Evolv-ing Thread

[kiba]

Also I have a sister who uses a radius with a kabuki, I have tried to get her onto a dna boarded device for tc but she's die hard provari and has 2 radii and a p3 or whatever the newest tube-like provari is. Just for science (I have nothing to measure coil temps with) I took one of her old nautilus coils, rebuilt it with some nife48 and ran it on one of mine at like 400F, & the wattage used was like, less than half of what she uses.

But yeah it doesn't sit well with me bc I got them started vaping.

Sent from my SM-G955U using Tapatalk

 

[awsum140]

Some morning coffee "porn" for Steamer -



That's the Big Fogger on the Dripp3D box mod. Yes, the ERM+ has an Aromamizer V2 with a Ti coil set. In the background is an old Istick30 with an old iClear on it that my wife uses sometimes.

 

[Steamer861]

I'm having the worst run of bad luck this week! It's just incredible how many things can go wrong Murphy is camped out on my site this week
I guess it started friday, Blew a hydraulic hose 300$ lost half a days work, Monday morning 450$ fines at the Scale (MTO) Tuesday lost tooth on the hoe didn't have any spares needed hole new set 565$ also broke a well tile 145$ lost half a day production, blew a rear tire today on the KW 300$ just replaces all drivers Friday so the tire that blew was 5 days old

Murphy Better F off soon or I will be broke!
The SMM atty came today Will try it later & give an opinion

 

[awsum140]

Murphy can be a real bummer, Steamer.

 

[Alexander Mundy]

This is also probably one of those "in my head" things

 

[mikepetro]

I'm having the worst run of bad luck this week! It's just incredible how many things can go wrong Murphy is camped out on my site this week
I guess it started friday, Blew a hydraulic hose 300$ lost half a days work, Monday morning 450$ fines at the Scale (MTO) Tuesday lost tooth on the hoe didn't have any spares needed hole new set 565$ also broke a well tile 145$ lost half a day production, blew a rear tire today on the KW 300$ just replaces all drivers Friday so the tire that blew was 5 days old

Murphy Better F off soon or I will be broke!
The SMM atty came today Will try it later & give an opinion

Sounds like Murphy AND his wife both camped out at your place.
Hope they get bored and move on.....
I bet they are squonkers!

 

[Steamer861]

I bet they are squonkers!

Squonkers aren't that Bad! Mike. Their nice Guy's & gals Who don't mind a bit of extra hassle
The news isn't all bad I got confirmation of a new big job close to home, should shorten my day by at least 4 hours, compared to the last months work
It was a real good month, so I can right off my looses! CRA can eat this month

 

[kiba]

There's also those who believe the obs engine nano is the best rta ever created by mortal hands or whatever, they aren't hard to find... are those people somehow less crazy than squankers? to each his own I say.

Sent from my SM-G955U using Tapatalk

 

[dwcraig1]

Sounds like Murphy AND his wife both camped out at your place.
Hope they get bored and move on.....
I bet they are squonkers!

More like a family reunion or something..........

 

[Steamer861]

SMM atty, To small for a big Clapton coil! IMO
I put a big Clapton coil in it put it on one of my bigger battery mods, looked stupid on there
The capacity can't be more than 3 mills, with a big performance coil it will need refilling way to often.
I put a simple round wire coil in it, about 3.5 mil diameter & raised it up high, so the air flow would get under the coil, not hitting it on the side.
I put it on my VT75 nano It looks good on there & is performing pretty well
The build quality is pretty good, nice smooth threading, deck screws have some nice girth
All in all pretty good LITTLE atty
Even with a simple round wire coil it's half empty in less than an hour

 

[tiburonfirst]

 

[SlickWilly]

Oiy, comparing RTAs to Squonkers to RDAs and which is best...

It's like arguing over firearms.

Did I hear gun chat!!!

 

[mikepetro]

 

[SlickWilly]

I'm having the worst run of bad luck this week! It's just incredible how many things can go wrong Murphy is camped out on my site this week
I guess it started friday, Blew a hydraulic hose 300$ lost half a days work, Monday morning 450$ fines at the Scale (MTO) Tuesday lost tooth on the hoe didn't have any spares needed hole new set 565$ also broke a well tile 145$ lost half a day production, blew a rear tire today on the KW 300$ just replaces all drivers Friday so the tire that blew was 5 days old

Murphy Better F off soon or I will be broke!
The SMM atty came today Will try it later & give an opinion

He's been hanging around here too, your right he better move on soon! Hired a painter to paint the outside of this big old house. It's been a nightmare since day one, and the lies since day one, OMG! Was supposed to be done by the 12th, now it's only half way done. Last Friday I overheard the workers complaining they haven't been paid, they were right outside the window of my den. I heard one of them say he's afraid he'll get screwed, he can't file a complaint because he's on disability and not suppose to be working, he's been 40 feet up on a ladder!!! I confronted them, they told me he was to pay them each day in cash and they only got $30 each so far for a week of work.... The other worker has his own contracting business and is subcontracting part of the job with the guy I hired, he said it's first and last time. I made this guy put in the contract any worker would be "fully covered" with insurance in case someone fell off a ladder and got hurt, that's how I lost my leg. Knowing I'll take a loss on the half down I gave him I had no choice but to boot him out of here and fire him, now he's threatening to sue me for breach of contract, dumb #$*. I think I worked out a deal with the subcontractor to finish the job, he said he'd be happy to help and at least he'll get some money for painting the house. The guy I hired hasn't been here more then six hours while the other two have done all the work. Meeting with my attorney today, need to get them retained so I can tell this jerk to stop calling and texting me, he can contact my lawyer if he needs to reach me. I already told him to never come back here again or I'll have him arrested for trespassing. The things he's said in the text's will only help me in court, he's not very bright. I just want to get the damn job finished, everything is a mess around here, it's not helping my blood pressure....

 

[cigatron]

make it so all the new mods have to come with a failsafe that doesn't let the coil go over 450F,

No way, do you know what you are asking for? Limiting the max temp on a mod to 450°f does nothing unless they remove adj tcr, adj tfr and wire type selection.
To truly ensure a user doesn't exceed 450°f at the coil would require a closed system mod/atty. I would quit vaping.

 

[mikepetro]

Sorry Willy.....

 

[mikepetro]

No way, do you know what you are asking for? Limiting the max temp on a mod to 450°f does nothing unless they remove adj tcr, adj tfr and wire type selection.
To truly ensure a user doesn't exceed 450°f at the coil would require a closed system mod/atty. I would quit vaping.

Or.......

A mod that could automatically determine the TCR. Which I think would be possible if someone put their mind to it.

Something like, put an exactly 5mm length (or whatever) of wire between the two terminals and select "Measure TCR" from the menu.

 

[tiburonfirst]

hang in there, willy! this too shall pass somehow

 

[SlickWilly]

No way, do you know what you are asking for? Limiting the max temp on a mod to 450°f does nothing unless they remove adj tcr, adj tfr and wire type selection.
To truly ensure a user doesn't exceed 450°f at the coil would require a closed system mod/atty. I would quit vaping.

Quit! Not me, I've got enough mods and boards to last me a very, very long time! Even though I rarely go above 450 there have been a few times I have and I wouldn't want a mod that limits me. I don't need the government to hold my hand, give me the information if they know of something harmful and I will decide how I live my life.

 

[SlickWilly]

hang in there, willy! this too shall pass somehow

That's the way my wife looks at things when there is trouble, she always says; a year from now this won't matter.