it is giving me innacurate resistance. I assume that the hook gives additional resistance to my nickel coil.

To address this issue, I now directly pin the coil to the screw and cut the ends. For about an hour now, my ohm is stable and the vape is awesome on the Kayfun v5. If the problem does come back, I will report the issue here for everyone's benefit.

This problem I notice only occurs on the Yihi chip but on the Evolv chip the issue is a little less pronounced.

Until then, happy vaping [emoji1360][emoji1360]


Sent from my iPhone using Tapatalk

 

[Pete54]

I had the same problem but the fix was that the 510 screw was loose so tightening it up solved all issues. Seems that many come loosely assembled from the factory.

 

[MKBarca]

I see HHV finally got their K5's from Svoemesto.

Kayfun v5 by SvoeMesto - $119.99 : Heather’s Heavenly Vapes, Top Quality Custom E-Liquids

Bronze, did I read correctly earlier in this thread, that you vape around 1.4 at 10watts? Your battery life must be amazing. I rarely go over 12watts but 10 must be superb for battery life.

 

[Mactavish]

I had the same problem but the fix was that the 510 screw was loose so tightening it up solved all issues. Seems that many come loosely assembled from the factory.

Exactly, I reported this long a go. The 510 pin has to be SUPER tight. Have not had any ohm issues since.

 

[Bronze]

Bronze, did I read correctly earlier in this thread, that you vape around 1.4 at 10watts? Your battery life must be amazing. I rarely go over 12watts but 10 must be superb for battery life.

That would be correct. I can't say if the battery life is amazing because I cannot compare it to anything.

I use an 18350 and I get 2.0 - 2.3mls before the battery craps out.

 

[MKBarca]

That would be correct. I can't say if the battery life is amazing because I cannot compare it to anything.

I use an 18350 and I get 2.0 - 2.3mls before the battery craps out.

Oh that would drive me insane having to carry lots of little 18350s in my pocket if out and about. But I do love a P3 in 18350 mode.

 

[Bronze]

Oh that would drive me insane having to carry lots of little 18350s in my pocket if out and about. But I do love a P3 in 18350 mode.

Well, that's what I use around the house. I like the small profile of a P3 in mini mode and a KM3. If I need to go out and about I can switch to 18490/K5 mode. Nice to be versatile.

 

[Bronze]

Well, that's what I use around the house. I like the small profile of a P3 in mini mode and a KM3. If I need to go out and about I can switch to 18490/K5 mode. Nice to be versatile.

BTW, as soon as I go to 18490 mode on my P3 I start knocking it over in record fashion.

 

[Bronze]

BTW, as soon as I go to 18490 mode on my P3 I start knocking it over in record fashion.

And I haven't used 18650 mode in years. Feels like I'm hauling around a Mag lite.

 

[jwbnyc]

Steel tanks in stock at Origin.

 

[ufaiq]

Exactly, I reported this long a go. The 510 pin has to be SUPER tight. Have not had any ohm issues since.

I can confirm here with TC, the 510 screw needs to be SUPER tight to ensure good reading of the resistance. It happened again just now and I tighten the 510 and the resistance went down to normal again. Thanks for pointing that out Mactavish


Sent from my iPhone using Tapatalk

 

[MKBarca]

BTW, as soon as I go to 18490 mode on my P3 I start knocking it over in record fashion.

And not a box mod in sight?

 

[ufaiq]

Sad to report, I still have the problem. Celebrated prematurely.


Sent from my iPhone using Tapatalk

 

[Mactavish]

Sad to report, I still have the problem. Celebrated prematurely.


Sent from my iPhone using Tapatalk

Try taking it apart, cleaning and put it together again. May help.

 

[Bronze]

And not a box mod in sight?

Not yet.