This is what I usually shoot for on all of my Gennies as well. 30 Guage and 1.5 to 1.8 ohms.
Genesis RBA on a ProVari
- Thread starter michaelsil1
- Start date
- th_trl_thread_readers 0
- Status
This is what I usually shoot for on all of my Gennies as well. 30 Guage and 1.5 to 1.8 ohms.
If you have a Micro Center around, they have them as well for filling ink cartridges for printers.
I have my dids set up for 1.2ohms using 30g 3/4 wraps. vaping at around 3.8. One of my builds is 1.1 right now, vaping at 3.7v
My favorite is 29guage 4/5 wrap. On the AC9 it's usually around 1.2-1.4ohm. I really like the 29g for
the provari because it responds really well/fast, easy to wrap, & so flavorful.
I don't really care for 28g on the prov, but love it on my poldiac. The 28 seems to lag a little when you
have to get the coils above 1.2ohms.
the provari because it responds really well/fast, easy to wrap, & so flavorful.
I don't really care for 28g on the prov, but love it on my poldiac. The 28 seems to lag a little when you
have to get the coils above 1.2ohms.
I finally got a syringe and emptied the tank. I got everything working perfectly all the coils glowing evenly, came in @1.5 Ohms set 3.5v and it is giving a tasty decent vape. I have to wait for the 500ss and 30awg to arrive then I 'll do it again and see if it gets any better.
Finally have my ProVari and am waiting on an AGA-T2 and an RSST. Mesh and wire will be here tomorrow. Can't wait to dig into RBA. Will be a challange but I think it won't be so bad with all the info here.
Everything was a lot smaller than I was expecting I had to get a pair of magnifying glasses.
I use a 4/5 28GA Kanthal wrap for around 1.0 ohms. Currently doing just fine on my ProVari @ 3.8V
I will probably be buying a magnifying glass also. Eyes arn't what they used to be. I have trouble coiling a wick now. Can't wait to see the RBA. I might be in for a real treat. LOL
My eyes aren't what they used to be either.
Your going to need both hands so I would suggest those reading glasses from your local Rite Aid or CVS I wanted something a little stronger than the 2.5 I found, but that was the highest they had.
for those of us who are still practicing trying to get it right, is there a place where you can buy prewrapped coils system? My first one came out perfect, now Im struggling.
Don't do two wraps of 32 , your vapour production suffers greatly. I would highly suggest trying twisted 32 instead. It halves the resistance so you get double the wraps with the same ohms and twice the surface area in the process.
http://youtu.be/H-_LFbQK778
my provari doesnt like any but 32awg. Got sick of dealing with it, moved on to mechanical mods. Provari do not get much play now that I got 3 wrap 30awg dialed. Twisted does work well if you want a harder th and vapor.
Finally found my sweet spot on the AGA T2. I have them dialed in with #500 SS mesh, 3/4 wrap w/30g Kanthal @ 1.3 ohms . . . Yes!
I had been playing with higher resistance coils and then realized that I like the vape with my lower initial set-up. I have had quite a bit of fun playing with these guys. This is definitely a hobby, which I am going to enjoy. When its time to change one of the coils out, I am going to try using SS wire rope.
A smoktech rsst and 2 IGO-Ls should be here, soon. Cannot not wait for those to show up and tinker some more.
- Andy . . . Challenge the day.
I had been playing with higher resistance coils and then realized that I like the vape with my lower initial set-up. I have had quite a bit of fun playing with these guys. This is definitely a hobby, which I am going to enjoy. When its time to change one of the coils out, I am going to try using SS wire rope.
A smoktech rsst and 2 IGO-Ls should be here, soon. Cannot not wait for those to show up and tinker some more.
- Andy . . . Challenge the day.
Check out this spread sheet for SS mesh sizes , its great.
https://docs.google.com/spreadsheet/lv?key=0Atm-i6EmP-hudG9XQ3ZHNXBNUndUaFFzZU1SdXhDeEE
https://docs.google.com/spreadsheet/lv?key=0Atm-i6EmP-hudG9XQ3ZHNXBNUndUaFFzZU1SdXhDeEE
I used a 1-1/2 x 3" piece. I rolled it up as tight, as I could. There is just the tiniest hole, which is visible in the center.
I pre-oxidized it prior to rolling and hit it with a torch again after rolling it.
- Andy . . . Embrace the day.
- Status
