You use attys mostly on bottom feeders anymore unless you are just dripping to taste juices. (at least thats what my take is)
- Status
Just had an idea for managing the adjustment of the carto hole/slot size ... by using a carto end cap - those silicone things (on 808s anyway). Cut of the end part off so just have a nice inert tight fighting band that fits around the carto and can be repositioned as required to partially obscure the opening.
Use with large hole or multiple tiny holes; or a slanted slot.
Hole too big? A bit of flooding? Grab a carto end-cap ...
Such a silicone band would allow the carto to be used stand-alone too.
Use with large hole or multiple tiny holes; or a slanted slot.
Hole too big? A bit of flooding? Grab a carto end-cap ...
Such a silicone band would allow the carto to be used stand-alone too.
Last edited:
Welcome to da 'club'. I'm truly having trouble picking up an eMDCC after using these tanks. The vape and flavor are just fracking awesome, especially on my Buzz Pros at 4.1-4.7 VDC!
Good idea!
Havent tried this caise its middle of night here, but I'm thinking put the cap on an (old) carto after removing the insert (other end from connector) and punching it through with a rubber mallet blow from connector end; much as we do with making holes in the syringe plugers.
Or just cut round with a craft knife.
Place in middle of carto and slide fown to partially cover hole/slot. If had 2 giles and only need 1, cut out part of one side of the band.
Or just cut round with a craft knife.
Place in middle of carto and slide fown to partially cover hole/slot. If had 2 giles and only need 1, cut out part of one side of the band.
Last edited:
My, my! Someone's tune has changed from post #10. Iffy giving up his precious eMDCC??
My, my! Someone's tune has changed from post #10. Iffy giving up his precious eMDCC??They must be good!!
Tis true! This ol' dog can learn some new tricks...
I'm not giving 'em up... they just dropped to second place.
OK, what happened to all the options at the top of the response pane?
Last edited:
Tis true! This ol' dog can learn some new tricks...
OK, what happened to all the options at the top of the response pane?
Oooooooops !
At least the basic response pane is still there
Last edited:
1 of the first punched carto's was way to big.. cut down the cap like mentioned above worked like a champ. Ok i guess i will have to add a fill plug since i seem to like and now trust what i made.....
Thanks all....
Thanks all....
Good to hear
This way we don't waste a carto if we made the hole/slot too large initially; it's easily fixed.
Ok update started to flood again so i cut another piece covered hole complete and then made a x with a razor over hole in condom. using it over a hour now with out issue's...
This 1 happens to be a frebie sample from my last order from Electronic Cigarette - Cartomizers - Boge Cartomizers Boge 510 Cartomizer - LR (Steel)
The X was cut in the silicone band ?
Interesting way to make sure it behaves as a valve.
Perhaps LR cartos are less tightly packed with filler (?)
UMMM it is a BIG hole lol was my first attempt at this lets just say i hit it hard and i was using a punch, Tip makes a nice size but once you get past the tip lol it is a bit wide. I was surprised it fired up it was so big
- Status
