Anyone know where to get one for cheap still? People want $40 more than it was a week ago...no thanks.
IPV 35w and 50w box mods
- Thread starter ainako
- Start date
- th_trl_thread_readers 0
- Status
iPV2 50 Watt Box Mod - Eciggity
They have the silver ones in stock and you get 10% off if you use 'twisted420' as the coupon code. It's $109.79 with free shipping.
Elev8vape.com they have a 30off code brings it down to about 80$
Anyone order from elev8 if so what's the most recent order shipped I'm in the 7k range and its taking them forever to get my mod out kinda sucks but I have others I can use
Nth much they can do if p4y isn't sending the units out to them.
That aside, they're usually very very good with sending out the preorder units asap
That aside, they're usually very very good with sending out the preorder units asap
I couldn't disagree more with TheDC about the IPV2 feeling cheap. Seriously? (I guess some folks want a pimped out looking, bicep-building, spray painted steel electrical box with a generic button and no screen. To each his own I guess
The nifty little box I am thoroughly enjoying is made of aluminum. I wouldn't recommend dropping it (or any mod for that matter) but it has taken a couple falls for me already like a champ. I do plan to SKIN it for scratch protection.
I particularly love the BB style buttons. They are small, flat-topped, precise, clicky, and all work great. (I am glad for that rather than some potentiometer dial or cheap slide found on some garage-made mod). The touch fire, while i have mine disabled, is a new thing to box mods and may not be for all but still cool tech all the same.
And as far as response time on my ipv2... WHOA! There is no delay. Fires hot and super quick. I have run .the range from 7 to 3.7 single and dual coils in RBA and rda and I have never been disappointed. If i want flavor, BAM. Yummy. If I want clouds, BAM. Stop, drop and roll.
Not sure what else you could ask for for $100 bucks.
The nifty little box I am thoroughly enjoying is made of aluminum. I wouldn't recommend dropping it (or any mod for that matter) but it has taken a couple falls for me already like a champ. I do plan to SKIN it for scratch protection.
I particularly love the BB style buttons. They are small, flat-topped, precise, clicky, and all work great. (I am glad for that rather than some potentiometer dial or cheap slide found on some garage-made mod). The touch fire, while i have mine disabled, is a new thing to box mods and may not be for all but still cool tech all the same.
And as far as response time on my ipv2... WHOA! There is no delay. Fires hot and super quick. I have run .the range from 7 to 3.7 single and dual coils in RBA and rda and I have never been disappointed. If i want flavor, BAM. Yummy. If I want clouds, BAM. Stop, drop and roll.
Not sure what else you could ask for for $100 bucks.
Last edited:
Potentiometer 
But yeah. I haven't had a chance to touch mine but that was possibly the first review that says it feels cheap. Everyone else have been heaping praises on the feel and construction.
Not to mention, it is ONE hundred bucks.
I had a zna30. Sure it feels solid and all but oh god, that thing was a ridiculously heavy little thing. Ended up selling it off because it was just annoying to even bring it out. But that's just me
But yeah. I haven't had a chance to touch mine but that was possibly the first review that says it feels cheap. Everyone else have been heaping praises on the feel and construction.
Not to mention, it is ONE hundred bucks.
I had a zna30. Sure it feels solid and all but oh god, that thing was a ridiculously heavy little thing. Ended up selling it off because it was just annoying to even bring it out. But that's just me
the old rock and hard place get one from elev8 for 80 and wait til September or go over to eciggity get a silver one this week but pay 30$ more decisions decisions
^ lol he summed he up pretty nicely.
If I don't have a high wattage device, I would prolly just go with Eciggity. At 110, it's still a pretty solid deal
If I don't have a high wattage device, I would prolly just go with Eciggity. At 110, it's still a pretty solid deal
Don't forget fluid vape. I know some have had issues but I ordered mine Fri. It was delivered yesterday. $99.99 + s&h. No screw issue and no touch pad lock and unlock issue like some other folks have experienced. My own personal experience was flawless.
