GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 2

[crazyarms]

I probably should plan better. I typically go out with multiple batteries in my pockets just in case. Hopefully I will be able to pick up a V3 and the other 2 tubes, then I can be prepared for anything!
I purchased a used 2.5 ss Paps and I have had the GP fever ever since. I am even contemplating selling off my reo to purchase GP gear. I want to be able to own more than one mod I seriously enjoy. I absolutely love my 2.5 and SnP; I still catch myself just staring at it. I can't say that about any other mod I have owned either. I always found something I didn't like about all the mods I have had in the past including multiple pinoy mods and 2 nemesis'.

 

[Shinu77]

When will the paps v3 be available on domo?

 

[Firestorm]

I mostly use 18350s in and out of the house, but I often use 18500s when I use RDAs at home. Although I started out using 18650s (and hardly ever used my serialized 18350 tubes), I don't think that I've fired one in many many months. I know that there are lots of high amperage 18650 batteries on the market, but I don't sub-ohm or use that size anymore, so I haven't jumped on that bandwagon.

 

[cliffy15]

When will the paps v3 be available on domo?

Only Perseas knows that. He'll make an announcement well before VapourDay.

He previously alluded to a V3 announcement Friday but for everything else... your guess is as good as mine.

As for battery size, I don't any even have any 18650s or mods that can take them. I'm primarily a 350 user although I have more 500s on the way (my V3 is the only thing I currently have that can even use a 500).

I didn't use any atties or tanks bigger than the Spheroid until last December, though, so my perspective is totally different.

 

[fjgotgame24]

Wait so the V3 hasnt dropped yet? I thought they were all already sold out? Also does anybody know if the Gus switch will work with the Paps Lux 2.5? It is 20x1 mm, but not sure if that is enough to make it fit. Im hoping since they used to work together or what not they make similar designed mods.

 

[chadsmo]

The first shipment comprised of preorders have gone out. The second batch should be ready soon ish.

 

[crss]

Wait so the V3 hasnt dropped yet? I thought they were all already sold out? Also does anybody know if the Gus switch will work with the Paps Lux 2.5? It is 20x1 mm, but not sure if that is enough to make it fit. Im hoping since they used to work together or what not they make similar designed mods.

Gus parts fit my paps n jm22's. But my OCD now is so bad, i cant cross brands.

 

[fjgotgame24]

Can you post pic of the gus button on your paps? I ordered a 2.5 lux tube and looks like this will be my only option, im hoping it dont look too bad

 

[StrikeIII]

Gus parts fit my paps n jm22's. But my OCD now is so bad, i cant cross brands.

I was eyeing that JM22 Carbon V2 mod. Looks nice and will probably be better with a Paps switch.

Sent from my Galaxy Note 3 using Tapatalk 4

 

[LReyes66]

I've always wanted a jm22 carbon as well... More appealing now with a paps switch

Sent from my Nexus 5 using Tapatalk

 

[Tinben]

Battery size! I have been using 350's for awhile now and will probably sell them with my 350 mod. That's if I sell it. I may have to so I can buy more GP.
Now on the other hand I plan on running all my GP stuff with 490 and 650. I just feel like I ain't getting a quality vape from my 350's.

 

[StrikeIII]

I've always wanted a jm22 carbon as well... More appealing now with a paps switch

Sent from my Nexus 5 using Tapatalk

It just sucks that you can't buy the tubes separately. You have to buy the whole mod for the mode you want. Unless I missed it somewhere.

Sent from my Galaxy Note 3 using Tapatalk 4

 

[Gunnygt49]

Can someone please help me with a big problem I have. So after cleaning my device thoroughly, I went to put everything back together and as I was screwing on the bottom button part with the battery inside...IT GOT STUCK! I have seriously tried with all my strength, even though I know I'm not strong I feel it shouldn't get stuck like this.... here's a not so helpful picture

 

[landman2k1]

Can someone please help me with a big problem I have. So after cleaning my device thoroughly, I went to put everything back together and as I was screwing on the bottom button part with the battery inside...IT GOT STUCK! I have seriously tried with all my strength, even though I know I'm not strong I feel it shouldn't get stuck like this.... here's a not so helpful picture View attachment 319412

I would recommend sticking it in the freezer for 5-10 minutes... That generally is the first thing I try.

 

[Pathology]

Go back and forth with the torqueing (tighten, loosen, tighten, loosen, etc.) while doing this with the button, rotate the mod as if you were loosening the whole thing. It doesn't hurt to put it in the freezer for 20-30 minutes before trying this. I had to repeat this process for about 2 hours once and if finally came off.

Let us know if it works. Don't give up. It'll come off one way or another.

..Sent from the vape lair..

 

[Gunnygt49]

Thank you for the advice I will give it a try. My hands can't take much more

 

[Gunnygt49]

Go back and forth with the torqueing (tighten, loosen, tighten, loosen, etc.) while doing this with the button, rotate the mod as if you were loosening the whole thing. It doesn't hurt to put it in the freezer for 20-30 minutes before trying this. I had to repeat this process for about 2 hours once and if finally came off.

Let us know if it works. Don't give up. It'll come off one way or another.

..Sent from the vape lair..

I will not give up, lol but I don't think I have ever felt so helpless before. This sucks. I have been looking over this thread for a bit of a while now and I just got my 5 posts to post in other threads. Wish this wasn't the first thing I posted in here for. Anyhoo here was my setup before this travesty.

 

[qorax]

I would recommend sticking it in the freezer for 5-10 minutes... That generally is the first thing I try.

^True. With stuck parts in e-Cig business > Freezer first√ helps 99% times.

 

[Cucco]

Can someone please help me with a big problem I have. So after cleaning my device thoroughly, I went to put everything back together and as I was screwing on the bottom button part with the battery inside...IT GOT STUCK! I have seriously tried with all my strength, even though I know I'm not strong I feel it shouldn't get stuck like this.... here's a not so helpful picture View attachment 319412

So sorry. Good luck!

 

[Gunnygt49]

Okay so after leaving it in the freezer for about 25 minutes. I tried untwisting it again and the thing does not even let me wiggle it a little. This is so frustrating its hilarious. Shredded almost all my epidermis on my middle finger, blisters forming on the other hand. LOL yup I have gone crazy. Well I guess my solution can be to just buy a Ti version but would love that LUX too..