Imeo how are you changing your battery from the bottom or top? I find it from the bottom is harder because of the bottom cap with o-ring. From the top is very easy. What do you think?very glad to hear that tele. Congratulations for your new GG.
I really tried to give on esterigon more features that every other mod but make it in a very simple way so all customers will be pleased, Beginners and very advanced users too will not have any complaint I hope
Esterigon official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
I live Far away so shipping says that Esterigon will be at my door on Friday...That would be Saturday in Greece, since they are a day ahead.
Anyways, I found a new love for Mech mods. Surprisingly, my cotton wicks last just as long, or longer on a Mech, even with sub-ohm too. I thought I read that the amount of juice Telemachos can hold is a secret for now. Even with an unpolished Telemachos on a polished Esterigon. It looks so Awesome.
Anyways, I found a new love for Mech mods. Surprisingly, my cotton wicks last just as long, or longer on a Mech, even with sub-ohm too. I thought I read that the amount of juice Telemachos can hold is a secret for now. Even with an unpolished Telemachos on a polished Esterigon. It looks so Awesome.
Imeo , First impression of Esterigon :
Just how it came was performing even better then the well known front button mech mod i was using ( sold already
).
After vaping for awhile I disassembled completely Esterigon and just washed with warm water and mild soap.
dried everything carefully , applied just a little vaseline on o rings of spring loaded app.and cleaned all contacts , threading's with alcohol to eliminate all traces of body oil .
Assembled with penny v3 ( set at my personal usual choice at 2 ohm ) ,18350 AW imr batt. with the result of Non noticeable voltage drop !
Batt was lasting longer then usual . I checked the voltage of battery , because it was lasting longer then usual and reading was 3,40 V ! strange.. was still vaping fine.
Assemble and disassemble of all parts are very user friendly ( no tools needed )
Everything strait forward , no adjustments needed. all 510 connector attys will just work and sit flush to mod.
Air control works precisely
Button is soft, sweet and perfectly responsive .
locking function works like a charm.
Overall aesthetics and finish are excellent
In conclusion : I will highly recommend this mod to GG and non GG fans
Just how it came was performing even better then the well known front button mech mod i was using ( sold already
).After vaping for awhile I disassembled completely Esterigon and just washed with warm water and mild soap.
dried everything carefully , applied just a little vaseline on o rings of spring loaded app.and cleaned all contacts , threading's with alcohol to eliminate all traces of body oil .
Assembled with penny v3 ( set at my personal usual choice at 2 ohm ) ,18350 AW imr batt. with the result of Non noticeable voltage drop !
Batt was lasting longer then usual . I checked the voltage of battery , because it was lasting longer then usual and reading was 3,40 V ! strange.. was still vaping fine.
Assemble and disassemble of all parts are very user friendly ( no tools needed )
Everything strait forward , no adjustments needed. all 510 connector attys will just work and sit flush to mod.
Air control works precisely
Button is soft, sweet and perfectly responsive .
locking function works like a charm.
Overall aesthetics and finish are excellent
In conclusion : I will highly recommend this mod to GG and non GG fans
Aal , I was trying that too . I found much better changing from top and found that while screw and unscrew top cap , just push enough at the same time you screw or unscrew to help threading because of the spring pressure when batt. is in . I do it automatic already.
I tried as well taking out the fine o ring of the bottom cap. For me is even better , easier to work with , because you have to put vaseline on that o ring and threads of bottom cap are really short which makes it difficult to avoid vaseline to touch the threads . Once batt is in and all tight because of the strong springs ( which i really like more and more) , you still can perfectly lock and unlock the device with out the o ring and for sure bottom cap sits flush to body.
Last edited:
but it already has a 510, no? Or do you mean a base with it's own a/c?
the venting cap was made to stay in place and not be used for loading batteries aal. Esterigon was designed to load batteries unscrewing the button case
well....... just great JM!. Your post is "esterigon" style. Simple and brief at the same time
Imeo , First impression of Esterigon :
Just how it came was performing even better then the well known front button mech mod i was using ( sold already
After vaping for awhile I disassembled completely Esterigon and just washed with warm water and mild soap.
dried everything carefully , applied just a little vaseline on o rings of spring loaded app.and cleaned all contacts , threading's with alcohol to eliminate all traces of body oil .
