Introducing the NEW VISION NANO CLEAROMIZER - Excellent Performing 1ml slim Bottom Coil 1.8ohm 510 Clearomizer - Extremely easy, no invert, no syringe

Status
Not open for further replies.

yiddleboge6

ECF Guru
ECF Veteran
Verified Member
Apr 25, 2012
16,850
94,508
PA
visionnanoclearo.png


visionnanoclearo_1.png


visionnanoclearo_2.png


visionnanoclearo_3.png


visionnanoclearo_4.png


visionnanoclearo_5.png


VISION Nano Clearomizer Bottom Coil 1ml 1.8ohm - IN ALL Colors
$3.95

Introducing to GotVapes - The NEW VISION Nano Clearomizer!

We are very impressed with this well sealed 510 Bottom Coil Slim (9mm diameter) 1ml offering from VISION. There is no need to invert to fill and performance has been amazing. Filling is as easy as unscrewing the proprietary mouthpiece off of the stem which extends above the tube and filling right out of your juice bottle, no syringes needed.

The unit is very leak resistant, on the units I have been testing I have not suffered any of this. The stem has a grommet just below the stem threading. The mouthiece itself has a grommet that seals when inserted inside the tube.

THIS UNIT IS GORGEOUS as the pictures attest. It looks great on both your eGos (where you can also use your eGo cone with no problem) and 510 stick style batteries.

Here are Some Important Tips to Optimize Performance:
  • After filling with your juice, screw your mouthpiece back in within about 40-45 seconds to minimize leaking issues.
  • When first using the Nano DEFINITELY allow it to soak in for a good 5 minutes or more. Do not allow it to soak in for too long though without firing it on first use or some seepage may occur.If seepage or moisture occurs simply wipe clean and vape.
  • PLEASE ALLOW a break-in period of about 3/4 of a tank when first using. You will see flavor dramatically improve after this break in period!
  • This unit operates much better at lower voltages! Start at lower PV voltage settings if you are using a VV and work up. Remember that our version of the Nano is presently the 1.8ohm variety. I have tested several of these and it is pretty spot on. I found one at 1.7ohm.
  • When swapping between PVs you may experience non-connectivity. Remember this has a screw out connector on the bottom of the Nano that you can adjust.
  • Dimensions: 62mm length with mouthpiece installed; 9mm width


Multiple discounts available if you purchase 5 or more.



bumpity...............:D
 

wolandepiphanius

Darth Wolandvader
ECF Veteran
Verified Member
Jun 22, 2012
4,538
9,067
San Francisco, CA
I got mine in today, so I tried my experiment. I bore two holes with an exacto knife, and stuck one of these in a carto tank. I used 100%vg juice.

So far, the liquid in the tank seems to be keeping level with the juice in the nano, which leads me to believe that these things can go in a tank so you don't have to refill them as much. Working so far...
 

KraKsX

Moved On
Dec 17, 2012
2,139
2,409
44
Lower NY
kraksx.com
I got mine in today, so I tried my experiment. I bore two holes with an exacto knife, and stuck one of these in a carto tank. I used 100%vg juice.

So far, the liquid in the tank seems to be keeping level with the juice in the nano, which leads me to believe that these things can go in a tank so you don't have to refill them as much. Working so far...

Id love it if you keep us up to date on your experiment, i think that would look SO AMAZING! Lets see a pic!
 

badkolo

ECF Guru
ECF Veteran
Oct 17, 2009
11,274
21,917
Whitestone , New York USA
remember to let is soak in a few minutes, and take a few drags without firing, its not that its truly needed but this way you avoid any dry hits but once its going there is no stopping them, they are truly one of my all time favorite cartomizer, i have vaped many of them with daniel and have gone through dozens of refill with not 1 dry hit, not 1 leak and the taste and vapor is fantastic
 
Last edited:

Harplayr

Vaping Master
ECF Veteran
Verified Member
Mar 28, 2012
3,469
7,613
Florida
remember to let is soak in a fewe minutes, and take a few drags without firing, its not that its truly needed but this way you avoid any dry hits but once its going there is no stopping them, they are truly one of my all time favorite cartomizer, i have vaped many of them with daniel and have gone through dozens of refill with not 1 dry hit, not 1 leak and the taste and vapor is fantastic
How would you rate these compared to the Phoenix Xl Reborn bottom coils?
How easy are these to clean?
 

dodari

Ultra Member
ECF Veteran
Verified Member
Dec 4, 2011
1,203
1,898
New Mexico
you never know, tip adapters could be coming after the chinese holidays

Tip adapters would be a help I'd think.

GAK-K-K. Chinese New Year, when is it? Last year when I was completely new to vaping I got caught completely without supplies. Don't want to get caught short again. Anybody know when it is, please?
 

KraKsX

Moved On
Dec 17, 2012
2,139
2,409
44
Lower NY
kraksx.com
Tip adapters would be a help I'd think.

GAK-K-K. Chinese New Year, when is it? Last year when I was completely new to vaping I got caught completely without supplies. Don't want to get caught short again. Anybody know when it is, please?

I could be wrong, should be close, but feb 2 till feb 15th
 
Status
Not open for further replies.

Users who are viewing this thread