[CLOSED BUSINESS]

[MFToms59]

build "high" and ramp the power up! 2Ω coil - yeah 2 - no typo!

Nice to see you back!

T

Correct, these regulated mods are made to avoid sub-ohm builds, flubbed the numbers, disregard
One reason the DNA20 would satisfy me, I run 2-2.5 ohm coils, and rarely go over 13-16 watts... guess I'm wimpy like that.

 

[supertrunker]

i chose a different way! Even if i allow for the massive v-drop i incur with my suicidal coils, i'm well over what any DNA can out.

HRH (keeper of all the Cruisers) never uses sub-ohm coils; there's a purity about vaping to keep away from cigarettes and nothing more.

T

 

[Sirius]

build "high" and ramp the power up! 2Ω coil - yeah 2 - no typo!

Nice to see you back!

T

Will do..I liked the 1.2 ohm coil much than my first try at .4 ohms..Holy cow..about blew my lungs out!
Ty nice to be back bro.

 

[Sirius]

Correct, these regulated Mods are made to avoid sub-ohm builds, you'd never get a DNA to put out 30 watts with a .5 ohm build, it can't put out 60 volts.

One reason the DNA20 would satisfy me, I run 2-2.5 ohm coils, and rarely go over 13-16 watts... guess I'm wimpy like that.

This Sig 100 is telling me at 30 watts on this 1.2 ohm is 6.1 volts..That's a pretty good vape.

 

[thejager]

Got my first rsm. Impressed. Used an a7 and it was good. Just got an hstone plus+. Mesh build. Wonderful.

Any suggestions bottle squeezing? I feel like I have to really grab the thing to get it to come out quick

Thx Brian for your great work!

 

[MFToms59]

This Sig 100 is telling me at 30 watts on this 1.2 ohm is 6.1 volts..That's a pretty good vape.

I drink alone.................................................................

 

[MFToms59]

Ok, finally took a couple of poor photos, my Cruiser African Mahogany/ Walnut & RM2, 28 Nichrome micro @1 ohm, vaping some tasty DIY NET, Padron 1926 Anniversary Cigar.... Yummmmm

 

[Sirius]

I drink alone.................................................................

Hahaha! Shame on you....I have..no fun at all.

 

[Sirius]

Ok, finally took a couple of poor photos, my Cruiser African Mahogany/ Walnut & RM2, 28 Nichrome micro @1 ohm, vaping some tasty DIY NET, Padron 1926 Anniversary Cigar.... Yummmmm

That's awesome bro!

 

[supertrunker]

i'd have gone for that one or the elder burl cruiser. I'm glad you got it - it a great wood combination. I'm also under a "i'll kill you - no more mods till 2015" threat from HRH.

Not that that ever stopped me, but i'll need a good dentist for disobedience.

T

 

[Sirius]

i'd have gone for that one or the elder burl cruiser. I'm glad you got it - it a great wood combination. I'm also under a "i'll kill you - no more mods till 2015" threat from HRH.

Not that that ever stopped me, but i'll need a good dentist for disobedience.

T

Poor Trunker!

I told ya you should have gotten HRH a couple of Yorkie's!

 

[supertrunker]

Yorkies are not for girls!

Yorkie - It´s NOT for girls - YouTube

It's chocolate.

T

 

[fright88]

Got my first rsm. Impressed. Used an a7 and it was good. Just got an hstone plus+. Mesh build. Wonderful.

Any suggestions bottle squeezing? I feel like I have to really grab the thing to get it to come out quick

Thx Brian for your great work!

Keeping the bottle more full makes squonking easier. So on newer bottles I try to fill them fairly often. I also like to work with new bottles squeezing them a bunch before I use them for the first time. Or I will use them in my Grip for the first week or so (the plunger button thing is nice for newer bottles although I have a hell of a time getting anything out of a bottle with less that 1/3 juice).

Honestly I wouldn't mind trying some softer bottles if I ever found a good source.

 

[Sirius]

Yorkies are not for girls!

Yorkie - It´s NOT for girls - YouTube

It's chocolate.

T

Too funny mate!

 

[TheTurk]

Anybody have a solution for no contact with larger atties at milled down cruisers?

 

[RiverNut]

there's really only 2 options

adjust the pin of the atty if it's adjustable
or
take more off the top of the Cruiser


I don't understand why the 510 length on atties isn't standardized. I have a couple that won't connect on my Grand too. It'll be interesting to see Rob's new 510 design.

 

[TheTurk]

there's really only 2 options

adjust the pin of the atty if it's adjustable
or
take more off the top of the Cruiser


I don't understand why the 510 length on atties isn't standardized. I have a couple that won't connect on my Grand too. It'll be interesting to see Rob's new 510 design.

Yea there is not many atties out there with adjustable pin especially when it comes to bf ones...
Captain did a very good job on milling the catch cup on my cruiser almost flash with the mod bit more and itll hit the mod which i dont wanna do
Now that im thinking it might be an option to take off like 1/2 mm of the mod along with the catch cup at 23,5 mm diameter and refinish the wood thats been shaved off any atty would fit perfectly , what do you think?

 

[pwheeler]

I won't risk damage to my Cruiser doing that. I managed to get my Nuppin to work. The center pin is backed out to the point that the juice hole is right above the insulator and the positive wire hole is about 1-1.5mm above the deck. This Nuppin will stay on this Cruiser now, although the small attys work fine without any adjustments. My catch cup was taken down virtually flush with the mod. I feel it's up to me to make some of these larger attys fit if I want that.

 

[TheTurk]

Well , i have no intention of doing such a project myself since ill most likely mess it up but i was thinking RSM may offer a professional service like this ,
If such an idea work out it would make money as an extra service and save him money and hassle trying replace existing 510 with adjustable 510
Again this is IF such modding would work without hurting the mod itself....

 

[pwheeler]

That would be great if he could do that. I'm hoping we'll see some good things come of the adjustable 510s. Other than that, I don't see any other option than to mill an extra 2mm off the top and refinish.