- Status
Damascus is ordered!
There will only be 30 mjlonirs made with Damascus in 10 different color combinations.
These will be standard 18350 mjlonirs, due to the cost of the material they will be $200 each.
The engraving for the new mjlonirs will be done on the CNC. Which means better symbols, better definition, and more than 1 style.
We have begun work on the wood mjlonirs and we will have around 10 different exotic wood types for them. The wood mjolnirs will run $125 each and we should have around 100 pieces total. Future runs will be determined by the response we get from the upcoming batch.
Lead time on these will be 1-2 months, so get ready and save up. Once they are gone they may not come back again for quite a while.
There will only be 30 mjlonirs made with Damascus in 10 different color combinations.
These will be standard 18350 mjlonirs, due to the cost of the material they will be $200 each.
The engraving for the new mjlonirs will be done on the CNC. Which means better symbols, better definition, and more than 1 style.
We have begun work on the wood mjlonirs and we will have around 10 different exotic wood types for them. The wood mjolnirs will run $125 each and we should have around 100 pieces total. Future runs will be determined by the response we get from the upcoming batch.
Lead time on these will be 1-2 months, so get ready and save up. Once they are gone they may not come back again for quite a while.
Oh man, Im saving my sheckles for sure. The question is, do I get a Damascus and a new wood one 
Any chance you can snap a pic of the damascus as it comes in. Is it just a huge block? I absolutely cant wait for this. I think with 30 of them I should be able to get one. It may be a bit of a battle but then again maybe it wont. If everyone was me an F5 war would be declared! Lets hope it doesnt come to that.
Any chance you can snap a pic of the damascus as it comes in. Is it just a huge block? I absolutely cant wait for this. I think with 30 of them I should be able to get one. It may be a bit of a battle but then again maybe it wont. If everyone was me an F5 war would be declared! Lets hope it doesnt come to that.
Last edited:
a) Other than the flat switch are the Mjolnir the same as a standard pipe? Just making sure I "get" it.
b) What do you mean by color combinations? Assuming you mean different patternings due to the Damascus process but wondering if you mean something else?
c) Will you be doing the VV option for these?
a) Other than the flat switch are the Mjolnir the same as a standard pipe? Just making sure I "get" it.
b) What do you mean by color combinations? Assuming you mean different patternings due to the Damascus process but wondering if you mean something else?
c) Will you be doing the VV option for these?
They are the same concept just a different shape basically. Im also pretty sure there will be no VV. He likes to keep his mods fairly simple so they work consistently but I cant speak for matt. Just my guess
its 4 am in the f . . . ing morning i should be slee ping but i got home from work and said hey i will rebuild this killer i have, mind u this is my first time, and that was at 130 so as u can see things did not go well.. i wasnt aware after you tuck the one side in the hole the other side must make contact with the outer wall, well i became aware of this after tinkering. so after getting it to fire finally i am puffing and small clouds, all i hear from people is that they are puking clouds of major exhaust all over the freaking place, i check the ohms on my provari and it is saying 4.2............. 4.2 ???/ im gonna need 8 volts for that crap, then i realize this is a premade factory ceramics that u buy so i guess i forgot to unwind a few coils...... can some one please throw me some tricks or help im about to smash my face with a freaking framing hammer, those of you who dont know what that is it is a big ... hammer to just set the severity of my frustration.....
My best guess would be colored enamel in the engravings.
[I suppose one could anodize the outer portion of the switch in various colors, too...]
Last edited:
its 4 am in the f . . . ing morning i should be slee ping but i got home from work and said hey i will rebuild this killer i have, mind u this is my first time, and that was at 130 so as u can see things did not go well.. i wasnt aware after you tuck the one side in the hole the other side must make contact with the outer wall, well i became aware of this after tinkering. so after getting it to fire finally i am puffing and small clouds, all i hear from people is that they are puking clouds of major exhaust all over the freaking place, i check the ohms on my provari and it is saying 4.2............. 4.2 ???/ im gonna need 8 volts for that crap, then i realize this is a premade factory ceramics that u buy so i guess i forgot to unwind a few coils...... can some one please throw me some tricks or help im about to smash my face with a freaking framing hammer, those of you who dont know what that is it is a big ... hammer to just set the severity of my frustration.....
