GG compatibility & tips and tricks
- Thread starter D Stanley Querfurth
- Start date
- th_trl_thread_readers 0
- Status
Yes, I just screwed Iatty's tank on T.2/21 base. 
I'm not sure it's going to work, we get AD, but - because the way Iatty drip tip is made - we lose the liquid control...
maybe we'd need a Junction between moutpiece and drip tip, too.
I'm not sure it's going to work, we get AD, but - because the way Iatty drip tip is made - we lose the liquid control...
maybe we'd need a Junction between moutpiece and drip tip, too.
Well, I really cannot see a good reason for this build, unless:
- you have a spare Tilemahos 1 base without AD after installing the hybrid base on Esterigon,
- you really cannot stand a double AD ring,
- you're waiting for the T.22 base without AD in preorder
- and you need something to use in the meantime.
But, ehi! I DO have a spare T1 base, I really cannot stand a double AD ring, I have a T.22 base in preorder and I need something to use in the meantime!
Bottom line: Tilemahos bases and tanks may be mixed regardless of the diametre: they all have the same 19x0,5 threads.
- you have a spare Tilemahos 1 base without AD after installing the hybrid base on Esterigon,
- you really cannot stand a double AD ring,
- you're waiting for the T.22 base without AD in preorder
- and you need something to use in the meantime.
But, ehi! I DO have a spare T1 base, I really cannot stand a double AD ring, I have a T.22 base in preorder and I need something to use in the meantime!
Bottom line: Tilemahos bases and tanks may be mixed regardless of the diametre: they all have the same 19x0,5 threads.
Otello, when you were a kid you liked to play with puzzles and lego like Stan liked??? 
Because these were my games too lol
Because these were my games too lol
ahahaha, thats great Otello! I didnt know about meccano but I google it just now and they are great games. Maybe its time for us to start again playing lol
So if I got this right from the photos you can attach base of Tilemahos V1 to Tilemahos V2 22mm ? If yes, that's good to know.
Tilemahos V1 and V2 are compatible Seek. The only you have to know is that some parts have to go together. For example, base of V2 fits on V1 and the opposite. But when you buy the base you have to buy the AD ring too
Last edited:
Imeo, are the only real differences (other than the various sized tanks, bases and AC rings) between V1 and V2?:
1. Tank (bigger hole for bigger top cap)
2. Top Cap (bigger hole for bigger mouthpiece diameter)
3. Mouthpiece (larger diameter)
4. Center Pin (adjustable)
1. Tank (bigger hole for bigger top cap)
2. Top Cap (bigger hole for bigger mouthpiece diameter)
3. Mouthpiece (larger diameter)
4. Center Pin (adjustable)
Last edited:
and that there are not cuts inside the top cap Random. Also a different base and AD ring (o-rings around neck of the base and not inside the AD ring. And the cuts on housing are different
Last edited:
LOL!!! I just took the caps off a V1 and V2, and saw those cuts. Never noticed them before! What was their purpose?
Also, since I have a couple V1s with Esterigon bases, I could get a V2 tank, top cap, and mouthpiece, and essentially have a V2 on my Esterigon?
Also, since I have a couple V1s with Esterigon bases, I could get a V2 tank, top cap, and mouthpiece, and essentially have a V2 on my Esterigon?
Last edited:
these cuts where there to avoid pressure to the liquid when you close the cap Random. That way we didnt overflood atomizer. But they were not necessary finally because Tilemahos doesnt get overflooded.
If you do those changes you will not exactly have a V2. You need the new AD pin and the new housing too
If you do those changes you will not exactly have a V2. You need the new AD pin and the new housing too
Last edited:
Well, I'd really like to avoid a double AD ring, and I really like the larger opening on the V2. I think it makes the juice control easier to use, and doesn't get bound up as much. Are you thinking about making Proteus (and VIR) a sealed system without AD? I for one thinks that would be a really good idea. Any AD on an electronic device seems to be a recipe for damage, either by liquid getting to the electronics, or me being clumsy when trying to clean it.
AD cap is not bad for the electronics because Proteus is sealed anyway Random. The only you have to take care off is when you clean the cap. Please wipe very well all its pieces. Also keep the rest of Proteus in a safe place, away from dirt and liquids until you put its cap back on
........After proteus release, you can "stick" some tips in a thread for cleaning Proteus parts safely!!
Good day everyone have just bought my first GG! Have chosen one of the new stealths. Have just been doing a bit of reading up and I was hoping someone can help me with something. From what I can tell the new stealths have changed and no longer have a rethreader. So does this mean they are no longer able to be used with a telescopic tube? Would really like to make it Tele if I can.
have just bought my first GG! Have chosen one of the new stealths. Have just been doing a bit of reading up and I was hoping someone can help me with something. From what I can tell the new stealths have changed and no longer have a rethreader. So does this mean they are no longer able to be used with a telescopic tube? Would really like to make it Tele if I can.
As far as I know you cannot use a telescope. But you can buy just gg extensions to be able to use 18500 and 18650 batteries.Good day everyone
Just chiming in to say I LOVED LEGO in my youth, and when I play with mixes of The GG parts it brings me the same joy.
- Status
