Ah Barbados...
The best of times and the worst of times.
Still haven't been able to locate my pants after the gypsy belly dancing competition I totally won but the judges were too drunk to recognise.
[CLOSED BUSINESS]
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
The best of times and the worst of times.
Still haven't been able to locate my pants after the gypsy belly dancing competition I totally won but the judges were too drunk to recognise.
hey. i was one of the judges.
while the rum and grog were flowing, i have a hazy memory that it wasn't on the up and up
hope to score one of the new ones
ETA: i vaguely recall someone mentioned "moobs"
Best of times, worst of times - a Tale of Two Cities.
"do you like Dickens?"
"yeah, but not on a first date"
T
"do you like Dickens?"
"yeah, but not on a first date"
T
I'm at work and just got looks because this and "moobs" cracked me up.Best of times, worst of times - a Tale of Two Cities.
"do you like Dickens?"
"yeah, but not on a first date"
T
Ahoy and Aloha!
I put up a couple more Cruisers on the website. I also put them on sale at base price, basically the engravings and inlays are free. They will be on sale 'till I remember to end it, sometimes that takes a while! I'm getting forgetful, arrr
Here are pics of the latest two Cruisers. One has an inlay and the other a Dragon engraving .. RAWWRRRR!
Hope the week is treating you all well.
arrr
I put up a couple more Cruisers on the website. I also put them on sale at base price, basically the engravings and inlays are free. They will be on sale 'till I remember to end it, sometimes that takes a while! I'm getting forgetful, arrr
Here are pics of the latest two Cruisers. One has an inlay and the other a Dragon engraving .. RAWWRRRR!
Hope the week is treating you all well.
arrr
Ahoy and Aloha!
I put up a couple more Cruisers on the website. I also put them on sale at base price, basically the engravings and inlays are free. They will be on sale 'till I remember to end it, sometimes that takes a while! I'm getting forgetful, arrr
Here are pics of the latest two Cruisers. One has an inlay and the other a Dragon engraving .. RAWWRRRR!
Hope the week is treating you all well.
arrr
Lookin Good Capt'.
Any DNA40 Destroyers on the Horizon????? Arrrrrrr
They are not as popular as the Cutlass's, but I have 3 that are being built with the current batch.
I meant to have them done sooner, but realized I needed to make some Cruisers again to help keep me alive financially until I could get the regulated mods done. Desk caddy sales have kinda sucked the last 6 months so I needed to get some Cruisers done fast to help out.
I can make a Cruiser in about half the time it takes to do a regulated mod.
A little promotional content going on right here..........
http://www.e-cigarette-forum.com/forum/reos-mods/656869-lemme-see-them-vape-stands.html
Any Cruisers with an inlay and the stainless hardware/ flush 510 coming up in this batch Cap?
Last edited:
A little promotional content going on right here..........
http://www.e-cigarette-forum.com/forum/reos-mods/656869-lemme-see-them-vape-stands.html
Any Cruisers with an inlay and the stainless hardware/ flush 510 coming up in this batch Cap?
Inlay, flush, SS button... no, but yes. I can swap the switches on the last two Cruisers of the batch to make it so I think. I'll post pics tomorrow of the last of them going up on the website.
I do a search on the internet from time to time looking for designs. I try to find ones that are simple enough to engrave and still look good like clip-art, line drawings and the like. Not as easy as you might think, heh.
Have a great weekend all, arrr
Just stopping by Cappy to tell you I got yhe mini in on Thursday. I'm just loving the mini-ness of it. It's a beauty! Will send pics when I get it set up!
Hi guys. I have been absentee for a while... life has been really busy for me the past few months...
I am writing now because I managed to do something to my beloved DNA30 cutlass... it won't turn on. I think maybe juice got into the DNA30 part? I don't know. Is there a fuse reset for the DNA30? I'd like to try that first if possible. Any suggestions?
. I have been absentee for a while... life has been really busy for me the past few months...I am writing now because I managed to do something to my beloved DNA30 cutlass... it won't turn on. I think maybe juice got into the DNA30 part? I don't know. Is there a fuse reset for the DNA30? I'd like to try that first if possible. Any suggestions
?
Hi guys
I am writing now because I managed to do something to my beloved DNA30 cutlass... it won't turn on. I think maybe juice got into the DNA30 part? I don't know. Is there a fuse reset for the DNA30? I'd like to try that first if possible. Any suggestions
Ahoy gg, good to see ya on the thread!
No, no actual fuse I'm afraid. If you have tried all the usual fixes, then it might be time to send her on in for a bit of troubleshooting.
Hi guys
Welcome back GG I hope you're doing well, Good Luck with your Cutlass.
Ok, I'll mail it back to your website address tomorrow...I need it!!! LOL!
Ahoy all, happy Wednesday.
Did some maintenance in the shop today and also now have doors for all the mods and the back panel inserts have been glued in, sanded down and the boxes are ready for internal routing now. Next comes hours and hours of using routers, hand chisels, scrapers, gougers, sandpaper and bandaids. Fun time at RSM begins!
Have a great week all, arrr
Did some maintenance in the shop today and also now have doors for all the mods and the back panel inserts have been glued in, sanded down and the boxes are ready for internal routing now. Next comes hours and hours of using routers, hand chisels, scrapers, gougers, sandpaper and bandaids. Fun time at RSM begins!
Have a great week all, arrr
Ahoy all, happy Friday!
Well, it's been pretty slow around here, so time to stir the pot just a bit.
Time for a thread subscription check and giveaway.
Next weekend I am going to give away the pretty little black scallywag I made. (14500 batt, 3ml bottom feeder)
I am not going to mention it anywhere and it would benefit anyone seeing this to NOT pass the word around. The less people who see it the better for YOU.
I will write down the name of everyone who makes at least one post on this thread for the next week and put their name in the hat.
Next weekend I will draw a name at random.
As there has at times only been one or two posts per week lately, the odds may greatly be in your favor.
Cheers and have a find weekend all, arrr
Well, it's been pretty slow around here, so time to stir the pot just a bit.
Time for a thread subscription check and giveaway.
Next weekend I am going to give away the pretty little black scallywag I made. (14500 batt, 3ml bottom feeder)
I am not going to mention it anywhere and it would benefit anyone seeing this to NOT pass the word around. The less people who see it the better for YOU.
I will write down the name of everyone who makes at least one post on this thread for the next week and put their name in the hat.
Next weekend I will draw a name at random.
As there has at times only been one or two posts per week lately, the odds may greatly be in your favor.
Cheers and have a find weekend all, arrr
- Status
Similar threads
