ERA - easy rebuildable atomzier

[Gioajack]

I've got two of 'em and use 'em everyday. I use to like 'em with Phiniac tanks but lately I've been really enjoying dripping into a FATTY V2. Very comparable to an ERA, (just easier to get), beautiful air control system and very easy to rebuild.

Jack

 

[pmoraldo]

Reonaut to the core here no silly tube mods for me

Sent while Hyper Vapin a Trippy Tipped Reo

 

[Gioajack]

Reonaut to the core here no silly tube mods for me

Sent while Hyper Vapin a Trippy Tipped Reo

Mods are like beautiful women... if God intended for us to be with just one He wouldn't have made so many of them.

(Of course mods do tend to be a whole lot cheaper.)


Jack

 

[kabonk]

I know, i know we don't need no stinken tubes

 

[Mudflap]

I think kanthal wire and SS mesh wicks are going to be my regular builds. They vape so nice and when the coils gunk up, I can dry burn them clean easily enough.

 

[MXBNW]

I like mine a lot. I have been running the one I built for a few weeks with no issues. I do have to juice the wick a bit more often but after you get use to it not an issue at all for me.

Thanks for the tip Mud

I think kanthal wire and SS mesh wicks are going to be my regular builds. They vape so nice and when the coils gunk up, I can dry burn them clean easily enough.

 

[Mudflap]

You're welcome sir, but I was just following the herd when I tried it.

 

[strprswpr]

Now you guys are gonna make me try SS wick???? I REALLY DON'T WANT TO!!!!

 

[MXBNW]

LOL I run both the SS wick and the Silica, I can not tell much difference in the flavor or over all production of the ERA. (That could just be me)

I do think that the wick set up will last longer then the Silica wick so it should work for a long term wick.

Like I said I have two weeks on the first set up and its going strong no change from when I first installed it. I am going to keep this set up on the Grand and see just how long I can get out of it before I need to change it out.

Now you guys are gonna make me try SS wick???? I REALLY DON'T WANT TO!!!!

 

[kabonk]

its not just you I have silica in one and ss in the other I can't tell the difference in the flavor ether

 

[Mudflap]

Now you guys are gonna make me try SS wick???? I REALLY DON'T WANT TO!!!!

Well, I had these lengths of rolled, oxidized, SS mesh laying about since they were too big in diameter to use with my G-Tank-US, so I said "what the hey?" and wrapped a coil, trimmed the wick to about 1/4", and installed it in my ERA. It vapes great!

 

[Pete54]

Ok, now I've got to try the SS wick as well! Anyone have a pic of their setup? I assume that you need to have one end of the SS wick touching the base??

 

[Mudflap]

Ok, now I've got to try the SS wick as well! Anyone have a pic of their setup? I assume that you need to have one end of the SS wick touching the base??

I've found it gets better as it "breaks in."

Edit: It doesn't have to touch the base. I just give my ERA a healthy squonk and e-liquid pools up underneath it and some of it gets soaked into the SS mesh wick. The rest gets sucked back down to the bottle when I release the pressure.

 

[Pete54]

Since the ERA feeds through the small holes in the center post, I don't see how it could be sucked back into the bottle. I'm going to try it and see how it works. I might try a hybrid setup with silica inside the mesh extending out one side. I would think that the silica wouldn't get gunked up if the coil was only touching the mesh.

 

[Mudflap]

Well, not every single drop, but the majority of it gets siphoned back to the bottle. I'm currently using a 50/50 blend. The coil is where the gunk accumulates over time.

 

[HzG8rGrl]

Thanks to Mamu's RAT mod and coil build, I am using XS-18 silica sleeve over my mesh for the ERA. I left the sleeve long on either side of the mesh in hopes of it holding excess juice from squonking. Been using for a day and it is working quite nicely. Time will tell.

 

[strprswpr]

I just got 5' of that XS-18....I'm gonna try that setup in my LavaGen

 

[HzG8rGrl]

I just got 5' of that XS-18....I'm gonna try that setup in my LavaGen

You're gonna love it-just saying

 

[hildicat]

Thanks to Mamu's RAT mod and coil build, I am using XS-18 silica sleeve over my mesh for the ERA. I left the sleeve long on either side of the mesh in hopes of it holding excess juice from squonking. Been using for a day and it is working quite nicely. Time will tell.

Any links to that coil method?

 

[Mudflap]

Interesting! As someone told me elsewhere: Pics or it didn't happen!