GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 3
- Thread starter perseas
- Start date
- th_trl_thread_readers 0
- Status
All the best from me too. They said this week the orders would start to ship away. Cant wait to get mine hands on these beautys. Was looking everywhere for some gp items and now I crossed my list out except gp heron 510 adapter v1. But I believe it would turn up in time somewhere. I did try a lot of others mtl tanks but nothing beats spheroid and heron so far. Waiting for new design from them and hope they dont go in dl direction.
*just got tracking number for my order
*just got tracking number for my order
Last edited:
Darn... shipping out this week, you say? I think maybe I got my hopes up too quickly.
I ordered on Oct31 and got an order update on Nov09 saying that my order was completed.
Was hoping that vape mail would arrive sometime soon but sounds like that might not happen. Did I mention that patience is not my strong suit? [emoji13]
Edit: I only just now noticed the note left on my Nov09 update resembled a tracking number. I went to the Bulgaria Post international tracking site and plugged in the contents of that note. Lo, and behold, the last update was on Nov21 that said my item was placed in a bag and sent abroad.
I'm assuming that there's no way to track it once it leaves Bulgaria Post and will just have to assume that it is in transit. I have no idea how long it takes at that point but have to assume that black Friday shopping, here in the states, is going to have an effect as well... but it is on its way!
I ordered on Oct31 and got an order update on Nov09 saying that my order was completed.
Was hoping that vape mail would arrive sometime soon but sounds like that might not happen. Did I mention that patience is not my strong suit? [emoji13]
Edit: I only just now noticed the note left on my Nov09 update resembled a tracking number. I went to the Bulgaria Post international tracking site and plugged in the contents of that note. Lo, and behold, the last update was on Nov21 that said my item was placed in a bag and sent abroad.
I'm assuming that there's no way to track it once it leaves Bulgaria Post and will just have to assume that it is in transit. I have no idea how long it takes at that point but have to assume that black Friday shopping, here in the states, is going to have an effect as well... but it is on its way!
Last edited:
I haven't decided on the GPDP's yet as I haven't taken the time to re-figure the atty's on my 22mm mods. No hurry.
Only GP products that didn't work for me the short time I used VA gear was my 4 Herons and 2 Spheroids... very high quality but the draw was way too restricted for my DLH's, and I couldn't put monster coils in them.
Did make a Black Friday purchase today though... have a dozen new 18650 2000mAh 38A batts due Monday (that have a true 1800mAh/CDR30A/MVA45A rating). They should out perform all my VCT5A's for super low sub ohm builds yet still have about the same run time. If they do I'll be adding a couple more dozen of them.
I'm not sure who to thank for it (probably Perseas) but I got a notification of delivery for Dec 1st!
Thank you! [emoji4] I'm excited!
Sent from my SM-G950U using Tapatalk
Thank you! [emoji4] I'm excited!
Sent from my SM-G950U using Tapatalk
I really hope they make a piccoloid v3 and maybe do the piccolo v3.1 again as I need that for the collection
Looking for a Piccoloid.... are they still available or anyone using them? I had two super nice ones.. wish I still had them.
Looks like the pic is sold out but spheroid v2 is still available on that sale page.
Link is in our PM
Hey Carole. It has been a L O N G time, especially on this forum that I haven't ran on much since about Aug 2014. I also took a long hiatus from ECF, about a year and half running a forum in ZA instead. Back on ECF sometimes now, but I'm not very active on any forums now days. Trust all is well on your end in OFL.
Finally my 2nd Dripper Pro is here! DHL is the best even though, according to their tracking it took several days to fly from Los Angeles to Honolulu (there are no possible stops, in between, as far as I know).
I have NO idea where the 1st Dripper Pro is. It was sent by Bulgarian Post sometime early last month and it hasn't shown up yet. Grr.
Here it is on a Paps v4. Matchy matchy! Although there is a gap between the mod and the atty ... will work on those orings but I'm planning on using it for squonking anyway.
I got it working and I'm still working out the kinks on a dual coil 1-ohm build. pretty good so far!
I just have three issues:
1. The threading on the squonk pin goes deeper than on the 510 pin so it goes in deeper and doesn't make contact with a non-adjustable 510/squonk connection (Kanger Dripmod). It also can't be unscrewed a bit because then the positive post gets all wiggly and loose. I worked around this by using a small o-ring, found in my GP spares box, as a spacer. I think it's the spare o-ring from my Heron v2 ... the little one on the top of the deck cover. Not an elegant fix but it works for now. Think about using some spare peek post insulators from a Spheroid/Heron as a spacer instead but can't yet figure out how to cut it down to the proper size.
2. I was originally gong to run it in single-coil mode but didn't think it would be optimal for this atty since there are two juice wells and there doesn't look like there is enough space to fit my single coil in between the posts, not to mention awkward mounting, to place a coil where the tails could get to both wells. How do you guys do it?
3. The spares bag did not include a 510 drip tip adapter. I find the diameter of the included tip a bit uncomfortable for my purposes and the cap size is not compatible with any of my other standard 810 to 510 adapters. I will have to email Vapourart to see if three are any available.
Does anyone have one, or two, 510 tip adapters for the Dripper Pro that they aren't using? I would love to buy them from you if possible?
Sent from my SM-G950U using Tapatalk
I have NO idea where the 1st Dripper Pro is. It was sent by Bulgarian Post sometime early last month and it hasn't shown up yet. Grr.
Here it is on a Paps v4. Matchy matchy! Although there is a gap between the mod and the atty ... will work on those orings but I'm planning on using it for squonking anyway.
I got it working and I'm still working out the kinks on a dual coil 1-ohm build. pretty good so far!
I just have three issues:
1. The threading on the squonk pin goes deeper than on the 510 pin so it goes in deeper and doesn't make contact with a non-adjustable 510/squonk connection (Kanger Dripmod). It also can't be unscrewed a bit because then the positive post gets all wiggly and loose. I worked around this by using a small o-ring, found in my GP spares box, as a spacer. I think it's the spare o-ring from my Heron v2 ... the little one on the top of the deck cover. Not an elegant fix but it works for now. Think about using some spare peek post insulators from a Spheroid/Heron as a spacer instead but can't yet figure out how to cut it down to the proper size.
2. I was originally gong to run it in single-coil mode but didn't think it would be optimal for this atty since there are two juice wells and there doesn't look like there is enough space to fit my single coil in between the posts, not to mention awkward mounting, to place a coil where the tails could get to both wells. How do you guys do it?
3. The spares bag did not include a 510 drip tip adapter. I find the diameter of the included tip a bit uncomfortable for my purposes and the cap size is not compatible with any of my other standard 810 to 510 adapters. I will have to email Vapourart to see if three are any available.
Does anyone have one, or two, 510 tip adapters for the Dripper Pro that they aren't using? I would love to buy them from you if possible?
Sent from my SM-G950U using Tapatalk
- Status
Similar threads
- Locked
- Sticky
