GG compatibility & tips and tricks

[D Stanley Querfurth]

Here should be a thread for all users
that want to give or need helpfull information about the compatibility
of old and new GG devices and atty´s.
Feel free to spare Informations and ask about things you need to know,
somebody of our GG family will help for sure !!!
​

 

[D Stanley Querfurth]

I will first collect the info given in this thread and after a while, it wil sort it by different atty´s , mods !​

1. Collectors tank from GGTS and Just GG match perfectly,

so we can use just gg collectors tank on GGTS conector .​

2. Ithaka new Brass CR (maybe soon in Old brass and SS ) will fit on GGTS collectors tank, too.


3.If you have a GGTS Tube, you need 1 rethreater and 2 just GG extension sleeves

and a Just GG collectors tank, it will fit and make a perfect 18650 sold device ( no need for any kind of telescope)​

3.a.: GGTS Tube + Just GG telescope + Just GG extension sleeve (1 or 2) + GGTS connector +

GGTS or Just GG´s Collectors tank, will make a full funktional device .​

4.Penelope 1 & 2 have the same threads between Base and Body,

they are the compatible to the upper threads of Penelope v2 body ( but Penelope 1 has different threads on top of body). So it is possible to stack the Penelope v2 Body´s to get a looong Penelope V2, but you need a Drip tip with the diameter of about 9-9,2 mm to fit with the top cap orings and be able to use the Liquid control !​

4.1 Penelope V1 can be used with Penelope v2 Base . It will get more airflow,

4.2 Penelope V2 can be Used with Penelope V1 tube/top cap/Mouthpiece

(must take all 3 Penny v1 parts to work)​

5.Ithaka´s body can be stacked with Ithaka or Odyseus body parts and you can make it looong mode

by using the Ithaka Telescopic Mouthpiece or the Mouthpiece for Drip Tips (diameter of DT should be 9-9.2 mm to work with liquid control)
​

6.Ody drip mode mouthpiece will work with Penelope 1 & 2 Base + rebuildable Part.

It won't fit on original Ithaka,but it will fit on the ithaka new rebuildable Part.
​

7.Ithaka rebuildable can be used with Odysseus.

You need to add the Ithaka 510 base with it's airflow CR, because Ithaka rebuildable has a longer center pin. This way you can get air control on Ody tank and use a ody with ggts base on a mod with 510 connection.
​

8.Ithaka mouthpiece and Ody Mouthpiece are interchangeable,

because the threads on Ithaka and Ody rebuildable and and the diameter on the top caps (where mouthpiece comes outof atty´s) are the same.
Just look out if you have to get a longer or shorter Ithaka/Ody body , for that you have to add or take of bodyparts.​

8a.: Ithaka and Odysseus have the same threadsize for most parts.

You be able to combine body parts from both atty´s. only things different are:
--->1: rebuildable part ( Ithaka needs basic feeding ring/ ody works without--due the diameter of the bases)
--->2:top caps- Ithaka refilling cap only works with ithaka small cap, and ody refilling cap only works with oddy small mouthpiece cap !​

9.Ithaka can be used with Ody rebuildable part by

-->a: using the Ithaka basic feeding ring for only 1 slot, or none
-->b: or without Ithaka ggts base and basic feeding ring--->by adding Ody GGTS base or Ody 510 base only
​

10.UFS Connector can be used instead of a GGTS Connector+Adapter


11.You be able to combine Solid Brass 18650 Tube with a Stealth Cap

and a GGTS Bottom Cap with Fuse.- it fits batteries like a charm.​

12.The Ody base drip mode will work with Ody rebuildable !

Ithaka old rebuildable does fit in Ody Drip mode base,but the center pin is to long, so you can´t connect it to your mod !!!​

13. Just GG list of parts to build one from spares

-1. Just GG O-rings
-2. Just GG SS Venting Cap Full
-3. Just GG Engraved Tube
-4. GGTS Button With SS or Brass Head
-5. Just GG Telescope
-6. 2x Just GG Extension Sleeve
-7. Just GG Full AD Cap With CR

If there is no 2. Just GG SS Venting Cap Full, you have to buy these parts to make one: 
-8. Just GG SS Venting Cap
-9. Just GG Axis's Black Plastic
-10. Just GG Brass Axis's Spring Holder
-11. Just GG Battery Spring
-12. Just GG Brass Axis's Moving Brass Pin
-13. Just GG Brass Axis's Moving Brass Pin
-14. Just GG Brass Axis
-15. Just GG Axis's SS Cover's Plastic
-16. Just GG Axis's SS Cover

If there is no 7. Just GG Full AD Cap With CR you need these parts:-
-17. Just GG Collector Tank's Brass Center Pin Full (with plastic and O-rins)
-18. Just GG Collector Tank
-19. Just GG CR
-20. Just GG SS Lid Full

And if there is no 17. Just GG Collector Tank's Brass Center Pin Full (with plastic and O-rins) you have to get these parts too: -->

-21. Just GG Collector Tank's Brass Center Pin'...
-22. Just GG Collector Tank's Brass Threaded Center Pin
-23. Just GG Collector Tank's Brass Center Pin

And if there is no 20. Just GG Lid Full you have to get these parts: -->

-24. Just GG SS Lid
-25. Just GG Lid's Brass Center Pin​

14. GGTS collectors tank/native connection can be used with 510 conection atty,

if you use the Just GG Lid Full, it will work perfectly !!!​

​

​

15. One more trick for people that cant find bodies or engraved tubes or windows for Ithaka.

You can build a whole tube and at exactly the length you want by putting upper bodies together.

16. penny 2 Body & short Body and penny 1 base are compatible.

