if you want to use your mesh style atomizer without wires

[imeothanasis]

put your mesh inside its hole in a way to go hard in it. Put a NR wire around the edge of the mesh and connect this wire to the positive pole of your mesh style atomizer. As you see you still need a wire because your mesh style atomizer is not made in the right way to use no wires on it. But you dont use nichrome or kanthal at all and you dont need to make coils around mesh.

Push the right voltage on this atomizer. You will need a very good VV device to do this. Or you can use GGTS at 6 volts

 

[Aal_]

I didn't get anything but it seems like a good original idea I think Imeo is creating something new here

 

[justinred]

So the idea is to use the mesh wick as the atomizer. Interesting concept. So the mesh should be unoxidized?

 

[Bishopheals]

I understand what he saying I'm going to try it.

 

[Aal_]

I thought to do that once, then I thought I might be stupid ... (Sigh)

 

[Aal_]

What about ohms? Is the mesh resistive enough?

 

[imeothanasis]

exactly, no oxidation is needed justin

So the idea is to use the mesh wick as the atomizer. Interesting concept. So the mesh should be unoxidized?

 

[imeothanasis]

I have thought of this 6 months ago but I never said anything aal. But now I thought of something more crazy, so I release this info now

I didn't get anything but it seems like a good original idea I think Imeo is creating something new here

 

[imeothanasis]

you cant convert ohms, but you can convert voltage, so same result aal. That why I said that you can use it in a strong VV e-cig. But you can first try it at 3,7 volts of course

What about ohms? Is the mesh resistive enough?

 

[Aal_]

I have thought of this 6 months ago but I never said anything aal. But now I thought of something more crazy, so I release this info now

I knew that you are thinking of something new and I think it might added to something old

 

[imeothanasis]

mesh allows current through it so it will work as wick and as wire at the same time

 

[imeothanasis]

ahahaha, something like this aal.

I knew that you are thinking of something new and I think it might added to something old

 

[urquidezj]

This was attempted by a French modded, really inconsistent results ohms, too much fluctuation and the danger of shorts is insanely high.

 

[imeothanasis]

Danger of a short is zero to my opinion urq because I cant see any reason of that. As for the inconsistent results ohms and fluctuation, I cant see any reason of that too. The point is that if the mesh is tight on its hole and the NR wire tight on the mesh then there is no problem. I made a video like this but I deleted 1 month ago because I didnt want to show this setup to people. It was vaping like crazy at 6 volts

 

[Bishopheals]

Imeo if you give me your blessing I can recreate the experiment and record it on video.

 

[imeothanasis]

of course Bish.

Also thats something that I will create in a little different way

 

[DDD]

Very interested in this. Subscribed.

 

[DDD]

Maybe one could poke a hole through the top part of the wick with a sewing needle, and the thread the NR wire through it and wrap around it a few times for a good connection. I think I'm gonna give that a shot. Any chance of catching the juice on fire, because the current will be down in the tank?

 

[imeothanasis]

no fire at all DDD. As for the connection with NR wire, I made 3-4 coils around mesh and it was more than ok. Mesh bended a little and went near the positive pole but that was ok.

 

[RiverNut]

What kind of ohms would you get doing this with a mesh wrapped silica coil in Ody? I think I've got a project for tonight