aaaaaaaaaxxxxxxxxxxxxxxaaaaaaaaaaaaaaaa
yes, but I wrote more things than you in my post!!
yes, but I wrote more things than you in my post!!
GG compatibility & tips and tricks
- Thread starter D Stanley Querfurth
- Start date
- th_trl_thread_readers 0
- Status
aaaaaaaaaxxxxxxxxxxxxxxaaaaaaaaaaaaaaaa
yes, but I wrote more things than you in my post!!
Jajajajajajajajajaja
Imeo.. would you concider making a shorter center post for the Ithaka to allow the Ithaka original rebuildable part to be used in Penelope v3 Body? I for one would love to see this..
If you already have a JustGG, you only need a stealth cap
THE GOLDEN GREEK MODS :: Stealth Accessories :: GG Stealth Connector Steel Full NEW (with center pin and plastic) - Esmokeguru
I found the post I made a few months ago with a picture of Just GG + Stealth cap.
http://www.e-cigarette-forum.com/forum/gg/442942-just-gg-429.html#post12297401
not a bad idea at all Big. Be sure that after esterigon and proteus we can make anything you like
Ok Imeo after Proteus and Esterigon.......we need a new liquidcontrol ring for ithaka... too to fit with penelope v2 rebuildable.....
thats one more nice idea Stan. Ok, write them in a new thread and when time comes we can make them. That way we will not forget them.
I will update your first post often so all ideas will be on this post
I will update your first post often so all ideas will be on this post
all closed /solid gg´s with18650 batteries
1.GGTS engraved Tube with a reathreater is as long as a Just GG Tube
2.GGTS Tube + GGTS Sleeve + rethreater with stealth cap will work for 18650 batt.
3.GGTS Tube + 2 Just GG sleeves + rethreater will work with 18650
4.GGTS tube + 3 Just GG sleeves + 4in1 cap will work perfectly with 18650 batt.
one more option :
5. SS/new Brass -> GGTS with 18650 batterie -> Tube + GGTS Sleeve+ Rethreader+ GGTS FULL AD CAP + GGTS Connector 801 - 510 (inside)
with Penelope V2
5. SS/new Brass -> GGTS with 18650 batterie -> Tube + GGTS Sleeve+ Rethreader+ GGTS FULL AD CAP + GGTS Connector 801 - 510 (inside)
with Penelope V2
Last edited:
May I suggest 19 Bis?
Or - if you prefere - a corollary of 19:
You may use Penelope 3 Rebuildable inside Odysseus.
This way you may build the Ody's equivalent of Ithaka upgrade, or - again, if you prefere - a much better solution than Kayfun transformation kit.
May I suggest 19 Bis?
Or - if you prefere - a corollary of 19:
You may use Penelope 3 Rebuildable inside Odysseus.
This way you may build the Ody's equivalent of Ithaka upgrade, or - again, if you prefere - a much better solution than Kayfun transformation kit.
well done Marco well done !!!!!!!
May I suggest 19 Bis?
Or - if you prefere - a corollary of 19:
You may use Penelope 3 Rebuildable inside Odysseus.
This way you may build the Ody's equivalent of Ithaka upgrade, or - again, if you prefere - a much better solution than Kayfun transformation kit.
just great
Just came and try this great Idea that Marco post.
Ok I checked now.
Though it's better to take Penny V3 rebuildble o ring out,
The wide one that fit on top of base (no reasone for this) then it will screw better to the ody base.
That's becouse the Ody base is threaded from the inside all the way up, not like Penny v3 base.
Also I change brass center post of Penny v3 to the Ithaka update like so:
[/url]
It will work with the Penny V3 mp
Thanks Marco so one can have Update Ody now if he wants.
And Ody atty can go into the Penny V3 (that's also in the picture)base as well,but we need the Penny v3 mp for this.
Ok I checked now.
Though it's better to take Penny V3 rebuildble o ring out,
The wide one that fit on top of base (no reasone for this) then it will screw better to the ody base.
That's becouse the Ody base is threaded from the inside all the way up, not like Penny v3 base.
Also I change brass center post of Penny v3 to the Ithaka update like so:
It will work with the Penny V3 mp
Thanks Marco so one can have Update Ody now if he wants.
And Ody atty can go into the Penny V3 (that's also in the picture)base as well,but we need the Penny v3 mp for this.
Thank you guys, but I only made a very simple tought:
if we can put Ody's rebuildable inside P3 - as previously noted by Stan - we may put P3 rebuildable inside Ody, too!
if we can put Ody's rebuildable inside P3 - as previously noted by Stan - we may put P3 rebuildable inside Ody, too!
just great Its! I never tried it but I will
Thanks Otello
Vasilis can put such ready update kits for Ody users
Ok I found one fault,and a way to fix it so this will work:
3 small o rings are needed on brass center post to avoid leaking.
That's becouse the rebuildable part have a bump that not let it screw all the way
On the Ody GGTS base.
[/url]
So 3 o rings one should use if he want to work it,
Otherwise juice will leak.
3 small o rings are needed on brass center post to avoid leaking.
That's becouse the rebuildable part have a bump that not let it screw all the way
On the Ody GGTS base.
So 3 o rings one should use if he want to work it,
Otherwise juice will leak.
Sorry guys I'm not understanding anything from what just happened. Can someone explain to me what we are trying to do? Is it possible to make Ody, penny v1 into R only wire? What is needed?
Sent from my SM-N9005 using Tapatalk
Sent from my SM-N9005 using Tapatalk
- Status
