GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 2

[Nach]

I believe on a daily basis a little part of me turns into that person we all make fun of, when they're expecting that vape mail that they think was made specifically for them alone.

Heron.... you WILL be mine!

How's everyone doing?

 

[chadsmo]

Awesome , you?

Just installed iOS 7.1 that came out today on my 5s and my phone is absurdly fast. Like remember the way you felt they first time you took a brand new GP mod out of the package, undoubtably being left nearly speechless ? That's how fast 7.1 is on the 5s , it's crazy.

 

[OhHiImRob]

Awesome , you?

Just installed iOS 7.1 that came out today on my 5s and my phone is absurdly fast. Like remember the way you felt they first time you took a brand new GP mod out of the package, undoubtably being left nearly speechless ? That's how fast 7.1 is on the 5s , it's crazy.

Hah, nice. I'm an android guy personally. Glad your 5s is rocking though, (and that it made it through to even get it hehe I know you had an incident a while back..)

 

[chadsmo]

Yup lol. The only adverse issue from it's visit in the toilet is that my camera doesn't like to focus on things less than 6 inches from the lens.

 

[OhHiImRob]

Yup lol. The only adverse issue from it's visit in the toilet is that my camera doesn't like to focus on things less than 6 inches from the lens.

More pics of microcoils!

 

[Zbeast08]

I finally got around to setting up my second spheroid and have a couple questions....I set up the microcoil and yarn perpendicular to the post but noticed some videos showing the coil parallel to the screws, does it really matter? Also, my new setup seems to have a tighter draw than my older one, what could I change to make it a little more airier...less filler??. Using it in a Microstick. Great vapor and flavor but a little tight on the draw if I were to take a direct lung hit! Thanks for any suggestions as I am still fairly new to these toppers!
Btw, I can hardly wait for my Heron and my first GP mod, Paps v3, woohoo!


Sent from my iPad using Tapatalk

 

[Zbeast08]

Awesome , you?

Just installed iOS 7.1 that came out today on my 5s and my phone is absurdly fast. Like remember the way you felt they first time you took a brand new GP mod out of the package, undoubtably being left nearly speechless ? That's how fast 7.1 is on the 5s , it's crazy.

That's good to hear as I am updating as we chat!


Sent from my iPad using Tapatalk

 

[chadsmo]

It's so fast.…

 

[INFRNL]

Wow... catching up today was like it used to be for a few days. You guys/gals need to take a break a bit more often

Cucco, glad you are liking your X as mentioned you could get the pnb to polish you X to your liking

@Chad: did that r91 show up today?

@everyone. .. I feel left out with all the talk about being military
I guess I could say, my dad served a short term in the Airforce and my oldest son (23) is in the Airforce stationed in Bellevue, Nebraska. He does something classified and can not talk about it.

And thats all I got for now. Hope everyone had a great day. Sunny and 70 here today, snow and 35 tomorrow. Colorado is one of the few states where all seasons can happen in the same day

 

[chadsmo]

INFRNL , sadly Canada Post sucks and my R91 did not show up today

 

[Nach]

Awesome , you?

Just installed iOS 7.1 that came out today on my 5s and my phone is absurdly fast. Like remember the way you felt they first time you took a brand new GP mod out of the package, undoubtably being left nearly speechless ? That's how fast 7.1 is on the 5s , it's crazy.

Thanks man, I didn't even get the notification yet. Downloading it now!

 

[Idaholandho]

I finally got around to setting up my second spheroid and have a couple questions....I set up the microcoil and yarn perpendicular to the post but noticed some videos showing the coil parallel to the screws, does it really matter? Also, my new setup seems to have a tighter draw than my older one, what could I change to make it a little more airier...less filler??. Using it in a Microstick. Great vapor and flavor but a little tight on the draw if I were to take a direct lung hit! Thanks for any suggestions as I am still fairly new to these toppers!
Btw, I can hardly wait for my Heron and my first GP mod, Paps v3, woohoo!


Sent from my iPad using Tapatalk

It matters not. I prefer a diag or perpendicular so the airhole is underneath directly but, you know it can be done with a bit of fine tuning on any coil placement.
Perpendicular also is easier to set up for me as, the tails go opposite direction on my Spheroid micros. Just wrap on post clockwise so the nut clamps well on wire when tightening.
The airflow has been talked about by lung hitters a bit. You may pm 9baller about his fix. I don't think he is a lung hitter but out will help.
Glad you got it goin on bro.

 

[Idaholandho]

PS. I still use thumb screws on all but one Spheroid. May be why it's easier as mentioned in the past, my hands are freakishly big enough to palm a large pizza box.

 

[Zbeast08]

It matters not. I prefer a diag or perpendicular so the airhole is underneath directly but, you know it can be done with a bit of fine tuning on any coil placement.
Perpendicular also is easier to set up for me as, the tails go opposite direction on my Spheroid micros. Just wrap on post clockwise so the nut clamps well on wire when tightening.
The airflow has been talked about by lung hitters a bit. You may pm 9baller about his fix. I don't think he is a lung hitter but out will help.
Glad you got it goin on bro.

Will do!! I have to say that the spheroid is a mighty fine...fine...fine piece of work!! I am really glad to be a "small" part of the GP team and thank all of you for sharing your helping tips and kindness!! Peace out!


Sent from my iPad using Tapatalk

 

[Zbeast08]

PS. I still use thumb screws on all but one Spheroid. May be why it's easier as mentioned in the past, my hands are freakishly big enough to palm a large pizza box.

Lol, Perseas did manage to add 2 v3 upgrades to my preorder!


Sent from my iPad using Tapatalk

 

[Akdare]

I drilled out my center airhole to 1.5mm, and the holes on the 510 to 1mm. Just a bit bigger than spec, but a big improvement for me. I used a long pointy diamond dremel bit. You'll want to take the base apart so you can drill the center hole a little bit from each side. The stainless steel is extremely tough, and it will take a while.

 

[Zbeast08]

I drilled out my center airhole to 1.5mm, and the holes on the 510 to 1mm. Just a bit bigger than spec, but a big improvement for me. I used a long pointy diamond dremel bit. You'll want to take the base apart so you can drill the center hole a little bit from each side. The stainless steel is extremely tough, and it will take a while.

I think this tip is for me....lmao, I don't think I could handle taking a drill out with a bit and press the power button while gazing at my spheroid!! I would love to have more air but that tip may be beyond my skill level!! Thanks anyway Akdare!


Sent from my iPad using Tapatalk

 

[landman2k1]

I drilled mine out a bit too, using cobalt bits. I think stock is supposed to be 1.2? I'm probably wrong. Regardless, the 1.2 mm bit would not fit, so I drilled it out pretty easily.

 

[cliffy15]

I WAS planning on opening mine up to loosen the draw but I either got used to it or found the right setup (cotton wicks used to droop and fold into the bell during hard pulls) ... because it's works awesome for me now as stock ...

 

[Idaholandho]

Lol, Perseas did manage to add 2 v3 upgrades to my preorder!


Sent from my iPad using Tapatalk

Nice! Good lookin out P!