Innokin iTaste VV BACK IN STOCK - IMPROVED in ALL THREE COLORS - Black, White & Chameleon- iTaste VV Tank Set-ups also now available

Status
Not open for further replies.

yiddleboge6

ECF Guru
ECF Veteran
Verified Member
Apr 25, 2012
16,850
94,508
PA
itaste.png


itaste_1.png


itaste_2.png


itaste_3.png


itaste_4.png


itaste_5.png

GotVapes innokin iTaste VV SQUARED 800mah Kit
$74.95 $68.95Save: 8% off

Introducing The hottest Variable E-cig on the market today...

The GotVapes Innokin iTaste VV² Squared variable 800mah Kit Available in 3 Stylish Colors with revolutionary easy connect magnetic adapter (THERE IS A PROTECTIVE PLASTIC LAYER ON THE LCD SCREEN, REMOVE IT TO UNVEIL THE ACTUAL LCD)

The Innokin iTasteVV is a microprocessor controlled variable voltage VV electronic cigarette that lets you adjust the voltage in seconds with just a few button presses. Now you can dial-in the perfect settings for your atomizer, cartomizer and e-liquid. Vapors can adjust the voltage in seconds with just a few button presses. You can attach your USb cable to your iTaste and then to a USB power source & use your iTaste as a PassThrough.

The Innokin iTaste can be adjusted from 3.3 – 5.0 volts in .1 volt increments. Higher voltage produces hotter vapor and requires less of a draw to produce the same amount of vapor. The other difference is in taste. Some juices have a stronger flavor at a higher voltage and others have a stronger flavor at lower power. A variable voltage e-cigarette allows you to experiment and find the best combinations fast.

With its built-in two digit display, you can dial in the perfect voltage and change modes right on the device without any additional hardware. You can visually adjust your voltage and access additional user functions on the device in seconds. It's quick and easy With its built-in digit display , iTaste VV will automatically identify atty Ohm and provide best recommendation operating volt to match

iTaste VV e cigarette has advanced magnet technology between battery and tank atomizer, instead of having to screw the atomizer down. Never demagnetization. iTaste VV includes two magnet adapter rings by which to convert the iTaste VV original threads to almost all popular cartomizer/atomizers threads on the market.

What You Receive:

  • (1) Innokin iTaste VV² Polymer Li-ion Intelligent Rechargeable 800mah Battery with Pen-clip Cap - BLACK
  • BOTH 510 & 808 Magnetic snap on adapter heads.
  • (5) 510 TIDY BC Clearomizer - 2.6ohms
  • NEW Improvided Tidy 10 Clearomizers come in this kit with an included Steel mouthpiece that will provide better leakage protection in case you experience any issues in that regard.
  • USB Retractable cable, Nokia style plug WITH wall charger if you wish to charge off household current.
  • Presentation box & English manual


bump.gif
 

mikecup

Super Member
ECF Veteran
Verified Member
Sep 9, 2010
772
376
66
Peninsula, Ohio
Ok I held it up near a halogen light in my basement ceiling and now I do see purple with lots of sparkle. It's very deep purple and looks black with sparkles under normal light. I guess cameleon is a good name for it. It is nice looking. I will cancel my ticket, thanks.

What about the rattle from the 2 buttons that adjust the voltage, can anything be done?
 

mikecup

Super Member
ECF Veteran
Verified Member
Sep 9, 2010
772
376
66
Peninsula, Ohio
After trying it with a phoenix bc, it works good, I did notice the wobble at the magnet, sometimes it does not fire and I have to move the connector while vapping to one side or the other, to much wobble, I can get use to it. I may try putting some tape around sides of the magnet to fill in the gap and see if it helps. It's an ok unit.
 

