Iatty

[CarolCrocbag]

Cheers guys. It is this one.

After testing a 1.5 Ohm atty I get 0.002-0.003 so by that, my first resistance wire was spot on 1.5 Ohm?

So far fine with the last resistance wire I did, which I reckon at 1.8 Ohm? Maybe the 70/30% VG juice couldn't wick quick enough for how I was putting it through its paces at first and thats why I burnt it. I'd never vape like that normally though.

 

[eyebrook]

Hi Carol Imm running a Bulli at 1.7 ohms at the mo and it gets dry very quick, you know that acrid TH lol so I keep it as wet as I can, hope it helps

 

[silentt]

That meter has different ohm settings. Try using the 200, isn't there an Ω​ next to it?

I probably am wrong though because I just looked it up on another site and people say the same thing about 2k ohm setting.

 

[imeothanasis]

for all those waiting
I conference with my friend while I use iatty

I like your tatoos angelli. I also like your atomizer lol

good work buddy!

 

[Krom]

You can make the iatty at whatever resistance you like so absolutely it will work but if you make the resistance to low then I am sure the protection will kick in.

Hi Ata, I believe Provari will display the error "E1" if resistance is too low.

 

[jools]

Hi Carol , I have no idea on the math for converting your reading - sorry I can tell you tho I had 4 turns of wire round the wick iirc - my multimeter read .7 when I touched the leads together beforehand and my wire read 2.5ohms so really 1.8 ohms as I understand it - someone please correct me if I'm wrong tho cause very very new to all this lol

Cheers guys. It is this one.

After testing a 1.5 Ohm atty I get 0.002-0.003 so by that, my first resistance wire was spot on 1.5 Ohm?

So far fine with the last resistance wire I did, which I reckon at 1.8 Ohm? Maybe the 70/30% VG juice couldn't wick quick enough for how I was putting it through its paces at first and thats why I burnt it. I'd never vape like that normally though.

 

[CarolCrocbag]

That meter has different ohm settings. Try using the 200, isn't there an Ω​ next to it?

I probably am wrong though because I just looked it up on another site and people say the same thing about 2k ohm setting.

Yes, though it is 200k and so starts 100.0 and just goes to 00.0 on my 1.5 ohm atty or either of the wires I have done.

 

[silentt]

Hi Ata, I believe Provari will display the error "E1" if resistance is too low.

E1 – Short Circuit / Shorted Atomizer
E2 – Current Limit Exceeded

 

[imeothanasis]

Imeo a question for you,if I leave the iatty laying down or standing upright after a little while Its leaks alot out of the bottom of the atty connection,now I know this is probably flooding of the atty,and I`m sure in the thread somewhere you tell how to stop this,but I cannot find it now. Would you repeat please. I think it is something to do with the cone inside but not sure, do I need to tighten it a little more.

I am sure that you hear very huge gurgling sounds before this happens cliff. So empty the Iatty by blowing air via its bottom so liquid will come out from the mouthpiece. And you have to keep the cone part closed.

 

[imeothanasis]

Wow, just wow. Absolutely brilliant. Great stuff lmeo.
Yep, you guys waiting on yours are in for a real treat.

thanks my dear Carol. I am very glad that a girl is able to use the Iatty in the right way so quick.

 

[imeothanasis]

Imeo;

When I say "Dollars to Doughnuts", I really mean "Sure as Shootin".

"Dollars to Doughnuts" or "Dollars for Doughnuts" is a saying that means something is a sure bet or a certainty.

"Sure as Shootin" means the same thing. Also both can mean "certain, without a doubt, or established beyond question".


So when I say that Dollars to Dougnuts your new VV device will rock I say that with certainty because you have established your abilities beyond question, and buying it from you is a sure bet because of the genius of design and the obvious quality of craftsmanship.

I'm pretty sure every reader here raised in the US is familiar with those sayings and will select "Like" on this post in support of your efforts. We all know how much you "Keep Your Nose to the Grindstone".

And to all the readers............, HaHA I'm on the list first!!!

I am honored repent my good friend.

 

[Krom]

You aren't alone lee, i would love to know why there would be delays in the first place, very odd

Hi Womblebat, the Iatty dispatch has been slower than other models due to the large amount of packaging, testing, cutting wire and wick to size. Most units have now been shipped and all remaining units should be shipped on Monday.

 

[imeothanasis]

Right that's what I do and it clears the atty fine .....its when its left standing or laying down the juice come out of the atty connection the threaded part not from the threads of the bottom cap.coz of no answer yet from Imeo I have tightened down the inside cone a touch and it seems to have remedied it..........I hope

then maybe you dont tight the plastic parts cliff

 

[imeothanasis]

my resistance is 1.8 according to my multimeter ( screwfix £12.99 incase anyone is looking for one ) its on my ggtb right now with a 3.7 battery , clouds of WARM vapour , great taste - just gorgeous, im sorry some of you guys havent got yours yet but trust me , its going to be worth the wait , and if i can make a resistance wire ( and i was worried about it ) then ANYONE can , im blond and a girl for gods sake ! lol ;-)

hahahahaha, girl, blond etc. Now I know that Iatty is a simple device sweety ! I am very glad you are satisfied with it

 

[Krom]

E1 – Short Circuit / Shorted Atomizer
E2 – Current Limit Exceeded

Ok, thanks mate, cliffy also mentioned this, however hifistud mentioned about the low resistance giving the E1 on display, I don't have Provari so am not sure. Are you saying low resistance will give E2 error code? Nice choice in music btw.

 

[imeothanasis]

Hi Carol Imm running a Bulli at 1.7 ohms at the mo and it gets dry very quick, you know that acrid TH lol so I keep it as wet as I can, hope it helps

I vape a 1,5 ohm at 6 volts and the Iatty holds the liquid demand eye. Its wick is too fat so there is no problem. I think Carol needs to open the cone a little and to drip 2 drops of liquid via mouthpiece.

 

[imeothanasis]

Hi Carol , I have no idea on the math for converting your reading - sorry I can tell you tho I had 4 turns of wire round the wick iirc - my multimeter read .7 when I touched the leads together beforehand and my wire read 2.5ohms so really 1.8 ohms as I understand it - someone please correct me if I'm wrong tho cause very very new to all this lol

thats right jools

 

[imeothanasis]

UK, your pm box is full

 

[silentt]

Ok, thanks mate, cliffy also mentioned this, however hifistud mentioned about the low resistance giving the E1 on display, I don't have Provari so am not sure. Are you saying low resistance will give E2 error code? Nice choice in music btw.

Sorry I just looked it up so I could get more detailed codes. Thanks, I love sublime. Very nice and relaxing music.

•E1 – Short Circuit / Shorted Atomizer – If this error appears, remove the atomizer and replace with a different one or lower your voltage settings. The ProVari will automatically reset when the problem is fixed.
• E2 – Current Limit Exceeded – If this error appears, lower the voltage on the device or use a higher resistance atomizer. Once the problem has been fixed, the ProVari will reset itself.

 

[womblebat]

Hi Womblebat, the Iatty dispatch has been slower than other models due to the large amount of packaging, testing, cutting wire and wick to size. Most units have now been shipped and all remaining units should be shipped on Monday.

Cheers Krom, clears that up, i bet you despise the sight of wick and wire now