Status
Not open for further replies.

wegster

Ultra Member
ECF Veteran
  • May 10, 2009
    1,324
    14
    NC
    Scott, during the weekend, if the manager phone you to come back to solve a serious problem that appears?
    Tell him please that "a Greek friend of mine told me to say to you that you are an ungly bast..rd":lol::lol:

    If he tells you anything, please tell him that you love him but these words are from the Greek man, not from you.:D:D

    :lol: Actually, I kinda self-manage, plus a small group. Every now and then a problem is found 'from outside,' but usually it's me who spots it and fixes it, then a while later, an email - 'someone said this had broken.' I usually give full info, but every now and then, I'm so tempted to say, 'Have you *looked* at it? Is it broken now? Dunno what you're talking about!' :D

    But, I *will* remember the 'send him greek greetings' for a special occasion! :D
     

    imeothanasis

    Unregistered Supplier
    ECF Veteran
    Feb 13, 2009
    47,882
    34,510
    Athens, Hellas
    gg-goldengreek.com
    :lol: Actually, I kinda self-manage, plus a small group. Every now and then a problem is found 'from outside,' but usually it's me who spots it and fixes it, then a while later, an email - 'someone said this had broken.' I usually give full info, but every now and then, I'm so tempted to say, 'Have you *looked* at it? Is it broken now? Dunno what you're talking about!' :D

    But, I *will* remember the 'send him greek greetings' for a special occasion! :D

    When this special occasion occurs, please inform me, I will laugh for 2 days:lol::lol::lol:
     

    EDO

    Ultra Member
    ECF Veteran
    Verified Member
    Feb 15, 2009
    1,538
    502
    Edo, I ensure you that the liquid has better taste at 6 volts. 6v devices dont burn the liquid or the taste. It happens just the opposite. The taste is icreased to a maximum degree.

    The more the volts, the more the taste. (exept throat kick and smoke that are increased). I am totally sure that people with a 5v device have not taste an 6v device. If they have taste both and they are honest they will admit what I say.

    Ask cosisan to see his opinion. He is a veeeeeery serious man and he will tell you the whole truth.

    To see what is happening on this forum, you will see people saying that 3,7v tastes better than 6 volts. What a lie. To my opinion, 3,7 volts have no taste at all if you smoke them side by side.

    Imeo,

    I believe you that you prefer the 6v better. But there are so many factors here. People are using different types of attys and they are using different types of liquids and then some people like a lot of throat hit some people might find the 6v too harsh etc.


    I am just telling you that most of the modders that have made both type of devices prefer their 5v device better. Most of these same guys first made a 6v device and they felt a need to bring the voltage down. Thats when they added a resistor to make a 5v device.

    I like Corsican and I trust his reviews....I definitely agree with you there. He likes to use his 5v device with his 901s. He won't use the GG with 901 since he killed 15 attys with a 6v LightVaper in a month.

    What is great is that you're trying to please everyone and that your trying to make a resistor disk for the trasnformer. This way the transformer will be a 4v, 6v, and 5v in one device.
     

    imeothanasis

    Unregistered Supplier
    ECF Veteran
    Feb 13, 2009
    47,882
    34,510
    Athens, Hellas
    gg-goldengreek.com
    Thank you very much edo for this reply.

    I want to tell about my 2 last days, the worst in my GG life!

    On thursday I gave to a friend of mine 10 Trans to make it because I hade no time. The result was that the button's hole was 2mm out of place. When I saw them I almost tried to kill him. Many people here are waiting for the Trans and I disapointed them. Today first thing in the morning I went to lathe to make 10 new GGs again. I finished 1 hour ago and I came home to assemble them. Sudenly I realise thqat my tools were in the lathe. I really get angry because I will not asseble anything on w/k.

    So on Monday I will assemble them and I will send them to the guys that purchased them.

    I was trying also to make the button in a way that you dont have to hold its base to secure it, so the button is better than ever.
    I also look at the auto feedind system. Thnis will be finished in 10-15 days because I made some changes for better performance.

    At the end I looked for the 5v solution (I dont prefer it at all) and I thought of something very simple. I made a little cylinder with 2 caps front and behind, with 2 holes in every cap. Inside I will close a little resistor and his wires will come out of the cylinder's holes. These wires will touch the negative of one pole and the positive of the other pole of the batteries. To explain it in simple words, this cylinder will go between batteries and thats it.:thumb:.

    I was waiting the w/k for rest but NO REST AGAIN!!!:evil:
     

    Di

    ECF Guru
    ECF Veteran
    Oct 30, 2008
    10,164
    16
    *Australia*
    Sakis ,sorry to hear of your bad luck. Enjoy your weekend and worry about it come Monday. Do not want our creator all stress out.
    Stress can kill a person and make them MEAN.
    Everyone can wait. Me including


    Take notice of this post Sakiss ------

    you and your health and wellbeing is far more important
    than having GG's a few days earlier------
    take your rest, ease your mind,
    we can all wait a few days so you can have your rest
    and keep your good health, and good humour.............:thumb:
     

    frogbmth

    Ultra Member
    ECF Veteran
    Feb 8, 2009
    1,239
    4
    Dorset, UK
    www.jantyclub.com
    Thats freakin awesome :thumbs:

    Time to fly the flag in thanks

    greek_flag.jpg
     

    rejoice

    Ultra Member
    ECF Veteran
    Dec 30, 2008
    1,792
    6
    USA KY
    Nice button and would really good on my GG grant. Needed it today.
    I learn a lesson today and that is do not put down GG with the button touching.
    I didn't know it was,but for now on I will watch it.

    No harm done. My GG is strong as a rock. Have not lost one atomizer using it.
    I know I will but, I have had GG for a long while.
     

    imeothanasis

    Unregistered Supplier
    ECF Veteran
    Feb 13, 2009
    47,882
    34,510
    Athens, Hellas
    gg-goldengreek.com
    Nice button and would really good on my GG grant. Needed it today.
    I learn a lesson today and that is do not put down GG with the button touching.
    I didn't know it was,but for now on I will watch it.

    No harm done. My GG is strong as a rock. Have not lost one atomizer using it.
    I know I will but, I have had GG for a long while.

    You just know how to treat it Rejoice, nothing else:thumb:. As an old to this forum you have learn and smoke many "big boys". You opinion is always very helpful (you know that already I think:D)
     

    EDO

    Ultra Member
    ECF Veteran
    Verified Member
    Feb 15, 2009
    1,538
    502
    I was trying also to make the button in a way that you dont have to hold its base to secure it, so the button is better than ever.

    At the end I looked for the 5v solution (I dont prefer it at all) and I thought of something very simple. I made a little cylinder with 2 caps front and behind, with 2 holes in every cap. Inside I will close a little resistor and his wires will come out of the cylinder's holes. These wires will touch the negative of one pole and the positive of the other pole of the batteries. To explain it in simple words, this cylinder will go between batteries and thats it.:thumb:.

    I was waiting the w/k for rest but NO REST AGAIN!!!:evil:


    Hi Imeo,

    Man, you work very fast....I like the new button a lot...very cool. I like your resistor idea....I am sure that Wegster will be very happy. To be honest I like the option of having a 5v device as well....it is always good to have options. Great Job.:thumb::thumb:
     
    Status
    Not open for further replies.

    Users who are viewing this thread