Please refrain from mentioning other vendors products as to not take away sales of the "hammers" sold by epipe mods
On another note I have no experience with the killer..... matt and dirq on the other hand...
Whatcha think about the new Zenesis "system"? While the main devices aren't really relevant here, his efforts at fixing the 510 connection are admirable. He's doing fully modular stuff, so any of the atomizers or tanks will screw directly onto the battery tube, like any hybrid. There's a 510 adapter available, too. But Zen is publicly releasing the thread specs and encouraging other to use them, in an effort to standardize a much beefier connection than the flimsy 510 that was primarily designed to fit within a supermini and pass air for auto switches.
While I can see how a larger connector might not work on the average pipe, it seems like a natural fit for the Mjolnir. It's a fantastic platform for genesis attys, anyhow, since the design is so stable when upright. I could see a special "Z Edition" hammer, maybe including a rebuildable tank and the 510 adapter...
While I can see how a larger connector might not work on the average pipe, it seems like a natural fit for the Mjolnir. It's a fantastic platform for genesis attys, anyhow, since the design is so stable when upright. I could see a special "Z Edition" hammer, maybe including a rebuildable tank and the 510 adapter...
a) Other than the flat switch are the Mjolnir the same as a standard pipe? Just making sure I "get" it.
b) What do you mean by color combinations? Assuming you mean different patternings due to the Damascus process but wondering if you mean something else?
c) Will you be doing the VV option for these?
colors of damascus and mokume....there are quite a few choices...
its 4 am in the f . . . ing morning i should be slee ping but i got home from work and said hey i will rebuild this killer i have, mind u this is my first time, and that was at 130 so as u can see things did not go well.. i wasnt aware after you tuck the one side in the hole the other side must make contact with the outer wall, well i became aware of this after tinkering. so after getting it to fire finally i am puffing and small clouds, all i hear from people is that they are puking clouds of major exhaust all over the freaking place, i check the ohms on my provari and it is saying 4.2............. 4.2 ???/ im gonna need 8 volts for that crap, then i realize this is a premade factory ceramics that u buy so i guess i forgot to unwind a few coils...... can some one please throw me some tricks or help im about to smash my face with a freaking framing hammer, those of you who dont know what that is it is a big ... hammer to just set the severity of my frustration.....
Ok. Ive never rebuilt my Killer. I sent it off on loan before I ever tried. How many coils do you have. Most likely you have a short somewhere. There must be a wire touching where it shouldnt. There is a Killer thread though and Im sure those people can walk you through it. The best way is to have videos or pictures of you build though. Plus look on youtube for a rebuild video. Last I checked I only saw the official one though. Good luck and let us know any tricks you learn.
I'm using my Killer now while I wait for my Pipe, here is a great video from Todd going through a rebuild of the coil.
The Killer 705 - YouTube
The Killer 705 - YouTube
its 4 am in the f . . . ing morning i should be slee ping but i got home from work and said hey i will rebuild this killer i have, mind u this is my first time, and that was at 130 so as u can see things did not go well.. i wasnt aware after you tuck the one side in the hole the other side must make contact with the outer wall, well i became aware of this after tinkering. so after getting it to fire finally i am puffing and small clouds, all i hear from people is that they are puking clouds of major exhaust all over the freaking place, i check the ohms on my provari and it is saying 4.2............. 4.2 ???/ im gonna need 8 volts for that crap, then i realize this is a premade factory ceramics that u buy so i guess i forgot to unwind a few coils...... can some one please throw me some tricks or help im about to smash my face with a freaking framing hammer, those of you who dont know what that is it is a big ... hammer to just set the severity of my frustration.....
The killer needs to use NR legs like Penelope wire. You can get it at clouds of vapor.
If you only use resistive wire without the legs the wire length will be too long and result in high ohms.
Any chance of a list for these? I'm sure it would be populated fast!
I wish we could but we just don't have the time to organize it. We are soooo busy it's scary some days... Ok most days.
- Status
Similar threads
- Locked
- Locked
