Cloupor 30W Box Mod OWNERS thread

[Iceclouds]

Thanks for the info, but I don't appreciate vendor hiding behind the excuse of "at least" this just seems like poor stocking/ inventory control on their part. They should just say out of stock when the item is in stock and not when it isn't instead of me waiting on unspecified time in future when they will send the device


And reading people's experience here, it is not "at least" 1 week shipping it is on average closer to month shipping. Unless I am wrong and someone actually had item shipped within the 1 week. To justify it with saying with a twist of words, is really weak to me, they should just be more upfront on the situation.

I might as well take my chances with fast-tech with their time of shipping

As Fergie says, Wet Vapes is the way to go right now, yes you will pay 10.00 more but save a Ton of agrevation........I have no patience, got my first one from a friends B&M and paid 99.00 on the spot, got my second one from WetVapes for 79.99 with free shipping and got it in 3 days (working like a Champ) Raj is a nice guy and you can actually speak to him directly on the phone......These are not on Pre-Order anymore, it was OK for the vendos to take weeks when they were on Pre-Order now everyone has them so they should be able to get it to you within days from your order......IMO

 

[CurlyxCracker]

Does anyone know the screw size for the back cover? Searched this thread but did not see it posted.

Also tried a couple of local hardware stores but they don't carry anything that small, so I will need to order them but
don't know the size.

If anyone can help I would appreciated it.

Someone said they were 2.5mm in the other thread

 

[snackwitch]

As Fergie says, Wet Vapes is the way to go right now, yes you will pay 10.00 more but save a Ton of agrevation........I have no patience, got my first one from a friends B&M and paid 99.00 on the spot, got my second one from WetVapes for 79.99 with free shipping and got it in 3 days (working like a Champ) Raj is a nice guy and you can actually speak to him directly on the phone......These are not on Pre-Order anymore, it was OK for the vendos to take weeks when they were on Pre-Order now everyone has them so they should be able to get it to you within days from your order......IMO

Exactly. This is funny that people are saying that I am "bashing" elev8 vape but why do they see need to defend that site, is the owner your brother-in-law or something? This is supposed to be business, I don't care what the logistics is for the e-business, if they list an item in stock and they give you certain expectations of when to receive the item, I have every right to criticize them for it.

 

[Fergie]

Fergie, these seem like the "Usual Suspect" with a different custom......I know is not the same as the Hana/Cana/Anah/Chana and so on......what are these, cause they look very similar and with that small window it must be a DNA chip in there?

The iPV Box Mod packs the new SX330 Chip from YiHiCigar, which puts out a maximum of 50 watts!

http://www.elev8vape.com/ipv-50w-box-mod-by-pioneer4you/

 

[snackwitch]

The Cloupor and FT versions are not the same. And FT is also a "middleman" and does what is basically the same thing. Notice the "ships in" x" days"? They take orders for product they don't have yet... The choice is yours, do as you want, I just don't get why bash a company who's basically been the best "hands down" when it comes to the release of these clones.... Also to add Elev8 backs it for 60 days against manufacturer defect, wetvapes is 7days, FT is 6months with AT LEAST a month shipping (I have an order creeping up on 2 months now...)
Why don't you contact Arlind and see what's up with your order, he's very good with CS.

I understand that Cloupor clone is different then the fast-tech model.

I understand that fast-tech is middleman, I wasn't taking about fast-tech. Notice the IPV that elev8 vape is advertising? There was a link posted in another thread for the actual manufacturer in china and where you can order it directly. I would think if you are persistent enough, you could find the same for Cloupor clones. Basically it seems that for elev8 vape we are waiting for them to get it in stock from their supplier. This is no longer preorder so why don't they keep some stock at all times for selling?

 

[Fergie]

Exactly. This is funny that people are saying that I am "bashing" elev8 vape but why do they see need to defend that site, is the owner your brother-in-law or something? This is supposed to be business, I don't care what the logistics is for the e-business, if they list an item in stock and they give you certain expectations of when to receive the item, I have every right to criticize them for it.

Your choice, they've been good with me

 

[CurlyxCracker]

Exactly. This is funny that people are saying that I am "bashing" elev8 vape but why do they see need to defend that site, is the owner your brother-in-law or something? This is supposed to be business, I don't care what the logistics is for the e-business, if they list an item in stock and they give you certain expectations of when to receive the item, I have every right to criticize them for it.

Trust me, they'd get no praise if he was my brother in law. There's so many crappy businesses out there that take your cash and could care less afterward. They aren't listing it in stock. Yes the pre-orders may be over but there are still more people that go to elev8 to purchase the clone than anywhere else. And again they, just like elsewhere are limited by what cloupor sends them. But they'll still take your order and get it to you when they get it. Wetvapes will not. Wetvapes also sells/sold a fraction of what elev8 has. Your going to the most popular store for the most popular product and purchasing something THEY don't have in stock and giving them grief over something they cannot control. You're not entitled before the guy in front of you. And again no one forced you to purchase there. It's obvious that they're not in stock and you knew this by the "wait time a least a week" in the product description. Order from where it's in stock if you feel so entitled.

