Authentic Svoemesto Kayfun Mini V3

Status
Not open for further replies.

Woofer

Vaping Master
ECF Veteran
Oct 8, 2014
3,894
15,371
PA, SK, CA
I think your original question was answered, what are you getting at? Bronze and stealth have already gave you their slight differences between the tanks.

I thought I was pretty clear, I disagree with Q that the Achilles and KM3 are "Two entirely different types of atties, with two different types of vape experience." The ensuing discussion had nothing to do with my original question and I didn't care to discuss it further.

What are you getting at?
 
  • Like
Reactions: AstroTurf

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,933
61
sarasota,fl
I thought I was pretty clear, I disagree with Q that the Achilles and KM3 are "Two entirely different types of atties, with two different types of vape experience." The ensuing discussion had nothing to do with my original question and I didn't care to discuss it further.

What are you getting at?
I am getting at, that it's a freaken opinion! If he feels like it's 2 different types of vapes, that's his opinion and no reason to get all .... hurt, and get all ...... off about it. At least to me, and excuse me if I am wrong, but you put out a few questions just to start some crap. All I am saying, if i had asked a couple people what they thought were the differences between 2 different tanks that they own were, I wouldn't respond back negatively and whole heartedly disagree with an attitude.

Sent from my SCH-I545 using Tapatalk
 

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,933
61
sarasota,fl
Sorry brother, got caught up :( Editing it now, shall upload it tonight.
Ok, i will let you slide on this one.... but honestly we all do appreciate the time and effort you spend making these, I used to do some vids back in the day and it's a time consuming operation.

Sent from my SCH-I545 using Tapatalk
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Ok, i will let you slide on this one.... but honestly we all do appreciate the time and effort you spend making these, I used to do some vids back in the day and it's a time consuming operation.

Sent from my SCH-I545 using Tapatalk
Editing is the hardest part. From two hrs. of raw clips I have to bring it down to 15-20 minutes. And have to keep it both relevant as well as interesting. Else you guys will kick my A55 :)
 

Woofer

Vaping Master
ECF Veteran
Oct 8, 2014
3,894
15,371
PA, SK, CA
I am getting at, that it's a freaken opinion! If he feels like it's 2 different types of vapes, that's his opinion and no reason to get all .... hurt, and get all ...... off about it. At least to me, and excuse me if I am wrong, but you put out a few questions just to start some crap. All I am saying, if i had asked a couple people what they thought were the differences between 2 different tanks that they own were, I wouldn't respond back negatively and whole heartedly disagree with an attitude.

Sent from my SCH-I545 using Tapatalk

Perhaps you should go back and read everything I said. Then you can apologize for the nonsense quoted above.

Infact you can go back and read everything I have ever posted in any KM3 thread and show me where I was anything but polite.

I tagged two friends in this thread with a specific question, they answered and I thanked them. That is the end of it.

I don't agree with Q's opinion and I told him why. I was polite and friendly I even put a cheers at the end of the post.

I don't wish to discuss what Q said because 1)I don't care either way, 2)his statement was vague and general. 3)I don't think Q owns an Achilles V2. And last but not least 4)I didn't want to disrupt the thread. I was not rude to anyone in anything I posted.
 

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,933
61
sarasota,fl
Perhaps you should go back and read everything I said. Then you can apologize for the nonsense quoted above.

Infact you can go back and read everything I have ever posted in any KM3 thread and show me where I was anything but polite.

I tagged two friends in this thread with a specific question, they answered and I thanked them. That is the end of it.

I don't agree with Q's opinion and I told him why. I was polite and friendly I even put a cheers at the end of the post.

I don't wish to discuss what Q said because 1)I don't care either way, 2)his statement was vague and general. 3)I don't think Q owns an Achilles V2. And last but not least 4)I didn't want to disrupt the thread. I was not rude to anyone in anything I posted.
Hey sorry my friend and let's end it here. It just seemed that from an opinion by Q, you responded negatively and commented, even though you don't even own a km3, that it's a leaky and gurgly tank. I just thought that was kind of below the belt and I'm sorry if I took it wrong..... Q then responded that it doesn't do either of those and you seemed again to have an attitude about it by saying that his response had nothing to do with your original question and then something about a rabbit hole. It all just seemed weird to me and in my eyes it sounded like you were just bringing up a question to purposely put down a devise that you don't even own. Sorry again if I'm reading more into it then there really is and I apologize