17. UFS pin will work inside GGTS connector , but it will make the GGTS longer.
GGTS pin won´t work in USF, because it won´t reach the atomiser


19. You can use Odysseues Rebuildable inside Penelope V3. It will work perfect, because the center post fits the base 100 %.
All you need is:
1. Penelope V3 Base + Body + Cap+ Mouthpiece
2. Odysseus Rebuildable
3. Odysseus Upper Connection Nut Drip Mode (optional)


20. You can use Ithaka´s Rebuildable inside Penelope V3. You will need the Just GG Lid (without Just GG Lid's Brass Center Pin), because
Ithaka´s center post will be inside the Lid instead.

All you need is:
1. Penelope V3 Base + Body + Cap+ Mouthpiece
2. Ithaka Rebuildable
3. Just GG Lid (without Just GG Lid's Brass Center Pin)
4. Odysseus Upper Connection Nut Drip Mode (optional)

 

[imeothanasis]

great thread Stan!!! Thanks a lot for opening it. Now all GG compatibility info will be in one place

 

[mitchob123]

Glad theres a thread for this, will ithaka old rebuildable work with ody drip base/cap?

 

[tobarger]

I know the Ody drip mode mouthpiece works with Penelope V1, not sure about V2
I also know the Ody drip mode mouthpiece will screw onto the Ithaka new rebuildable part
But it will not work with the Ithaka original ceramic rebuildable part

 

[mitchob123]

I know the Ody drip mode mouthpiece works with Penelope V1, not sure about V2
I also know the Ody drip mode mouthpiece will screw onto the Ithaka new rebuildable part
But it will not work with the Ithaka original ceramic rebuildable part

Okay, thank you

 

[D Stanley Querfurth]

thx tobarger, good job !!!

 

[Itshak]

Glad theres a thread for this, will ithaka old rebuildable work with ody drip base/cap?

I think you will need this Ody base drip mode:

THE GOLDEN GREEK MODS :: Odysseus Accessories :: Odysseus Base 510 Drip Mode - e-smokeguru

if u fit Ithaka old atty inside you can screw the ody drip cap on!

(the inside threads are the same for Ody atty and old Ithaka atty)

sorry michob123 it's not the best solution after all,
as you need to cut the center post of Ithaka as it's too long.

new edit:
if one looking for GG dripper most easy way to go now will be just adding
the new dripp mode kit,to the tank you allready have.

 

[D Stanley Querfurth]

I think you will need this Ody base drip mode:

THE GOLDEN GREEK MODS :: Odysseus Accessories :: Odysseus Base 510 Drip Mode - e-smokeguru

if u fit Ithaka old atty inside you can screw the ody drip cap on!

(the inside threads are the same for Ody atty and old Ithaka atty)

Are you Sure Itshak ? have you got one ? can anyone who ha sthis part confirm that ??? Looks like penny v2 base to me !

 

[Aal_]

Are you Sure Itshak ? have you got one ? can anyone who ha sthis part confirm that ??? Looks like penny v2 base to me !

ithaka pin too long

 

[D Stanley Querfurth]

ithaka pin too long

thx aal,

the Ody base drip mode will only work with Ody rebuildable, if you use Ithaka rebuildable ( we don´t know yet if the threads match !!! ), the center pin will be looking outoff the base ( if you want to do so i suggest you use a ggts connector to compensate, no garanties given !!!)

stan

 

[steliosss]

For some reason, Ithaka old rebuildable does NOT fit in Ody Drip mode base!
Not the same threads.
I checked it with several bases.

EDIT: Νο...invalid information!!!
I just check it again with another Ihaka's rebuildable!!!
The previous must been faulty

 

[Itshak]

ithaka pin too long

correct thx for add!

but it will work fine if post cut a bit shorter.( I should have added though)

 

[steliosss]

Guys.... read my previous post please!

ΕDIT: Νο...invalid information!!!
I just check it again with another Ihaka's rebuildable!!!
The previous must been faulty

 

[Itshak]

well I see now stelioss I was writing before I so it.

but how come????
Ithaka atty fit fine in ody GGTS base.
how can this drip base have diffrenet threads??

 

[steliosss]

I don't know Itshak.. It stuck in the first turn. It's seems weird but it's a fact.
If you have an Ody drip base, try it and you'll see

ΕDIT: Νο...invalid information!!!
I just check it again with another Ihaka's rebuildable!!!
The previous must been faulty

 

[Aal_]

For some reason, Ithaka old rebuildable does NOT fit in Ody Drip mode base!
Not the same threads.
I checked it with several bases.

I will try it today. That's really wierd!

 

[D Stanley Querfurth]

I don't know Itshak.. It stuck in the first turn. It's seems weird but it's a fact.
If you have an Ody drip base, try it and you'll see

i am suggesting we work such things out together like we did, thx for that !

to ceep us from sharing ideas that will not work, i suggest we only give Information about parts that we have tested/ build, or that we ask members who have that parts to tri it out.


my thx to itshak, aal and steliosss !!!!

stan

p.s.: aal would be nice if you ceep us posted if it wors with your parts,lol.

 

[Itshak]

can it be do to ceramic??

I had ceramic that was so in Ithaka and I fix it very simple.
a bit of abressive.

but I don't see real technical reason for it not to fit
as the threads on this base and Ody GGTS base must be the same no?

but if you insist you must know better.

 

[D Stanley Querfurth]

can it be do to ceramic??

I had ceramic that was so in Ithaka and I fix it very simple.
a bit of abressive.

but I don't see real technical reason for it not to fit
as the threads on this base and Ody GGTS base must be the same no?

but if you insist you must know better.

i do not have the parts to try it out, but should be interesting what aal will tell us later today !!!