For what it's worth....
I have a pile now of the AGA-T2's most of which were from the SoulFree CoOp where we had the manufacturer drill these out for us to 1/8". They were a little under that, but quite close. My first delve into the ceramic with the AGA though was with one of the originals I bought at DV. I drilled that one out to 1/8.
After over a week, using 1/8" FC-2000 with 30awg and the EHW method, this thing is amazing. For cleaning, all I do between flavors is run it under water in the sink through fill hole, turn upside down and shake out water and repeat several times. This worked well for the last about 10 days, but today was too gunked up. So I dry burned it for a while to charcoal up the stuff, rinse, burn and then decided to use the Flavor Flush I bought for my drippers and burned that a few drops at a time. rinsed very well and refilled. Just like new. Have never has to rewrap a thing, yet, have a pile of 1/8 wicks still here, as I've only broken one by dropping a Zmax on it while it sat on the table.
Now I'm going to set up the other 5 the same way. No slotted wicks for me yet, but interesting to hear about that. Frankly, these are working great for me with my 50/50 mix at 1.3 ohms. Plenty of flavor and lots of vap.
Thanks to all those on this thread I've been reading now for the last 6-7 weeks for all the great information.