I want the new better wick with my iatty
I want my Iatty in whatever configuration gets here the fastest
Iatty
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
I want my Iatty in whatever configuration gets here the fastest
Its not the same vahalen, its the original wick that China use on E2 atomizers. I finally managed to find it!!!
Now that Iatty is ready and I finally found the wick I was looking for months things are very easy silentt.
I want the new better wick with my iatty
I have used the CE2 wick and the wick from Cetin @Bulli-Smoker in different rebuildable atomizers and projects. i actually find the wick that I sent Imeo to be better (or I would not have sent a sample). It also is not as prone to breaking/fatigue as the thinner wick. I'll take mine without wick or wire
The wick I use now is your wick Rogers and its very good of course. If it was bad I wouldnt use it of course. But the new one that I test now is 2mm fat and it vapes better. I will try the 1,5mm too but I will put 2 wicks inside Iatty and I will tell you my results
imeothanasis Thanks for posting this as i know from the news that many things are going on in your country at the moment .
I have used the CE2 wick and the wick from Cetin @Bulli-Smoker in different rebuildable atomizers and projects. i actually find the wick that I sent Imeo to be better (or I would not have sent a sample). It also is not as prone to breaking/fatigue as the thinner wick. I'll take mine without wick or wire
Same here
I have enough of both to last a good 3-4 years or more.Sent from my Incredible using Tapatalk
Imeo,
I believe that some wires and wicks are included in Iatty, but I wonder how much of those we are getting if we purchase. If I'm getting the wires that can be used about once or twice, then I'm trying to purchase extras. Thanks!!!!
I believe that some wires and wicks are included in Iatty, but I wonder how much of those we are getting if we purchase. If I'm getting the wires that can be used about once or twice, then I'm trying to purchase extras. Thanks!!!!
jinoo
Imeo stated previously in this thread that we will be getting approximately 1 meter of each (Wick, Resistance Wire and No Resistance wire) with the iAtty
-Zor
Imeo stated previously in this thread that we will be getting approximately 1 meter of each (Wick, Resistance Wire and No Resistance wire) with the iAtty
-Zor
Imeo,
I believe that some wires and wicks are included in Iatty, but I wonder how much of those we are getting if we purchase. If I'm getting the wires that can be used about once or twice, then I'm trying to purchase extras. Thanks!!!!
Imeo,
Don't forget, you were going to try putting a wrap of SS mesh around the wick before you put on the resistance wire. Lemme know how well that works
-Zor
Don't forget, you were going to try putting a wrap of SS mesh around the wick before you put on the resistance wire. Lemme know how well that works
-Zor
for now I will send 1m of resisstance, 1 m of wick and 1 m of the no resistance wire. I wanted to send 2 m of the no resistance wire but I dont have so much quantity. But its cheap so when I will order again you can have more. Or you can order by yourself if you want. You know from where I buy the stuff jiino
Imeo,
I believe that some wires and wicks are included in Iatty, but I wonder how much of those we are getting if we purchase. If I'm getting the wires that can be used about once or twice, then I'm trying to purchase extras. Thanks!!!!
yes, I will do that Zor and I will tell you my results
Imeo,
Don't forget, you were going to try putting a wrap of SS mesh around the wick before you put on the resistance wire. Lemme know how well that works
-Zor
Thank You, hopefully a short video with it
yes, I will do that Zor and I will tell you my results
Hey Imeo, does the supplier for the new wick need to be kept secret or can you share the place to buy that as well? Is it something that needs to be bought in large quantity or can it be bought in small quantities too?
I've noticed that the CE2's lose wicking performance when the wick is too tight when it does a 90 degree turn into the cup.
Another problem with the CE2 is the wick length, it's just too long to soak juice when the carto is low.
...a couple of things that should be avoided in the design of the iAtty.
Another problem with the CE2 is the wick length, it's just too long to soak juice when the carto is low.
...a couple of things that should be avoided in the design of the iAtty.
- Status
