GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

[BlackBag]

When you have your image up in flickr, select the little box with a curved arrow (sharing button) on the lower right side. Then select the "HTML/BBCode", select the size, then finally select the radio button for "BBCode". Put your cursor in the quick reply box here and paste...

 

[repulsivesalvation]

I noticed my IGOL isnt sitting flush with the top cap. Has anyone else experienced this?

 

[Kataphraktos]

If you take off the top cap, there is a screw-within-a-screw device in the bottom. Loosen both of those, without removing either. Now, take the iGo-L (or any device), and screw it onto the top cap until it is flush (not too tight, doesn't need to be). Next, take the larger of the two screws and screw it until it stops - again, with very very little force, just enough to get it to stop moving. The iGo-L should now be flush. Finally, the smaller screw (the one that screws into the larger screw) can be adjusted so the battery sits securely, while the top cap screws on completely. Unscrewing this makes it "tighter", in case the battery is still loose. Screwing it further up into the larger screw makes it looser, if the top cap doesn't screw back onto the tube fully.

To repeat: nothing needs to be tightened. Just screw things on until they stop.

I noticed my IGOL isnt sitting flush with the top cap. Has anyone else experienced this?

 

[repulsivesalvation]

I am aware of that function, but when it sits flat I can notice one side has more of a gap the the other, Its like its crooked.

 

[Nach]

I am aware of that function, but when it sits flat I can notice one side has more of a gap the the other, Its like its crooked.

That's because the igo-l is a piece of china, and your GP is a masterpiece.

 

[repulsivesalvation]

that was my first guess. lol

 

[BrightLight]

Really exited for this new release coming soon, hopefully i will e luky wnough to get my hands on a lux! Perseas do you have any plans for a Canadian distributor? I don't mind ordering from Greece but it would be nice to have somewhere close to order replacement parts etc.

A Canadian vendor would be nice, as long as the store is run by good people.

The biggest improvement that I can currently see is if they could find a way to increase production, without negatively impacting product quality or customer service.

If they could do that, then Perseas could make some more money. Also, people would have a better chance of buying what they want to buy, which would mean a lower chance of people being disappointed.

Now, the people who are buying things only to make a quick profit may not like such a scenario, but Perseas and his customers, who want to buy his products to actually use them, should benefit.

 

[Idaholandho]

That's because the igo-l is a piece of china, and your GP is a masterpiece.

Nach, nice response, My post would have been alot of these .... .... ..........

 

[Nach]

And like my dad always said... You can take a POS, polish it up and make it nice & shiny, but it's still a POS!!

 

[liveone]

How can I use larger pics from Flickr? Anyways, Working out the adjustable pin and trying to figure it all out. 3/2 wrap 34 guage on hemp, the store did it for me.

I've been using Postimage.org - free image hosting / image upload since perseas mentioned it once and love it.

I noticed my IGOL isnt sitting flush with the top cap. Has anyone else experienced this?

One of my Igo-L's is lopsided too.

 

[Idaholandho]

And like my dad always said... You can take a POS, polish it up and make it nice & shiny, but it's still a POS!!

Mine always said, If a ...... puts on make-up she is still a ....... Just a 1k an hour .......
I've said too much.

 

[GB023]

Mine always said, If a ...... puts on make-up she is still a ....... Just a 1k an hour .......
I've said too much.

NO NO...Tell us more bro

 

[Larzis]

Alrighty, minor question here. Is there a way to buy the LUX center post screws separate?

Back when I bought the SS 2.5 I bought a LUX upgrade, and at that time it only came with one screw, so 18490 batteries do not exactly fit right in there. Easy enough to get around, I just use my 18500 or a shortstop with the 18490, but it would be nice to get ahold of the second longer screw.

 

[SoonerChris]

Fixed my gap issue until I can get my SnP. Boge LR pre-punched NON-flanged cartos. Thumbs up. 1.7ohm is much better than the 3.2 I had. Bought an iGo-L today as well. Time to build my first coil. Wish me luck.




Sent from my iPhone using Tapatalk

 

[BrightLight]

And like my dad always said... You can take a POS, polish it up and make it nice & shiny, but it's still a POS!!

lol… Now I have the mental image of someone trying to polish a real POS… Thanks for that.

It sounds like your dad would be a fun guy to be around.

 

[SoonerChris]

I cant wait to get that tank!

+1 Dam 10 characters....

 

[BrightLight]

Mine always said, If a ...... puts on make-up she is still a ....... Just a 1k an hour .......
I've said too much.

Now I’ve got a mental image of… um… never mind.

 

[Ratman]

lol… Now I have the mental image of someone trying to polish a real POS… Thanks for that.

It sounds like your dad would be a fun guy to be around.

Joe Dirt....

 

[Ratman]

Still hoping for a pic of the bead blasted spheroid on top of a 2.5 SS. Pbbbblleeeeeasse Eddie?

 

[kiba]

Alrighty, minor question here. Is there a way to buy the LUX center post screws separate?

Back when I bought the SS 2.5 I bought a LUX upgrade, and at that time it only came with one screw, so 18490 batteries do not exactly fit right in there. Easy enough to get around, I just use my 18500 or a shortstop with the 18490, but it would be nice to get ahold of the second longer screw.

larzis i have some flat top M3 screws in brass, or I know where you can get some, send me a PM bro