GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 2

Status
Not open for further replies.

Newfdog

Super Member
ECF Veteran
Verified Member
Nov 25, 2013
306
1,075
Portland, Maine USA
So no one panics. I am going to sell a couple of my PAPS. They are the ones I loaned out to those who couldn't commit until they held one :). I have 2 sets - 350/500 x2. I will list them with one switch each most likely and they will be close to retail. I usually highly discount my used gear but not GP. The biggest reason is that I like to keep the values up for GP. If I sit on them, I sit on them. I am not selling them for the $. It is just time to. I will keep a full 500 to loan out occasionally to others but, I am going to slow down on the sending out $PAPS$ to those I don't know very well.
Just saying, I have mine, D had hers and we have ours, those arent going anywhere :)

Looks like I'll be stalking the classies for an idahobro post :)
 

Peter_C

Who?
ECF Veteran
Verified Member
Nov 7, 2013
1,856
5,126
63
Akron, Ohio
www.facebook.com
RE: The issue, I had with creating a domovaporco account:

I contacted them, via a form submission. Immediately, Blake resolved the issue, and created an account for me. WOW! WOW! WOW! :)

Do you feel special? You look special. I like being called special. I think special is a special word...
 

Peter_C

Who?
ECF Veteran
Verified Member
Nov 7, 2013
1,856
5,126
63
Akron, Ohio
www.facebook.com
20140306_195250.jpg


So this came in today... Not sure how I feel about it just yet - I kinda like it but it feels loooong (The pic is with a 18500) and extremely light. I haven't had a mod made out of aluminum in a long time.

I suppose perhaps it's just what you are comparing it to? Or what you are used to holding in your hand?
 

9ball_AJ

On the Snap...
ECF Veteran
Verified Member
I am really hating the forum the way it is right now~!

Nothing is working right, and my email notifications are quite useless as they don't put me at my first unread post any longer, and if I reply to a post, it doesn't place me at my new post - so then I have to look around to find my place again - I've waited most of a week - are they gonna fix it or is this the NEW ECF???

I couldn't agree more. I spent about an hour the other day trying everything I could think of on my end. Multiple browsers, clearing caches, etc.

At least tapatalk seems to be working properly, but I use my PC about 70% of my time on ECF...
 

Serket

Senior Member
ECF Veteran
Verified Member
Mar 28, 2013
236
345
Fort Worth, TX
I suppose perhaps it's just what you are comparing it to? Or what you are used to holding in your hand?

It is for sure. But it's just not for me after all. It's up on the classifieds now. This is the shortest time I've kept a mod before deciding to get rid of it. I guess I'm just too used to mechs and GP quality.

Sent from my SM-N900T using Tapatalk
 

Newfdog

Super Member
ECF Veteran
Verified Member
Nov 25, 2013
306
1,075
Portland, Maine USA
I couldn't agree more. I spent about an hour the other day trying everything I could think of on my end. Multiple browsers, clearing caches, etc.

At least tapatalk seems to be working properly, but I use my PC about 70% of my time on ECF...

I talk with one of the forum admin the other day. They're aware of the issues and are working on fixing them.
I hope it's soon ....
 

perseas

Unregistered Supplier
ECF Veteran
Dec 11, 2011
3,442
17,927
Athens, Hellas
www.vapourart.com
Is there any way for me to buy just the switch and not the whole assembly? I just need the polished button.

The reason we don't sell it as a spare is that an additional sanding work might or might not be needed to ensure a flawless operation. Every switch is hand treated because the tolerance of the moving parts is pretty tight. Therefore we cannot guarantee that a spare button will fit without the need of an extra work on behalf of an experienced user. If you feel confident with dremel, grit papers and working with tiny parts, send an email to info@vapourart.com on Monday morning to buy just the button.
 

Loop

Super Member
ECF Veteran
Verified Member
Feb 18, 2009
387
927
Bellevue,WA
Whoo hoo Finally caught back up, this thread is moving at an amazing pace as of late. I had to remain silent until I actually caught up!

Serket is that a futura mod? That thing does look quite long. I got the ZNA instead because it looked like it would be alot shorter and is made of steel.

Bro! selling some Paps stuff?!?!?1?one Are you selling any bits and pieces? I need a 2.5 switch to really complete my Paps 2.5 collection.
Also wanted to thank you for sending out the PnB adapter :D


Perseas you are a brave man! I can't bend that way at all and would be really scared to attempt any Yoga! My body is in pretty bad shape though after the car accident last year. Also wanted to thank you for the fast reply to my e-mail, also looks like my 100ml bottle of grants already shipped out. :D I am also happy to hear the pre-orders are shipping out soon, I pre-ordered my Paps V3 and Heron from Domo this time around.

Welcome to all the new faces that have shown up, you guys will love the GP line of products. The GP team provides excellent products but also backs them up with amazing service and support. You will not be disappointed at all with anything you get from Team GP.
 