Assembled with penny v3 ( set at my personal usual choice at 2 ohm ) ,18350 AW imr batt. with the result of Non noticeable voltage drop !
Batt was lasting longer then usual . I checked the voltage of battery , because it was lasting longer then usual and reading was 3,40 V ! strange.. was still vaping fine.
Assemble and disassemble of all parts are very user friendly ( no tools needed )
Everything strait forward , no adjustments needed. all 510 connector attys will just work and sit flush to mod.
Air control works precisely
Button is soft, sweet and perfectly responsive .
locking function works like a charm.
Overall aesthetics and finish are excellent
In conclusion : I will highly recommend this mod to GG and non GG fans
View attachment 347491
o-ring was put on venting cap to avoid complains from beginners JM. If you know what you do (screw always well the venting cap), o-ring is not needed
ahahaha, you found it river. Yes, an AD base for non GG users that will fit on every mod and it will not depend on mod for air. It will only be 4mm longer. Tilemahjos on that mode will be only 4mm longer even if the ring is a lot bigger
Thanks Imeo , Thats my most honest opinion . I could be more tech. explicit with all features , but no need at all . You did that already perfectly with video , before esterigon was even released and everything you showed on those video's are 100 % true ,plus the final aesthetics of the product is perfect.
almost nothing is shined in pics because Greek seller stolen almost all my parts leo
A/c is not shinned in pics???
not a bad option to call me Mr option River
Maybe better Imeoption?
Maybe better Imeoption?
I think a/c is as important as feed control, maybe even more important since it can affect the feeding too. So, nice option Imeo
I'm going to start calling you Mr. Option
Any plan/possibility for a top cap without air flow control? Something that would make the estirigon shorter on tanks with their own airflow system and drippers?
mon, what I managed to do on esterigon was to make a cap that:
even if it has air control and
totally screws without gaps on button case and
automatically adjustable center post
its shorter than regular caps. So there is no way for someone to make a smaller cap even if he removes all these functions.
But lets say that we remove all these functions and find a way to make it a little smaller. Then what will happen is this:
1. The cap will not screw totally on the button case
2. Cap will be very small and you will not be able to keep with your fingers and if it gets stuck on an atomizer you will not be able to remove it
3. it will not accept all atomizers because it will not have automatically adjustable pole
Cap is not at 7,5mm total. Lets say that we go at 4mm thats is the less we can do if we want to have a cap that we can grab it with our fingers (difficult already). So we will earn 3,5mm only and we will remove everything. Its not very logical as you see
even if it has air control and
totally screws without gaps on button case and
automatically adjustable center post
its shorter than regular caps. So there is no way for someone to make a smaller cap even if he removes all these functions.
But lets say that we remove all these functions and find a way to make it a little smaller. Then what will happen is this:
1. The cap will not screw totally on the button case
2. Cap will be very small and you will not be able to keep with your fingers and if it gets stuck on an atomizer you will not be able to remove it
3. it will not accept all atomizers because it will not have automatically adjustable pole
Cap is not at 7,5mm total. Lets say that we go at 4mm thats is the less we can do if we want to have a cap that we can grab it with our fingers (difficult already). So we will earn 3,5mm only and we will remove everything. Its not very logical as you see
I'm on holidays and will be able to play with my estirigon in 10 days only ... So I can't really realize all reasons you mentioned. But obviously you wondered about it and figured it wouldn't make sense. It's good enough answer for me right now I'm almost in a hurry to be back at office ... Well almost only ... Cheers
I'm almost in a hurry to be back at office ... Well almost only ... Cheers
Jajajaja.
Thats want i mean is that the ac is on Tilemahos side, no? No shined...
Then it's a hybrid connection with Esterigon without ac, right?
Beautiful again boss ;-)
Thats want i mean is that the ac is on Tilemahos side, no? No shined...
Then it's a hybrid connection with Esterigon without ac, right?
Beautiful again boss ;-)
almost nothing is shined in pics because Greek seller stolen almost all my parts leo
you are in a hurry to be back at office? And then you say that I am workaholic? lol
- Status
