GotVapes.com GRAND OPENING! NOW!! FLüXomizer Clear CE2 Cartomizers Have Arrived - Incredible Pricing for ECF Members!

Status
Not open for further replies.

dannoman

Unregistered Supplier
ECF Veteran
Oct 22, 2010
6,896
12,330
Sugar Land, Texas USA
Hi Jonesy we have this in stock actually...

can you give me more info on this item please
volt510.png
 

harmonic

Vaping Master
ECF Veteran
Verified Member
Mar 20, 2011
5,157
11,413
49
Desoto, Mo
I'm not sure thats reading the voltage drop just sounds like lower reading as the battery goes down. I have tested lots of my batteries in unregulated box mod and there is always more than a .1 drop when its fired. If the VOLT was a regulated pv then it would always show the same voltage so since it does not it must not be regulated. It sounds kinda like a unregulated 14500 or 10440 (I not know the size of it) with a volt meter when atty off inside a fancy candy shell. Melts in your mouth not in your hand.
I don't have the pleasure of owning one of these fancy shiny things so I could mostly be talking out my ..... ;)
:vapor:
 

pineappledan

Super Member
ECF Veteran
Verified Member
Feb 20, 2011
774
403
Dartmouth
I'm not sure thats reading the voltage drop just sounds like lower reading as the battery goes down. I have tested lots of my batteries in unregulated box mod and there is always more than a .1 drop when its fired. If the VOLT was a regulated pv then it would always show the same voltage so since it does not it must not be regulated. It sounds kinda like a unregulated 14500 or 10440 (I not know the size of it) with a volt meter when atty off inside a fancy candy shell. Melts in your mouth not in your hand.
I don't have the pleasure of owning one of these fancy shiny things so I could mostly be talking out my ..... ;)
:vapor:

no it's not regulated. as you use it the voltage meter will read the current voltage that is being put out, not what's keeping the circuit closed so it doesn't matter what's on it, it'll tell you the status of the battery. a 2.0 ohm atty will read the same voltage when installed as no atty on at all. Just to be clear, the battery is not replaceable.
 

gotsteam?

Full Member
Verified Member
Dec 19, 2010
55
17
Alta Loma, SoCAL
admit-one.net
So I hop over to gotvapes.com from my newsletter and I'm perusing the gotvapes site and I find Joye 510 Dripomizer Cartomizer BLACK w/ Chrome Drip Tip 2.0 OHM. Then I read that it is now a one piece unit. Thats a bummer! no more free driptips! I was going to get a few of these so I could give em to a few fresh newbies that need a drip tip. Drip tips make vaping so personal, don't you think?
 

dannoman

Unregistered Supplier
ECF Veteran
Oct 22, 2010
6,896
12,330
Sugar Land, Texas USA
Our last order came in about half of them were one piece, when we reorder we are goign to try to get the old style back again...


So I hop over to gotvapes.com from my newsletter and I'm perusing the gotvapes site and I find Joye 510 Dripomizer Cartomizer BLACK w/ Chrome Drip Tip 2.0 OHM. Then I read that it is now a one piece unit. Thats a bummer! no more free driptips! I was going to get a few of these so I could give em to a few fresh newbies that need a drip tip. Drip tips make vaping so personal, don't you think?
 

Sugarnspice

Senior Member
ECF Veteran
Jul 8, 2011
96
15
Pacific,MO
Hi
never used a ce2 before-
Just got my order ce2 fluxomizers-xl black 2.4-2.6 ohm
I use a 900 mah ego 3.7 battery
did I order the wrong ohm rating-can I use these?
dying to try them-
also I have read there is no primer fluid on the wick-is there anything I need to do prior to filling?
any help would be great

Thanks
Misha
 

br5495

Old Man Resting in Peace
ECF Veteran
May 24, 2010
3,061
2,049
90
Liberty, Texas
Hi
never used a ce2 before-
Just got my order ce2 fluxomizers-xl black 2.4-2.6 ohm
I use a 900 mah ego 3.7 battery
did I order the wrong ohm rating-can I use these?
dying to try them-
also I have read there is no primer fluid on the wick-is there anything I need to do prior to filling?
any help would be great

Thanks
Misha

Many people prefer this combination Misha, so go ahead and try them before you die, heheh.

To begin with, just follow the directions included in the box. Then if you have problems, come back here and tell us. Hopefully, you won't have enough different hints and preferences to totally confuse you.
 

Credo

Ultra Member
ECF Veteran
Mar 28, 2011
1,976
930
MS
Hi
never used a ce2 before-
Just got my order ce2 fluxomizers-xl black 2.4-2.6 ohm
I use a 900 mah ego 3.7 battery
did I order the wrong ohm rating-can I use these?
dying to try them-
also I have read there is no primer fluid on the wick-is there anything I need to do prior to filling?
any help would be great

Thanks
Misha

That's what I personally buy for my eGo batteries.
I like a shorter hotter draw so the lower resistance ones are great for me.
Also, I find that over the weeks the lower resistance ones last me longer on the eGo before replacing or trying to clean them up. When they start getting weak from age (carbon build up) on my eGo batteries, I can clean them up to nearly new, or just move them to one of my higher voltage batteries and keep using them a while longer.

If you find they're a little too hot for your tastes give the following a try:
1. Use a longer drip tip to put some space between your mouth and the top-coil.
2. Take shorter burns/puffs...more like a real ciggy. Longer drags/burns gives the coils more 'time' to get hot.

Chances are, you'll like them just fine on those eGo batteries.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread