Building Custom Pipes

[Big Juicy]

Limited Edition Damascus Steel Mjolnir by EPM. 18350 with a Ravens Nest and Captivape DS90.

He spoke to ECF friend Jeff McCollum from day 1...and two sales removed from me he ended up finding his home. I ADORE this pipe...I just had too many. I regret selling this one quite a bit...that's all I will say about that.

 

[Big Juicy]

This might be the pipe I am most proud of. One of a kind by Duckie. I commented on how much I liked it and dude just GAVE it to me. He refused payment (I sent him a bunch of juice anyways). It is my pride and joy and humbles me every day. 18350 carved from a fallen peach tree in the duckster's backyard. There is an Aspire mini nova under the hood.

 

[Big Juicy]

Last to leave the herd and a day doesnt go by I dont regret it. a MASSIVE Mahagony behemoth V1 EPM. Sent to our EPM historian and museum curator Dirquist up in Washington. I should have never sold it...but...long story...and Dirq is the man to have it.

 

[Big Juicy]

Other than Jerome, I use this mod more than any other. He is used exclusively for NETCOM cig juices and my beloved cigar NET's. 18500 Torpedo in Claro Walnut by EPM. Custom Cirrus "cigar band" tank and custom cigar drip tip carved in Claro Walnut for me by Molehill Mountain.

fricking Monte

 

[Cromeus]

I read through (or skimmed) the whole thread, but I didn't see a price or potential release date?

Sent from my Nexus 5 using Tapatalk

 

[Big Juicy]

The Blue Wizard...Morinehtar, the Darkness Slayer. 18500 Maple "Blue Wizard" by EPM. First pipe Matt cut in the new shop. I had stocked up on pipes but somebosy on the inner circle had to grab this piece of history. Blue Protank2 (that just came in the mail and doesn't work) and a ocean blue churchwarden by Walker Briar Works.

 

[Big Juicy]

18500 one of kind custom by EPM. I still can't believe I got this guy. I cherish him.

Simple setup here, taken from the man himself:

"Bright blue his bowl and stem base are, and his tank is yellow."

 

[SimianSteam]

Last to leave the herd and a day doesnt go by I dont regret it. a MASSIVE Mahagony behemoth V1 EPM. Sent to our EPM historian and museum curator Dirquist up in Washington. I should have never sold it...but...long story...and Dirq is the man to have it.

Is that one of the ones with the bottle cap button?

 

[Big Juicy]

It had the V1 button. Not literally a bottle cap and not sure what people call it. But yes, a V1 button.

ePipeMods Hand Crafted Single Battery Electronic Pipes

 

[Mstr Mashnst]

Custom 18350 Calabash in dark briar by the exquisite hands of Luis Wiesenthal at labuenapipa. Last custom he ever did too. That guy is one of the wonderful people on earth and his work is stunning.

That is one beautiful pipe. Thank you for sharing.

 

[Mstr Mashnst]

I read through (or skimmed) the whole thread, but I didn't see a price or potential release date?

Sent from my Nexus 5 using Tapatalk

Still working on price. Have some test pipes out in the field and I'm still making small upgrades. Shouldn't be much longer.

 

[Birddog]

Been away for a little while. Glad to see all of the work that you've done. Look forward to seeing what these will run.

 

[Cromeus]

Still working on price. Have some test pipes out in the field and I'm still making small upgrades. Shouldn't be much longer.

Okay. I love the compatibility with the mini protank - my most commonly used tank, even though I have tanks that outdo it in almost every way; I just like the form factor.

Will your stem fit the Kayfun mini? 14mm x 60mm

Are you willing to sell a test pipe?

Sent from my Nexus 5 using Tapatalk

 

[Mstr Mashnst]

Okay. I love the compatibility with the mini protank - my most commonly used tank, even though I have tanks that outdo it in almost every way; I just like the form factor.

Will your stem fit the Kayfun mini? 14mm x 60mm

Are you willing to sell a test pipe?

Sent from my Nexus 5 using Tapatalk

The chamber inside the mouth piece is 15mm x 77mm. I tried to make it fit all the minies. I have never seen a Kayfun mini, yet. I would like to test fit it before I said yes for sure, that it would fit. As far as the beta test pipes go, the people that have them are close to me. Where if they have a problem, we can meet and I can fix it. So far there has been no problems. One by one I'm putting in the new center post as an upgrade. I'm working hard to get this all up and running.

Been away for a little while. Glad to see all of the work that you've done. Look forward to seeing what these will run.

Glad to see you back. Make sure to wipe your feet next time you stop by.

 

[Cromeus]

The chamber inside the mouth piece is 15mm x 77mm. I tried to make it fit all the minies. I have never seen a Kayfun mini, yet. I would like to test fit it before I said yes for sure, that it would fit. As far as the beta test pipes go, the people that have them are close to me. Where if they have a problem, we can meet and I can fix it. So far there has been no problems. One by one I'm putting in the new center post as an upgrade. I'm working hard to get this all up and running.

Fair enough; I wouldn't work, up in Canada. =p
The kf mini is probably the most expensive topper of its size, at about $165us shipped


Sent from my Nexus 5 using Tapatalk

 

[askernie]

You are very kind, thank you.

As I said before the DIY market, as I see it, is a small market but, I think it is very important. Input from people like you is what I need. I'm new to this whole vape thing and what I know about it you can fit in this space > ( ). Well maybe a little more then that but not much. What I can do is manufacture products like you have never seen before. I could make a battery holder that the wires ran up the sides and had set screw wire connectors. Have long leads on the adaptor so all you had to do was cut the wire to lenght, put it in the hole and tighten down the set screw. Make a twist on cap/switch combo and that would be the drop in kit. That should keep me up all night thinking. lol Pipes are my first goal then I will work into DIY kits. Sounds like you would be willing to test a kit proto-type for me.

Come to think about it....I have a " Emperor" Model Corn Cob pipe that would be perfect to test a proto-type on...hmmm

Keep me in mind...I love to.

Thanks

ernie

 

[Mstr Mashnst]

Fair enough; I wouldn't work, up in Canada. =p
The kf mini is probably the most expensive topper of its size, at about $165us shipped


Sent from my Nexus 5 using Tapatalk

Canada would be a long drive for me if you had a problem. lol What makes a $165 tank so good?

 

[Cromeus]

Canada would be a long drive for me if you had a problem. lol What makes a $165 tank so good?

No idea, I'm still waiting for my $19 Chinese clone of the full size one to arrive =p


Sent from my Nexus 5 using Tapatalk

 

[Mstr Mashnst]

No idea, I'm still waiting for my $19 Chinese clone of the full size one to arrive =p


Sent from my Nexus 5 using Tapatalk

My luck I would spend 165 bones on a top end tank and it would burn out the first time I used it.lol

 

[Cromeus]

My luck I would spend 165 bones on a top end tank and it would burn out the first time I used it.lol

I don't know what I want yet, so I've bought some of everything available as a Chinese clone, lol. I do know my favorite mods are pipes though, and yours look amazing.

Sent from my Nexus 5 using Tapatalk