Eleaf Lemo II

[Vapenstein]

wish list for Lemo 2 v2:

shorten the chamber as much as you can that will still fit 3mm builds, enlarge the juice channels just a little, enlarge the air intake to flow a little more air, reduce the chimney as much as you can without reducing airflow. If this tank had those 4 little modifications it might be a nearly perfect single coil tank. Maybe I'm asking too much from a tank.

 

[Apathyzero535]

Just ordered mine last night. Pretty excited, I never owned the original so V2 seems like a good place to jump in.

 

[JoeVan]

Just ordered mine last night. Pretty excited, I never owned the original so V2 seems like a good place to jump in.

It will probably take some experimenting (took me a few days of messing with it to get the flavor pumping) but once you get you build and wicking right, it's a fantastic device. Don't give up on it too soon! I promise, it will be worth your while.

 

[ThunderDan]

It will probably take some experimenting (took me a few days of messing with it to get the flavor pumping) but once you get you build and wicking right, it's a fantastic device. Don't give up on it too soon! I promise, it will be worth your while.

I really wanted to like this one, but couldn't get used to the restrictive draw.

Any lemo 2 owners with a Squape R / clone? How is the draw on that one compared to lemo 2?

 

[Apathyzero535]

It will probably take some experimenting (took me a few days of messing with it to get the flavor pumping) but once you get you build and wicking right, it's a fantastic device. Don't give up on it too soon! I promise, it will be worth your while.

I'm gonna try the previously mentioned pancake method first I think haha. Especially as I use higher VG juices. But I won't! it looks like its to good to not work

 

[DiggleTree]

This is not my experience.

I vape only high or max-VG. After nearly every draw I can see 1-3 bubbles rising from the bottom. That tells me I have very good wicking.

Who knows after the next wicking I may be in the same boat as one of the 'complaing' reviwers.

I almost never get the bubbles unless I tilt it to the side or primer puff. I really want to love this tank but seems like I have to baby it.

26g 2.4mm coil spaced at .8ohms

 

[darknecrotic]

Coming from a KFL+ where 26 gauge was pushing it, really loving this thing. Currently running it with a twisted 28 gauge 2.5mm diameter. I don't pancake, I just cut flush with the top of the chamber, tuck and fluff. Juice her up and nudge the cotton a lil away from the juice channels and it works flawlessly.

Sucks to hear so many people are having issues.

 

[VaPreis]

I almost never get the bubbles unless I tilt it to the side or primer puff. I really want to love this tank but seems like I have to baby it.

26g 2.4mm coil spaced at .8ohms

Coil sounds good, but it sounds like your wicking is choking the liquid channels.

 

[VaPreis]

Coming from a KFL+ where 26 gauge was pushing it, really loving this thing. Currently running it with a twisted 28 gauge 2.5mm diameter. I don't pancake, I just cut flush with the top of the chamber, tuck and fluff. Juice her up and nudge the cotton a lil away from the juice channels and it works flawlessly.

Sucks to hear so many people are having issues.

I'm another lucky one. Both of mine work flawlessly also, wicked just as yours. I didn't actually think they would replace my original Lemo's, but they pretty much have. I'll probably pick up another before the local store runs out of them.

 

[Henry Etta]

I just ordered one tonight. I originally ordered a ST mini, but the shipping never got past "preshipment" and when, after 5 days, I finally checked my account on the website, it said they were back ordered.
I was waffling for a while anyway, and I think the Lemo might be a better fit for me. Haven't used a regulated/tank set-up since protanks first came out, so I'm looking forward to putting this on my SX mini!

 

[cdrice15]

I gave up on the lemo 2 and went back to my kt mini. I had dremeled the juice channels out on the rba for the subtank mini and had it wicking very good for my 100%vg juice. Never could get the wicking down for the lemo 2. So I just gave up.

 

[Haylon357]

I put a dual coil build in my Lemo. It vapes like a champ. No wicking issues at all. Imo, it wicks better than with a single coil build using higher vg juices. I don't own the Lemo 2 yet. So I don't know if there is room to even try this build.

Tapped from my LG G3

 

[ThunderDan]

Dremeling a notch in the barrel of the lemo 2 helps wick max VG I've heard. I would have tried that, but the airflow wasn't what I was expecting, so even if it could keep up with high VG that still wouldn't have fixed the restrictive airflow.

 

[Vapenstein]

Been vaping the 3mm twisted 28ga build since yesterday. The flavor just isn't what I'd hoped, but the Lemo 2 vapes well. I am just going to accept its shortcomings and keep vaping it. This gives me better performance in some areas than the Subtank Mini but it isn't the whole package. I ordered a Cthulhu, which I imagine will have its own set of compromises. Eventually a tank will come out that will do everything right, but in the meantime I guess I'll be living with three different tanks with three different sets of deficiencies.

pros
wicks better than an ST Mini
can handle more power, see above
really nice looking and feeling tank
top fill is nice
doesn't leak a drop, ever

cons
flavor is muted
airflow is no better than ST Mini
juice inlets could be bigger still
build deck is not as easy as ST Mini
can't access build without complete disassembly

tl;dr I'm not enthusiastic but IMO there's more to like about the Lemo 2 than there is to dislike and I'm keeping mine

 

[JoeVan]

I really wanted to like this one, but couldn't get used to the restrictive draw.

Get a Goblin. Best airflow in a rebuildable I've had.

I don't mind the draw of the Lemo 2, though. Plenty enough air for a good lung hit.

 

[ThunderDan]

Get a Goblin. Best airflow in a rebuildable I've had.

I don't mind the draw of the Lemo 2, though. Plenty enough air for a good lung hit.

Vaping on my goblin right now actually.

 

[mesamay2003]

I like the Goblin and the Lemo 2...building on the Lemo 2 is a little easier and roomier though...

 

[Canno]

I had a Lemo II on order. Three days before it arrived I dropped my black Lemo and broke the glass. The next day I dropped my silver Lemo and broke it. Had to go one day with one of my old clearomisers. I'm liking the Lemo II. I do have some tubes ordered for my Lemos. My wife just looks at me and shakes her head.

 

[Frenchfry1942]

I put a dual coil build in my Lemo. It vapes like a champ. No wicking issues at all. Imo, it wicks better than with a single coil build using higher vg juices. I don't own the Lemo 2 yet. So I don't know if there is room to even try this build.
View attachment 455177

Tapped from my LG G3

That is a neat looking build.

 

[Haylon357]

That is a neat looking build.

Thank you. It's a little time consuming. But imo the tank performs better. I'm wondering if the deck on the Lemo 2 has as much room for builds of this nature as the Lemo. Guess I will soon find out.

Tapped from my LG G3