This is the Innovape Silencer in brass on the Lux - though that particular topper combination is 23mm and is awaiting the X Lux I've just ordered
GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 2
- Thread starter perseas
- Start date
- th_trl_thread_readers 0
- Status
This is the Innovape Silencer in brass on the Lux - though that particular topper combination is 23mm and is awaiting the X Lux I've just ordered
This is the Innovape Silencer in brass on the Lux - though that particular topper combination is 23mm and is awaiting the X Lux I've just ordered
Did you order the gold afc ring for the EVIVA too?
I love mine but I'm an SS kind of guy.
Sent from my HTC One_M8 using Tapatalk
yes indeed I'll do my best to be present more. I missed y'all it's been crazy trying to get this label off the ground.That was a long time ago my vacant friend
Sent from my Z796C using Tapatalk
P, now you just opened up a can of worms with the single X tube. Now i want one in SS for 18490/500. Lol.
You should just make one for both sizes in SS and AB.
Sent from my HTC One_M8 using Tapatalk
You should just make one for both sizes in SS and AB.
Sent from my HTC One_M8 using Tapatalk
A day or so ago, I mentioned the copper/brass GP tips. Perseas said that although it can be done, and from most studies showing it's not unhealthy, he won't risk it. And I can't blame him. So that's a no go for now.
I bought the Eviva when they first came out. I had absolutely no intention of buying an X Lux until about 12 hours before the last Vapourday started
So, no, I don't have the gold AFC. I'll see how it looks in SS - I think any difference in colour is fine when the drip tip is far away; I'm not convinced I'd be happy with a gold afc.
I'm glad you love the Eviva - mine has not even been fired yet :/ I'm just so used to my Sophias and dripper Pro that I haven't quite gotten around to it (and I'm incredibly lazy). I love the look of the Eviva, though. Oh - I've also been away ... nearly forgot my primary excuse for not having used the Eviva
So how low of a resistance can the G Pin handle before risk of damage?
Sent from my Z796C using Tapatalk
Sent from my Z796C using Tapatalk
I'm considering releasing my last non GP from the stable but I like to drip from time to time. I usually don't go below .4 ohms but...
Sent from my Z796C using Tapatalk
Sent from my Z796C using Tapatalk
Alright I'm off to bed. Night all sorry if I ran anyone off with my catchup questions.
Sent from my Z796C using Tapatalk
Sent from my Z796C using Tapatalk
Shake, here you go. Right from the man himself:
http://www.e-cigarette-forum.com/fo...o-gp-snp-more-part-2-a-1270.html#post13411328
It can accommodate 18350, 18490/500 and 18650 with what it ships standard
As Sedge said, plus X can accept 18650+Kick, so it works in 18350, 18490, 18500, 18650 and 18800 mode using just the main body with each one or two of the eXtension tubes, hence the name X
Last edited:
I'll tell you like I've told others. I do sub-ohm. Sometimes with my Paps X. My spring in my GPin is in the same shape that I received it in. I have gone down to .18ohms on it.
So, can it handle sub-ohm vaping? In my experience: Yes.
Do I recommend sub-ohm vaping with GP gear/GPin? Absolutely not.
Not only is it not recommended by Perseas and Co., the gear is not designed for it either. The GPin alone is not going to hit "right" with sub-ohming. And it shouldn't. That wasn't what it was designed for.
Also, you do run the risk of collapsing your GPin's spring. And in the case that it does happen, please keep these things in mind and do not be upset that your spring collapsed or some other thing went wrong, and keep the extra cash aside to buy a spare spring/other part that ultimately was damaged because of you, not GP/VapourArt.
I would like to express that I am not trying to be rude...only blunt and to the point. These are things that I have accepted as I am someone who does (or rather 'did') this as well. I have since bought a mod that is meant for sub-ohming and leave my GP gear to my RTAs, which they are more designed for. I'd suggest you do the same.
Good morning my fellow GP'ers!! Hope everyone had a super productive Vapourday!!
I spent last night polishing my Lux tubes (X Lux, 18350 Lux & 18500 Lux).....used Mother's metal polish which seems to work great.....it's amazing how much black stuff comes off of the tubes! I didn't even let them get too "patina'd" either! I just love the look of a freshly polished alumbronze tube!!
I spent last night polishing my Lux tubes (X Lux, 18350 Lux & 18500 Lux).....used Mother's metal polish which seems to work great.....it's amazing how much black stuff comes off of the tubes! I didn't even let them get too "patina'd" either! I just love the look of a freshly polished alumbronze tube!!
- Status
Similar threads
- Locked
- Sticky
- Locked