INFRNL

Super Member
ECF Veteran
Verified Member
Dec 3, 2013
866
2,439
Colorado
Oh man that is dangerous for me. I see a lot of things I want. Some very beautiful set ups
Thats what happened to all of us and joined us into the family we have now....and continually growing.

This place will make you go broke. Have to have the wife, girlfriend or whatever set an allowance for you.

Welcome to the family:laugh:
 

Serket

Senior Member
ECF Veteran
Verified Member
Mar 28, 2013
236
345
Fort Worth, TX
Whoo hoo Finally caught back up, this thread is moving at an amazing pace as of late. I had to remain silent until I actually caught up!

Serket is that a futura mod? That thing does look quite long. I got the ZNA instead because it looked like it would be alot shorter and is made of steel.

Bro! selling some Paps stuff?!?!?1?one Are you selling any bits and pieces? I need a 2.5 switch to really complete my Paps 2.5 collection.
Also wanted to thank you for sending out the PnB adapter :D


Perseas you are a brave man! I can't bend that way at all and would be really scared to attempt any Yoga! My body is in pretty bad shape though after the car accident last year. Also wanted to thank you for the fast reply to my e-mail, also looks like my 100ml bottle of grants already shipped out. :D I am also happy to hear the pre-orders are shipping out soon, I pre-ordered my Paps V3 and Heron from Domo this time around.

Welcome to all the new faces that have shown up, you guys will love the GP line of products. The GP team provides excellent products but also backs them up with amazing service and support. You will not be disappointed at all with anything you get from Team GP.

Yep, it is a futura. I've had a few offers for a ZNA so I might end up taking that but I'd rather avoid going regulated again.

Sent from my SM-N900T using Tapatalk
 

crss

Ultra Member
ECF Veteran
Verified Member
  • Mar 19, 2013
    1,716
    4,485
    dev/null
    Thats what happened to all of us and joined us into the family we have now....and continually growing.

    This place will make you go broke. Have to have the wife, girlfriend or whatever set an allowance for you.

    Welcome to the family:laugh:
    UGHHHH, my wife just walked in, i am looking for ceramic tipped tweezers. She said no more vape gear, till i have a steady income. I had right knee surgery, from a work injury & now just site @ home. Set an allowance? That wont work, but we do everything together. Off to the farmers market to get fresh veggies.
     

    Cucco

    Vaping Master
    ECF Veteran
    Apr 9, 2013
    3,817
    12,462
    Bonita Springs, Florida, USA
    UGHHHH, my wife just walked in, i am looking for ceramic tipped tweezers. She said no more vape gear, till i have a steady income. I had right knee surgery, from a work injury & now just site @ home. Set an allowance? That wont work, but we do everything together. Off to the farmers market to get fresh veggies.

    Ceramic tipped tweezers? I understand they are non-conductive. But, what are you using them for? Just curious. I love tools. Just looking for a reason why, I may want them. :)
     

    INFRNL

    Super Member
    ECF Veteran
    Verified Member
    Dec 3, 2013
    866
    2,439
    Colorado
    Ceramic tipped tweezers? I understand they are non-conductive. But, what are you using them for? Just curious. I love tools. Just looking for a reason why, I may want them. :)

    Reason... to have a cool new tool/toy:D
    I have never seen them either. I just use a set of tweezers I got when I worked at a cable manufacturing plant
     

    Cucco

    Vaping Master
    ECF Veteran
    Apr 9, 2013
    3,817
    12,462
    Bonita Springs, Florida, USA
    Reason... to have a cool new tool/toy:D
    I have never seen them either. I just use a set of tweezers I got when I worked at a cable manufacturing plant

    That's a good reason. I have many quality SS tweezers. INFRNL, you know about me and SS. :) I use them, with my atty maintenance and builds. Hmm...
     

    GB023

    Super Member
    ECF Veteran
    Verified Member
    Jun 10, 2012
    383
    751
    Great Northwest
    Hello from Los Angeles.

    10 days into vaping and 10 days of non-smoking.

    Was able to place my order with Vapourart on a GP Paps X this past Vapourday.

    Cant wait.

    Hi EmE, 10 days...wow! Congrats! Hang in there my friend, you are giving yourself and those that love you a great gift. You also are about to own a device of the highest build quality, fit and finish and best customer service in the industry. Thanks for posting...
     

    GB023

    Super Member
    ECF Veteran
    Verified Member
    Jun 10, 2012
    383
    751
    Great Northwest
    Ceramic tipped tweezers? I understand they are non-conductive. But, what are you using them for? Just curious. I love tools. Just looking for a reason why, I may want them. :)


    IDK, but if I had a pair, I'd be at my bench right now trying to squeeze a micro-coil while I fired it...
    confused-28.gif
     
    Status
    Not open for further replies.

    Users who are viewing this thread