 

[Iceclouds]

The iPV Box Mod packs the new SX330 Chip from YiHiCigar, which puts out a maximum of 50 watts!

iPV 50w Box Mod by Pioneer4you - Elev8 Vape

Looks ok, I guess we are just going to continue going up, really in my book who needs more than 20-25 watts.....In my opinion anything higher than that and lower than .3 you are going to eventually blow yourself up, but that is just me.....50 watts....75 watts...100 watts and even 125 & 150 Really? for what....Meh!!!!

 

[roflwaffles]

30 watts on a .3-.5 build is lackluster IMO and you would be better off using a copper mod at that point, which creates the need for higher wattage devices. .35-.45 is my preferred on drippers and a DNA30 doesn't cut it at that resistance

 

[CurlyxCracker]

I understand that Cloupor clone is different then the fast-tech model.

I understand that fast-tech is middleman, I wasn't taking about fast-tech. Notice the IPV that elev8 vape is advertising? There was a link posted in another thread for the actual manufacturer in china and where you can order it directly. I would think if you are persistent enough, you could find the same for Cloupor clones. Basically it seems that for elev8 vape we are waiting for them to get it in stock from their supplier. This is no longer preorder so why don't they keep some stock at all times for selling?

I assumed because you mentioned Ft in an earlier post. And why not keep some to sell? Because I'd be pretty bothered if I ordered mine 2weeks ago and it wasn't shipped so it could be saved for someone who orders tomorrow.

 

[CurlyxCracker]

Your choice, they've been good with me

I think the level of communication elev8 had made me a return customer on its own. Not to mention answering questions within minutes of being asked via email. Who else during the release of these clones provided that amount of open communication? Nobody.

 

[CurlyxCracker]

Looks ok, I guess we are just going to continue going up, really in my book who needs more than 20-25 watts.....In my opinion anything higher than that and lower than .3 you are going to eventually blow yourself up, but that is just me.....50 watts....75 watts...100 watts and even 125 & 150 Really? for what....Meh!!!!

There's a 200w mod called "the beast" for $165. It's for cloud chasers.

 

[Fergie]

I think the level of communication elev8 had made me a return customer on its own. Not to mention answering questions within minutes of being asked via email. Who else during the release of these clones provided that amount of open communication? Nobody.

Yeah I couldn't get over how fast and accurate they were when I asked about anything. Definitely will shop there again.

 

[CurlyxCracker]

I understand that Cloupor clone is different then the fast-tech model.

I understand that fast-tech is middleman, I wasn't taking about fast-tech. Notice the IPV that elev8 vape is advertising? There was a link posted in another thread for the actual manufacturer in china and where you can order it directly. I would think if you are persistent enough, you could find the same for Cloupor clones. Basically it seems that for elev8 vape we are waiting for them to get it in stock from their supplier. This is no longer preorder so why don't they keep some stock at all times for selling?

Also, can you purchase these units one at a time or do you need to purchase a lot of say 10 of them? Sure you can order directly from coupon, but min order is 10. I imagine that's the way it is with basically every manufacturer you purchase directly from.

 

[snackwitch]

Trust me, they'd get no praise if he was my brother in law. There's so many crappy businesses out there that take your cash and could care less afterward. They aren't listing it in stock. Yes the pre-orders may be over but there are still more people that go to elev8 to purchase the clone than anywhere else. And again they, just like elsewhere are limited by what cloupor sends them. But they'll still take your order and get it to you when they get it. Wetvapes will not. Wetvapes also sells/sold a fraction of what elev8 has. Your going to the most popular store for the most popular product and purchasing something THEY don't have in stock and giving them grief over something they cannot control. You're not entitled before the guy in front of you. And again no one forced you to purchase there. It's obvious that they're not in stock and you knew this by the "wait time a least a week" in the product description. Order from where it's in stock if you feel so entitled.

What is your attitude malfunction man? I never said I was entitled over anyone else, so I'm confused om why you are lecturing me on my apparent sense of over entitlement. I'm saying that this item is no longer a preorder, why are they selling it like that and not making this clear on the page? I may have misunderstood the item description of whatever, but emailing customer service did not clear it up.

You can have your expectations fine. If that suits you that's fine for you. No need to get ants in your pants because I dont think this store is the greatest. People on this site are gushing over the fact that they sell the updated version like that is some major plus, because that is what the original supplier is selling.

 

[Fergie]

Time out

 

[oncebitten]

Or 101vape. They still have red & silver in stock right now. Quick shipping.

I happen to have one of each of those colors from 101vape

 

[ILoveNorCal]

The iPV Box Mod packs the new SX330 Chip from YiHiCigar, which puts out a maximum of 50 watts!

iPV 50w Box Mod by Pioneer4you - Elev8 Vape

I might see how people like them after the first shipment is out on the 15th. If they're any good, I may pick one up to keep my CANA mod company until the Gi2's come back around.

 

[ILoveNorCal]

There's a 200w mod called "the beast" for $165. It's for cloud chasers.

Do you have a link?


*update*
never mind, I found it.

 

[snackwitch]

I might see how people like them after the first shipment is out on the 15th. If they're any good, I may pick one up to keep my CANA mod company until the Gi2's come back around.

I have to admit the IPvs look kind of sexy, but I don't want to be the unit beta tester. I'd rather wait for it to be out for a couple months at least so we can find out if it has any issues