Check it out KHW has a smaller tank option for the Dvarwe, i think this is my favorite stealth setup to date.
private picture hosting
private picture hosting
High end RTAs
- Thread starter Yonjuro
- Start date
- th_trl_thread_readers 0
- Status
So here's a weird thing... My gf put her cloud one permanently out of commission, until I can try to find some replacement parts, so I give her the skyline, put it on her dani box and the resistance is all over the place, down/up, TC is horribly innacurate... but tried the thing on my dna250 beater that I use every day and it's normal, works fine. Same w/ any of my other dna's.
What gives? It's usually rock solid, can't think of anything other than we haven't used the dicodes in a while, she's been using this old cc zero that I upgraded to dna60 but nothing happened to it, it's just been sitting on a shelf. My hussar seems a bit more stable on it but it's still moving too much & vaping extra hot in TC.
What gives? It's usually rock solid, can't think of anything other than we haven't used the dicodes in a while, she's been using this old cc zero that I upgraded to dna60 but nothing happened to it, it's just been sitting on a shelf. My hussar seems a bit more stable on it but it's still moving too much & vaping extra hot in TC.
Last edited:
From Vasillis at ESG
Hi Friends,
Skyline will be avaliable 30-6-2017.
One day before i will anounce the exact time.
Also Ultem Tanks polished and regular will be avaliablt too.
Thanks
Hi Friends,
Skyline will be avaliable 30-6-2017.
One day before i will anounce the exact time.
Also Ultem Tanks polished and regular will be avaliablt too.
Thanks
@TheotherSteveS, to get the AF reducers is this the correct option (nozzle insertions):
Based on your upcoming review this one is on my short list
Is the JFC by friction only or are there "tabs" that are on the drip tip. Hard to tell.
Those are the af reducers indeed!@TheotherSteveS, to get the AF reducers is this the correct option (nozzle insertions):
View attachment 666129
Based on your upcoming review this one is on my short list
Is the JFC by friction only or are there "tabs" that are on the drip tip. Hard to tell.
The only issue I have with it is the JFK control. It is friction only and have had some probs getting it to turn with the DTs I have so beware. Otherwise it is very good!!
ps. get a spare tank or two while you are there!
Last edited:
Thanks!! i was hoping it was the tab style instead of the friction style, which I've had issue w on other atties.
to be honest, it really is an issue on the unit i have and certainly detracts from trhe overall experience in that refilling is now a pita. Vape wise it is excellent, easy to build etc but the jf regulation on this one is a step back from the v1 i had for reasons i don't understand at present.
Last edited:
That truly does suck because this one was on my short list for sure but I've had such issues w that type of JFC
That truly does suck because this one was on my short list for sure but I've had such issues w that type of JFC
Seriously? I would also like more info on this, as I love my v1 Merkava, and was also looking at grabbing the v2...
Also, don't shoot me but I wanted a skyline so bad I got the coppervape one a little while ago.... holy smokes, I can't wait to try the real one because this clone is easier to build, more forgiving, and just explodes with flavor with even a less than stellar build, and the build quality is better than most of my high dollar authentics... so yea I really want an ESG now...
Oh and btw, what is the only rta possibly better than a skyline??? I bet you can guess at $400 and it's actually IN STOCK right now!!!yes, yes, moons, ravens, man someone let me borrow $400...
I have a coppervape skyline on the slow boat also. I was hoping the JFC of the merkava was like the skyline
I took it apart and reassembled thinking the chimney might have be misaligned or soething but it is still difficult to rotate so who knows. The strange thing is that the first time i built it, it was ok so something has changed. Hopefully someone else will chime in with their experience on a different unit!
The Raven's Moon is an incredible atty but a rather different beast to the skyline. Really built for full-on dual coil blow-fest. Fantastical flavour, dripper quality but for me, just too airy for a m2l and god know's i have tried! It's also only $300 US!! Lol!
REMOVED QUOTE OF DELETED POST
Please don't quote what you know will be removed
Hi buddy! Really sorry to hear about your situation and hope stuff gets better for you soon! I suspect this post will be deleted by the mods but thought I would chime in anyway Hang in there!!
Please don't quote what you know will be removed
Hi buddy! Really sorry to hear about your situation and hope stuff gets better for you soon! I suspect this post will be deleted by the mods but thought I would chime in anyway
Hang in there!!
Last edited by a moderator:
Oh, and that smoooth quiet airflow on the RM!
Sent from my iPhone using Tapatalk
I have no issue with my JFC on the Merkava. I actually prefer the friction style because I can use any drip I want instead of being stuck with a proprietary drip tip with tabs. That being said I'm not getting as good a vape as i hoped from it. I still need to test more with different builds but I was hoping it would blow me away right out of the gate. This is my first Merkava and I've nothing but good things about all the versions so it's probably just me.
REMOVED QUOTE OF DELETED POST
Please don't quote what you know will be removed
idc personally but if classy sees she will probably ask you to move it to the... well, classy's. Sorry to hear about your situation.
The merkava thing, if it's anything like the Tilemahos it probably needs a drip tip with dual o-rings to get a good enough grip on it.
Please don't quote what you know will be removed
idc personally but if classy sees she will probably ask you to move it to the... well, classy's. Sorry to hear about your situation.
The merkava thing, if it's anything like the Tilemahos it probably needs a drip tip with dual o-rings to get a good enough grip on it.
Last edited by a moderator:
I think the problem with mine is that the top cap is not exactly aligned with the chimney so the top o-ring is grabbing intermittently as the thig spins round. A really tight fitting DT would do the trick but I dont have one atm.
@hobbes4, will be very interested to hear if you find a build that puts this one in that top range of flavor atties.
So far, this one is moving down my list based on the JFC and your input here. So really interested in your further findings.
My top cap fits quite loose over the chimney, I thought it would leak from not making a good enough seal around the chimney but so far no leaking issues whatsoever. It fits the tank section just fine.
I tested this further by removing the deck and leaving just the chimney and tank section upside down with juice in for a couple hours. No leaks so all is good but if I tear that oring even the slightest I think it would leak. No biggie, I'm assuming it's a standard available size I can get form anywhere.
I tested this further by removing the deck and leaving just the chimney and tank section upside down with juice in for a couple hours. No leaks so all is good but if I tear that oring even the slightest I think it would leak. No biggie, I'm assuming it's a standard available size I can get form anywhere.
Also, I usually vape 70PG/30VG juice. The juice I have in the Merkava is the opposite at 30PG/70VG so that is likely a contributing factor to not getting the vape/wicking I'm use to.
- Status
Similar threads
