Iatty

[ED-209]

ok ED. Report any issues please

Thank you my friend. Well after countless hours of playing with it, and making coil after coil, I decided to retire from the iAtty. I just don't have the patience for this and with the thought of the iAtty 2 coming out in the future, I felt it would be best to give someone else a shot at the original one. I am hoping all the hype I hear about the new iAtty2 that it will possibly to maybe use just one type of wire as that was my main problem. I couldn't seem to get the connection part right, kept pricking my thumbs (OUCH ) and even one time it was too far on the side of the cup and I think I scorched the plastic top part a little so figured before I messed it up, it deserved a good home. I do love to tinker but just hope the 2nd version is either a little easier (for us mechanically challenged) or just uses one wire type as I got the coil down part no problem. Also hope that there might be options with the tank size but not saying that 5 ml is tank was too large, just curious.

The good news is I took your other advice too, I just ordered me a SS GGTS and a Stealth cap so I am not sure if I have to have it in hand to be a part of the family so to speak but I will have it eventually and am very excited to treat myself to one of these. I figured if the 3.7 isn't enough for me, then the VV add on will solve that. Just hoping one of my device names I submitted is picked as free is always nice

Thanks for your help as well as everyone else who continues to provide great info and advice.

Sorry for long post....

 

[imeothanasis]

No problem ED, its ok. Some things are not for all people , I totally understand. The best move you made was the GGTS because when VV comes to market I will run out of GGTS for sure.

 

[dspin]

No problem ED, its ok. Some things are for all people , I totally understand. The best move you made was the GGTS because when VV comes to market I will run out of GGTS for sure.

I'll second that

 

[gredie]

Last night i had an idea for mult-i-atty. IMHO, the air control in combination with iatty is perfect on the GGTS, on the GGTB iatty gets to much air for my preference. I can put an oring on the GGTB and that helps, but its not as perfect as on GGTS. There will be other PVs where an oring is not an option maybe.
Somebody mentioned that iatty would get nearly no air on the GGstealth when it is full thightened - Don't know if that is true, as I dont have a GGstealth at the moment.

What about putting the air intake into the side of iatty base and cover it with an small control ring - similar to the CR on the GGTS? That way we could control the air flow directly on the iatty indepentend from the used PV.

Would that be an option or is it just a dumb idea?

 

[lorderos33]

Or possibly a special CT like on the UFS designed for the iAtty so no adapters are needed to pop it onto the GGTS and have air control incorporated.

For those with GGTB or any other mod also make available a single adapter plate that threads into the bottom connector of the iAtty collector/air control tank and converts it to a 510 connection and a re-threader for those with 901 or 801 battery mods so no matter what it goes on top of it will look like it was made for that mod.

 

[gredie]

Then i would say a very small version of CT, because iatty is leaking approx. 3-5 drops in a week and also to avoid to get to long dimensions. But i'm still not completly convinced if a CT for this minimum of leakage wouldn't be slightly an overkill.

I've no expierience with UFS so i can't talk about that connection options.

 

[imeothanasis]

Or possibly a special CT like on the UFS designed for the iAtty so no adapters are needed to pop it onto the GGTS and have air control incorporated.

For those with GGTB or any other mod also make available a single adapter plate that threads into the bottom connector of the iAtty collector/air control tank and converts it to a 510 connection and a re-threader for those with 901 or 801 battery mods so no matter what it goes on top of it will look like it was made for that mod.

I have thought of that already lord and I will make not a new CT but a new base for Iatty to fit the existing CT.

 

[Para]

I have thought of that already lord and I will make not a new CT but a new base for Iatty to fit the existing CT.

Awesome !

 

[zuTma]

Great! I was thinking about it too I'm so glad bout it

 

[Psychomaster]

I have thought of that already lord and I will make not a new CT but a new base for Iatty to fit the existing CT.

Can the base be used with the original Iatty? If so, I want!!

 

[imeothanasis]

Unfortunately not psycho, sorry buddy

 

[Vaporologist]

I have thought of that already lord and I will make not a new CT but a new base for Iatty to fit the existing CT.

Love that idea!

 

[Poppa D]

Sounds like the AVS tank.

 

[cliffy1]

Sacrilege !! terrible news I have sold my iatty, My eyes are not that good and having to use a magnifying glass every time to make a new atty up was getting a bit of a strain. so keeping the money for the new Iatty mk2 which I am hoping will be easier to wick. It has gone to a good home folks..........the guy has been trying to get one for ages,so once again the family has been looked after.

 

[Repent]

Imeo are you going to make a metal mouthpiece for iAtty like you do for UFS?

 

[Psychomaster]

Unfortunately not psycho, sorry buddy

That just means that I will have to trade up to an Iatty2 then!

 

[lorderos33]

I have thought of that already lord and I will make not a new CT but a new base for Iatty to fit the existing CT.

That works too, anything to get rid of the adapters is good

I got mine to fit perfectly by turning the 901-510 adapter down approx 1.5mm - 2mm but not everyone has the tools to do this.

I am very eagerly awaiting the iAtty2, it sounds like it will be a big winner wit a connector to fit the CT and elimination of NR wire. Liquid control might be a good thing too

 

[fright88]

That works too, anything to get rid of the adapters is good

I got mine to fit perfectly by turning the 901-510 adapter down approx 1.5mm - 2mm but not everyone has the tools to do this.

I am very eagerly awaiting the iAtty2, it sounds like it will be a big winner wit a connector to fit the CT and elimination of NR wire. Liquid control might be a good thing too

I already stripped out 1 adapter with the iAtty so I agree completely

 

[imeothanasis]

But I already made some of them and they are on the way to my sellers repent

Imeo are you going to make a metal mouthpiece for iAtty like you do for UFS?

 

[imeothanasis]

I didnt totally eliminate NR wires lord. But I think that it will work with only one NR wire this time

That works too, anything to get rid of the adapters is good

I got mine to fit perfectly by turning the 901-510 adapter down approx 1.5mm - 2mm but not everyone has the tools to do this.

I am very eagerly awaiting the iAtty2, it sounds like it will be a big winner wit a connector to fit the CT and elimination of NR wire. Liquid control might be a good thing too