flarg

Super Member
ECF Veteran
Verified Member
Aug 6, 2012
577
1,337
Here
Ok I held it up near a halogen light in my basement ceiling and now I do see purple with lots of sparkle. It's very deep purple and looks black with sparkles under normal light.
flarg-albums-innokin-itaste-vv-squared-picture133679-picsart-1347295737610.jpg
flarg-albums-innokin-itaste-vv-squared-picture133524-having-led-cartomizer-helps-make-sure-theres-connection-between-atomizer-adapter-battery-led-wont-turn-when-you-press-battery-button-unless-theres-direct-connection-so-helps-put-pressure-one-sideways-direction-when-taking-draw.jpg


After trying it with a phoenix bc, it works good, I did notice the wobble at the magnet, sometimes it does not fire and I have to move the connector while vapping to one side or the other, to much wobble, I can get use to it. I may try putting some tape around sides of the magnet to fill in the gap and see if it helps. It's an ok unit.
flarg-albums-innokin-itaste-vv-squared-picture133513-kgo-next-itaste-both-2-0-boge-atomizer-relatively-same-size-metal-drip-tip-notice-how-atomizer-itaste-crooked-can-wiggled-around-although-boge-atomizer-securely-screwed-atomizer-magnetic-adapter-can-wiggled-around-you-must-make-sure-when-you-take-puff-has-full-connection-so-power-supplied.jpg

Yeah, I don't like that about this unit. The above photo is my iTaste with a Boge atomizer and drip tip next to a KGO with the same setup. You can see how on the iTaste it's sorta tilted. It can go straight, but it doesn't always allow the power connection to the atomizer. This is the same problem even with the original iTaste cartomizers. Gotta sorta lean on them in one direction to ensure a power connection.

Not too thrilled about this device, but I live and I learn. It's sorta cool looking, though I agree it just looks black, and then some sparkles in the light. I wouldn't say purple, even if it's there, somewhere, hidden.

And having the cap is nice and all, but if you can't even put it on top of the cartomizer with the provided drip tip mouth piece, that's kinda stupid. A shorty drip tip mouthpiece should at least be provided.

The kit really is very limited in what it offers. I've been spoiled by other kits that offer at least two batteries and juice and other extras (yes, even VV devices). And even those kits the batteries seemed of better quality. This iTaste doesn't seem very solid. If I shake it there's a rattle inside, like a little pebble sound or something.

Got it for looks and paid for it. Live and I learn. Disappointed in the quality of all of the items I purchased from Got Vapes. Sigh.

On a positive note, I do like the cartomizers that were included in the iTaste set. They seem quite solid, are easy to fill, and are nice and compact in style.
flarg-albums-innokin-itaste-vv-squared-picture133522-picsart-1347256546473.jpg
 
Last edited:

flarg

Super Member
ECF Veteran
Verified Member
Aug 6, 2012
577
1,337
Here
I also have to say that the product description and photos provided on the Got Vapes website are very misleading. You still have to screw in the atomizer into the magnetic adapter. And I only got one extra adapter (so, 2 total: one attached to the battery, one in one of the blank compartments in the packaging). The photos show 3 adapters (2 on the side, 1 on the unit), but the write up says you get 510 and 808. You don't get the square cartomizer or cone tank thing or whatever it is. It's a cylinder cartomizer that you screw into a square adapter on a square battery. It all just feels like a prototype device. The claim that it will fit most other atomizer/cartomizer devices is misleading too, since as mentioned in this thread you can't use anything that has a "skirt" (like many clearomizers). Got Vapes should then at least provide an additional adapter/extender if they're going to make that claim. I was lucky enough to get an adapter and extender in an order from another vendor. And "never demagnetization," well that's the whole issue of the wobble and power to the atomizer, which everyone notes. Lame sauce I say.
 
Last edited by a moderator:

yiddleboge6

ECF Guru
ECF Veteran
Verified Member
Apr 25, 2012
16,850
94,508
PA
I am sorry that you are unhappy with your iTaste. This is what is stated on the web site............

