GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 2

[StrikeIII]

Really loving this set up. Thanks again to INFRNL, the SnP is in good hands. Got some new batteries and now I'm ready for the arriVal of my V3 and Heron.

Sent from my Galaxy Note 3 using Tapatalk 4

 

[chadsmo]

Why is this crazy? This is not my pic but this is 4 pieces of 26ga Kanthal in there with room for 1 or 2 more.

There's pictures of 7 strands of 26G in that same hole. ETA: Found it here

Crazy talk, like 'wow that's crazy!' Or 'that's awesome' or 'I can't believe it's not butter'.

 

[Firestorm]

It's a downgrade from the original silver plated posts and screws.

It depends if you're looking for better conductivity (silver wins) or less maintenance (gold doesn't tarnish). The downside of both is that the plating will rub off over time (I can see, as I had suspected, that screwing my Stillare into the GPin is slowly removing some of the gold plating in the center of the 510 center pin).

 

[darkgear]

I only have the Quasar with me today. After using the Origen v2 for a while the Quasar is a drip fest. I feel like I'm constantly dripping, dripping, dripping.

 

[Say10]

Need a new drip that matches but this one works great with the kraken.

 

[Woody7781]

I only have the Quasar with me today. After using the Origen v2 for a while the Quasar is a drip fest. I feel like I'm constantly dripping, dripping, dripping.

Mmmmm Girl Scout cookies. Sorry. Fat guy checking in.

 

[Cucco]

O.K.. How do I lock my X? Is there a trick?

 

[Akdare]

Mmmmm Girl Scout cookies. Sorry. Fat guy checking in.

Woody!

In my house, with Girl Scout Cookies, an open box is an empty box!

Hope you're doin' well!

 

[Dan Knight]

O.K.. How do I lock my X? Is there a trick?

Turn the switch button counter-clockwise.

 

[chadsmo]

O.K.. How do I lock my X? Is there a trick?

If you're looking at the bottom just turn it counter clockwise. It will turn 3/4 of the way.

 

[Astarain]

Delivered after 9pm. Was starting to get a bit impatient. It was worth the wait!

 

[Woody7781]

Woody!

In my house, with Girl Scout Cookies, an open box is an empty box!

Hope you're doin' well!

Sissy!!!!! Lol. Yeah those are just too good. Luckily I haven't been approached yet, but here's hoping! I'm doing well. Expecting 10-18" of snow from 2am to tomorrow evening. Today was actually sunny and 50. Go figure. Sent my beloved X to Domo today to see what's going on with my top cap. Ugh. I'm missing it already.
Hope all is well with you as well!!

 

[Cucco]

When I received her, the button was next to impossible to unlock. Since I started vaping her, I have not attempted to lock her. Too busy vaping her! Tonight I attempted to lock her, just cause. She would not lock. I just took her apart to take a look see. Now, I am confused. She is not going back together right. Ugh. I will go fool with her. Try to figure it out. If I can't, I'll get back and scream for 'HELP'. I am so sad at the moment.

 

[Woody7781]

When I received her, the button was next to impossible to unlock. Since I started vaping her, I have not attempted to lock her. Too busy vaping her! Tonight I attempted to lock her, just cause. She would not lock. I just took her apart to take a look see. Now, I am confused. She is not going back together right. Ugh. I will go fool with her. Try to figure it out. If I can't, I'll get back and scream for 'HELP'. I am so sad at the moment.

It's pretty simple. The spring goes on the column under the negative screw. Just make sure the squares line up with the locking mechanism and it should go right together.

 

[Cucco]

I knew, that turning her should have locked her. But, that was not the case. She would not lock. She just kept turning, until she came apart. So, I thought maybe there was a trick. Not! I took her apart, put her back together, and she is now fine. Maybe, the bottom pin was loose to start with? I just don't know. I wish I did know. I hate, when I don't know what went wrong. Ugh! Emergency cancelled!

Thanks guys!

 

[landman2k1]

I knew, that turning her should have locked her. But, that was not the case. She would not lock. She just kept turning, until she came apart. So, I thought maybe there was a trick. Not! I took her apart, put her back together, and she is now fine. Maybe, the bottom pin was loose to start with? I just don't know. I wish I did know. I hate, when I don't know what went wrong. Ugh! Emergency cancelled!

Thanks guys!

Yep, you had a screw loose!!

 

[Akdare]

Sissy!!!!! Lol. Yeah those are just too good. Luckily I haven't been approached yet, but here's hoping! I'm doing well. Expecting 10-18" of snow from 2am to tomorrow evening. Today was actually sunny and 50. Go figure. Sent my beloved X to Domo today to see what's going on with my top cap. Ugh. I'm missing it already.
Hope all is well with you as well!!

I know your neck of the woods gets a lot of snow, but you guys have really had an awful winter. Hopefully Blake will be able to get it fixed fast...

I'm doing ok...too busy with work, but what else is new...

 

[Cucco]

Yep, you had a screw loose!!

Yes, well, we already know that. I came out of that closet, a long time ago.

But, really, was that it? Has this happened to someone else? It must have come that way, because I have not yet fiddled with her.

 

[landman2k1]

Yes, well, we already know that. I came out of that closet, a long time ago.

But, really, was that it? Has this happened to someone else? It must have come that way, because I have not yet fiddled with her.

I was being serious, and the pun was intended, lol. The screw in the switch was loose, which allowed the button turn past the locked position, and when you kept turning you disassembled the switch.

 

[Woody7781]

I know your neck of the woods gets a lot of snow, but you guys have really had an awful winter. Hopefully Blake will be able to get it fixed fast...

I'm doing ok...too busy with work, but what else is new...

Yeah it's nuts. Easily the worst winter I can remember in my adult life as of yet. And just blistering cold winds. I have faith in Blake. I mean, we saw his coil jig right?! Lol. Just kidding.
Hopefully you get some down time at work soon. We've been busy as well being tax season and all. I've been hitting some high numbers.