GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 2

[Spydro]

I know of one other drip tip manufacturer that has a tip with sleeves, one of the sleeves is brass.

Brian at Drip Tip Designz makes SS core DT's with brass and brass braided sleeves (among a host of others) and will do custom to your design. He's made a bunch of custom tips for me, is very fast to make and ship (sometimes the same day), has exceptional customer service and is just plain a nice guy.

Custom Drip Tips

Here's what I have coming to accent my PAPS SS's and LUX's on my 4 Herons... 2 SS and 2 Brass 22mm (+ 2 all SS for the Spheroids).

Drip Tips | Stainless Steel Drips Tips | Brass Drip Tips

EDIT: There was an email and shipping snafu that our own fantellie in the UK singlehandedly got straightened out for me. When I know the bottom line I'll fill you all in on the details. But for starters, fantellie is jewel and ST's customer service is top drawer.

 

[Ace Wop]

these are NICE!!!!

No medical emergencies allowed!!!


Sent from my iPhone using Tapatalk

Brian at Drip Tip Designz makes SS core DT's with brass and brass braided sleeves (among a host of others) and will do custom to your design. He's made a bunch of custom tips for me, is very fast to make and ship (sometimes the same day), has exceptional customer service and is just plain a nice guy.

Custom Drip Tips

Here's what I have coming to accent my PAPS SS's and LUX's on my 4 Herons... 2 SS and 2 Brass 22mm (+ 2 all SS for the Spheroids).

Drip Tips | Stainless Steel Drips Tips | Brass Drip Tips

EDIT: There was an email and shipping snafu that our own fantellie in the UK singlehandedly got straightened out for me. When I know the bottom line I'll fill you all in on the details. But for starters, fantellie is jewel and ST's customer service is top drawer.

 

[yankeebobo]

haha very true.

Sent from my Z796C using Tapatalk

So did you get an X or didn't you. I'm confused.

 

[Shaketuga]

No :/

Sent from my Z796C using Tapatalk

 

[yankeebobo]

Why? It's a once in a lifetime opportunity. Or 3.

 

[sedge]

Drip Tips by ohman here on ecf is always a good choice. He does custom and great CS.

http://www.e-cigarette-forum.com/forum/showthread.php?t=436537

 

[Shaketuga]

I had to choose that or the Heron

Sent from my Z796C using Tapatalk

 

[yankeebobo]

 

[yankeebobo]

Do both. You only live once. There's a Ti coming.

 

[jrs99]

I'm officially off the bench
Just realized I need extra cash for my daughter's field hockey camp next month. As much as I wants the Ti, I want her to go to camp more.
I'll console myself with a new SS X and I just rescued Lux 2.5 #0082 from the classifieds

 

[Idaholandho]

So did you get an X or didn't you. I'm confused.

Funniest post today...still laughing

 

[jrs99]

PnB tip.
Make sure it's TIGHT >.<

This was trying to polish 2.5 350 tube with Dremel. It seems to have slipped a bit
Idabro, still have that PnB you were looking to get rid of? Only need half

 

[yankeebobo]

PnB tip.
Make sure it's TIGHT >.<

This was trying to polish 2.5 350 tube with Dremel. It seems to have slipped a bit
Idabro, still have that PnB you were looking to get rid of? Only need half

Uhhh. Damn. A bit? Wow

 

[yankeebobo]

Shak. Want the other half of a PnB?

 

[jrs99]

Uhhh. Damn. A bit? Wow

I'm just happy it didn't come off and throw the tube.
Don't think I'll be using the Dremel any more

 

[Idaholandho]

PnB tip.
Make sure it's TIGHT >.<

This was trying to polish 2.5 350 tube with Dremel. It seems to have slipped a bit
Idabro, still have that PnB you were looking to get rid of? Only need half

I've seen this happen even when chucked fully and typically due because of too much pressure on polishing/brushing hand.
If you can in the future, cut the thin post off needed and chuck just the larger post into a drill

The post can be bent back but no matter how straight you think it is the tubes will wobble.
No the other tool was spoken for by GP Fambro but, I can certainly help you out and am happy too.
You know the drill....pun intended

 

[Firestorm]

I'm just happy it didn't come off and throw the tube.
Don't think I'll be using the Dremel any more

Yeah, the Dremel moves too quickly. If it's any consolation, I did the same thing. I managed to set it back and I only use a power drill now.

 

[yankeebobo]

You know the drill....pun intended

You went there.

 

[Vapourz_411]

Just checking in with the GP Family...bringing back the Paps SS V2.5 for some love, simple classy lines

 

[Idaholandho]

Great photo. Thanks!