What You Receive:
•(1) Innokin iTaste VV² Polymer Li-ion Intelligent Rechargeable 800mah Battery with Pen-clip Cap - CHAMELEON/Purple
•510 & 808 Magnetic snap on adapter heads.
•(5) 510 TIDY BC Clearomizer - 2.6ohms w/new steel mouthpiece
•NEW Improvided Tidy 10 Clearomizers come in this kit with an included Steel mouthpiece that will provide betetr leakage protection in case you experience any issues in that regard.
•USB Retractable cable, NOkie style plug WITH wall charger if you wish to charge off household current.
•Presentation box & English manual

And that is what you received. There is no mention of the square tank. that is an optional carto you can order. Photos were taken for illustrative purposes, so that you can see the individual parts and how they go together. There is also a photo there of a partially filled wine glass. I'm not trying to be snarky here and please don't take it that way, but I don't think anyone expected to receive that with their order. Claiming that "most" cartos will fit is not misleading because "most" means just that, not "all".
 

flarg

Super Member
ECF Veteran
Verified Member
Aug 6, 2012
577
1,337
Here
  • Deleted by Adrena
  • Reason: Createing problematic business tactics?

flarg

Super Member
ECF Veteran
Verified Member
Aug 6, 2012
577
1,337
Here

flarg

Super Member
ECF Veteran
Verified Member
Aug 6, 2012
577
1,337
Here
So you know how when you hold down both buttons and it shows you the recommended voltage range for the atty/carto/whatever you have on it, the number of puffs, and then the voltage level you're at? How come the voltage range changes for the same atomizer, without any puffs taken? Meaning, I take a reading, and then take another one right after that. For example, I have a 3.5mL ViVi Nova tank on this iTaste, and it's plugged in as a pass-through. I take a reading: 3.3 - 4.1 (the voltage range the iTaste is identifying for this tank), 307 (number of puffs I've taken), 3.5 (current set voltage). Then, I take a reading again: 3.3-3.9, 307, 3.5. I can understand when it reads 5.0 for both the beginning numbers, since that's what happens if the magnetic connection isn't aligned perfectly to allow for proper electrical conduction or whatnot. But why the change in voltage range reading, one right after another and no puffs taken? I first thought it had to do with possibly the battery getting slightly weaker with the LED screen usage, but it does it even plugged in. I thought perhaps my threads weren't clean enough, but they're perfect. What is going on through the mind of this iTaste? Why does it change its mind sometimes? How does it tell the voltage range of the device it has attached to it? Sometimes it is generous and gives me up to 5.0 for my ViVis, but right now it doesn't want to. Oh, can it sense juice thickness perhaps? I doubt it's that smart, if it can't even keep a solid electromagnetic current. Any ideas about this? Thanks! Also, if this is not the thread to be discussing this Innokin iTaste, I apologize, and I'd appreciate direction to the proper thread. :)
 

kwcharlie

Ultra Member
ECF Veteran
Apr 24, 2009
1,213
605
77
Houston
acrigs.com
mine will be off a little after vaping a while, artifact of the way it calculates it like voltage from a PWM output but you would think it would be consistent, i wouldn't worry about it if that's the only problem, wish they would have just done ohms.
Any tips on keeping good contact at the magnet? I do cleaning and scraping, ma-ma hu-hu [so-so] getting ready to try my electrical grease, I'll let you know if it helps a lot
 

Robby

Super Member
ECF Veteran
Mar 30, 2011
507
210
Hamlin, PA
mine will be off a little after vaping a while, artifact of the way it calculates it like voltage from a PWM output but you would think it would be consistent, i wouldn't worry about it if that's the only problem, wish they would have just done ohms.
Any tips on keeping good contact at the magnet? I do cleaning and scraping, ma-ma hu-hu [so-so] getting ready to try my electrical grease, I'll let you know if it helps a lot

A tip to keep good contact is to take off the magnet and push the positive post back up so the magnet is a cube again with no post sticking out...put the magnet on the battery and attach your carto/clearo and twist it on until it makes contact.

sorry if you already do this but if not give it a try
 
Status
Not open for further replies.

Users who are viewing this thread