GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

Status
Not open for further replies.

perseas

Unregistered Supplier
ECF Veteran
Dec 11, 2011
3,442
17,927
Athens, Hellas
www.vapourart.com
Perseas, is the SnP 23mm essentially the same SnP 22mm with additional top & bottom caps over it?

You can put it that way. I don't say that is the exactly the same, because the top cap's holes with the holes of the cover ring of its size are made together and the holes of the optional set of 2 sizes rings with the top cap are made together too. There is no way to measure the start of the threading and produce just caps and rings, then mixing them as we wish. Their holes have to fit, so they are made as pairs or trio.
 
Last edited:

jasl90

Ultra Member
ECF Veteran
Verified Member
Jan 30, 2012
1,688
1,754
Jacksonville, FL
But I suppose it's a better deal than $60,000 for the 2.1 SS tubes...
9d908811de8b2c1971636d6d5079fe9b_zps3fdcf93f.jpg
 

buergermeester

Senior Member
ECF Veteran
Nov 29, 2012
142
205
Germany
You can put it that way. I don't say that is the exactly the same, because the top cap's holes with the holes of the cover ring of its size are made together and the holes of the optional set of 2 sizes rings with the top cap are made together too. There is no way to measure the start of the threading and produce just caps and rings, then mixing them as we wish. Their holes have to fit, so they are made as pairs or trio.

....that would mean the glass tube is exactly the same for both versions.
perseas, the caps will also be available with a matte surface for anti-fingerprint or only shiny editions?!
σας ευχαριστώ!
 

perseas

Unregistered Supplier
ECF Veteran
Dec 11, 2011
3,442
17,927
Athens, Hellas
www.vapourart.com
....that would mean the glass tube is exactly the same for both versions.
perseas, the caps will also be available with a matte surface for anti-fingerprint or only shiny editions?!
σας ευχαριστώ!


The fused quartz tubes and the bottom caps are the same.
The sides of the cover rings have brushed finish and their horizontal surfaces have polished finish.
 
Last edited:

GB023

Super Member
ECF Veteran
Verified Member
Jun 10, 2012
383
751
Great Northwest
You can put it that way. I don't say that is the exactly the same, because the top cap's holes with the holes of the cover ring of its size are made together and the holes of the optional set of 2 sizes rings with the top cap are made together too. There is no way to measure the start of the threading and produce just caps and rings, then mixing them as we wish. Their holes have to fit, so they are made as pairs or trio.

I sure hope my little brain has this figured out when it comes time to order...
 

Fury83

Vaping Master
ECF Veteran
Verified Member
May 14, 2012
3,066
3,069
Nowhere
for 6 grand you better be able to do what you want ;)


seriously what are the real prices and are they going to have 18500 lux tubes soon! I need to know, I need an 18500 tube...

Should be the same as vapourart shipped. Give or take a few bucks depending on domestic shipping and if you used dwolla. That's from the the supplier posted elsewhere.

I'd do local pickup but I'd have to start driving now.
 

Idaholandho

Gone Fishin'
ECF Veteran
Verified Member
Dec 8, 2012
7,379
23,171
Reading Naked
Is the button lock ring supposed to be loose fitting? Mine wiggles... seems to have loose tolerances in the threading.

It is suppossed to have a bit of play as it allows the user to lock and unlock the switch with a flick or two of a finger. I obviously do not use the lock as much with the new 2.5 switch. I try and remember to use it as when I switch to my out of the home PAP's I use the older switches and need to remember to lock them as well.
 
Status
Not open for further replies.

Users who are viewing this thread