Sent from my SCH-I545 using Tapatalk
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Q, where's the video? You Got me already for some tech and now nothing![emoji20]
Sorry brother, got caught up :( Editing it now, shall upload it tonight.
Here you go my friend/s
cool04.gif


 

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,933
61
sarasota,fl
Well done Q! Mesh can be great if done properly and I still run it from time to time and have a current build as well in the km3. I'm glad to see people using it because of its potential of being perhaps one of the greatest wicks ever. Cotton has definitely made mesh an almost forgotten wick because of it ease, but if one likes to rebuild, it's a must try... thanks

Sent from my SCH-I545 using Tapatalk
 

Woofer

Vaping Master
ECF Veteran
Oct 8, 2014
3,894
15,371
PA, SK, CA
Hey sorry my friend and let's end it here. It just seemed that from an opinion by Q, you responded negatively and commented, even though you don't even own a km3, that it's a leaky and gurgly tank. I just thought that was kind of below the belt and I'm sorry if I took it wrong..... Q then responded that it doesn't do either of those and you seemed again to have an attitude about it by saying that his response had nothing to do with your original question and then something about a rabbit hole. It all just seemed weird to me and in my eyes it sounded like you were just bringing up a question to purposely put down a devise that you don't even own. Sorry again if I'm reading more into it then there really is and I apologize

Sent from my SCH-I545 using Tapatalk

If polite disagreement is responding negatively then I am guilty as charged.

I did not say the KF3 is leaky and gurgle I said "(2)the Kayfuns just use a more complicated and leak/gurgle prone juice delivery system. :w00t:". I stand by that statement and can expand it to say that all tanks that use the Kayfun system of air over liquid (nearly all tanks) are more complicated and leak/gurgle prone than the Achilles.

Regardless apology accepted, I have nothing further and bid you all adieu, to much drama here.
 

JoeBattams

Senior Member
ECF Veteran
Verified Member
Nov 3, 2012
178
341
41
Northampton- UK
Been away from this thread from a while! I'm loving my KFM3 and use it every day- my vape cupboard is full of currently unused atties at the moment! However, one thing i've noticed is that eliquid does tend to seep through the base plate and onto the mod- I end up taking it off the mod and wiping away the eliquid a couple of times a day- it's nothing major, just a bit of an annoyance really.

Cant work out what's causing it- definately not coming from the airflow holes, but rather through the 'seem' between the baseplate and the bottom of the atty. Cant screw it any tighter either as the 510 screw has reached it's 'stop'- anyone else having this?
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Been away from this thread from a while! I'm loving my KFM3 and use it every day- my vape cupboard is full of currently unused atties at the moment! However, one thing i've noticed is that eliquid does tend to seep through the base plate and onto the mod- I end up taking it off the mod and wiping away the eliquid a couple of times a day- it's nothing major, just a bit of an annoyance really.

Cant work out what's causing it- definately not coming from the airflow holes, but rather through the 'seem' between the baseplate and the bottom of the atty. Cant screw it any tighter either as the 510 screw has reached it's 'stop'- anyone else having this?
Doesn't happen with mine. It has remained bone dry, top to bottom, since purchased 4-months back.

In any case, bottom airfed atties will leak if the chamber remains oversaturated. And that's build related, aka 'too less cotton'. Pls beef it up a bit.
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
@Bronze - I'm loving the HHV High PG's! 70 is pretty darn tasty!

And it's not getting harsh at all, like I worried. I swear VG builds up on my tongue or something with MTL. All that dense vapor sitting there before the inhale.

I'm moving to 70/30 PG/VG at least. Is that what you use?


*Edited because I said high vg when I meant high pg.... I'm losing my darn mind.

Sent from my SM-N920V using Tapatalk
Yes, I use 70/30. It pays to experiment at different ratios to see what works best for you. People react differently to be sure. I notice a lot of vendors select 70/30 as their standard. I guess they feel it gives their flavors the right balance between flavor and vapor. I've done 100% VG, 50/50 and others. 70/30 seems to work for me. I'm surprised at the number of people who have reactions to PG. I'm even seeing some who claim they don't get along with VG.
 
Status
Not open for further replies.

Users who are viewing this thread