Sent from my SCH-I535 using Tapatalk 2
I already have the pioneer Yihi SX-330 at 50 Watts and the maximum I can pull off of any resistance atty is about 30 watts. Anything over that will burn the hell out of you lungs. I'm working on a custom 120 Watt Raptor GE chip, just deciding on an enclosure but the GE Naos Raptor chip requires 2 18650 or 26650 batteries in series so you need a pretty big enclosure unless you are willing to pass on the volt meter. I could but a Hammond enclosure but they are all very boxy looking.
I don't think the market for 100 watts will be very big as it is impossible to tape at that wattage. The SX-330 or 350 chips are much better than the DNA chips. The DNA will fry instantly if you put the battery in backwards
I don't think the market for 100 watts will be very big as it is impossible to tape at that wattage. The SX-330 or 350 chips are much better than the DNA chips. The DNA will fry instantly if you put the battery in backwards
Lol with the right airflow? Definitely possible to vape in the 70s to 90s watts range.
Certainly not an ADV, but definitely vapeable (especially after a meal with lotsa meat and potatoes om nom nom)
Certainly not an ADV, but definitely vapeable (especially after a meal with lotsa meat and potatoes om nom nom)
Pre-ordering items that are already available in stock in the U.S. is crazy. They take your money before they even place the order. I have my Authentic Pioneer Yihi SX-350 running at 50 Watts.
I have been vamping a long time and in my opinion going any higher than 35 watts is insane and will burn your lungs. It all ego. Watch the YouTube vide "vaping at 400 watts" an toy will LYAO
I have been vamping a long time and in my opinion going any higher than 35 watts is insane and will burn your lungs. It all ego. Watch the YouTube vide "vaping at 400 watts" an toy will LYAO
I'm order 7390 from elev8. Emailed them twice to get a ballpark idea of when I could expect it, no reply. Called them today and it went straight to a full mailbox. Pretty sure I'm gonna be pulling the plug from them and placing an order through one of the multiple site that has them in stock.
I'm too impatient to wait what seems like it's going to be potentially months from them. I'm ok with coughing up an extra 10/20$ to get it from another shop and potentially have it by the weekend. That is, if I can even get a response from elev8
I'm too impatient to wait what seems like it's going to be potentially months from them. I'm ok with coughing up an extra 10/20$ to get it from another shop and potentially have it by the weekend. That is, if I can even get a response from elev8
You should know by now if you have been vaping that long that logic and practical thinking is frowned upon when it comes to mega wattage mods .
My mod is more powerful than your mod is all that matters , whether it is a good choice for how most people vape is irrelevant lol.
[SIZE=5 said:
Never saw such an interesting screen name , come to think of it never new there was something called black Vomit .
Hmmm
I have tried 3 toptions:
.4,.7, and 1.4 and they all read the same on the IPV2 as they do on my Ohm reader, as well as my vamo
(can't use 2 of them but the vamo reads them fine)
In Fact just the other day my dual coil .4, read as .8, and I verified one of the coils was loose and not heating up
Retightened and immediately displayed .4
Not sure why many of you are giving elev8 a bad ding
Their web site had constant updates and while there was some delay, it came in fine
When I originally pre ordered, it was before the coupon, and was 99.00
I saw the coupon code the next day, emailed them and got the discount applied right away
Most likely they are not used to the large amount of responses they are getting and not set up to handle such a volume.
Same with Fluid Vapes, who I have had no issues with either.
I know good customer service is very important,, but buying Internet Hardware is not on demand, and a little patience is needed, especially for a new product , and from a company many of us have not used before.
But Eciggity has always been great, so for the xtra funds, use who you know and feel comfortable with.
I can just see the 50.00 Fastech clones and the 3 week waiting time !
I have tried 3 toptions:
.4,.7, and 1.4 and they all read the same on the IPV2 as they do on my Ohm reader, as well as my vamo
(can't use 2 of them but the vamo reads them fine)
In Fact just the other day my dual coil .4, read as .8, and I verified one of the coils was loose and not heating up
Retightened and immediately displayed .4
Not sure why many of you are giving elev8 a bad ding
Their web site had constant updates and while there was some delay, it came in fine
When I originally pre ordered, it was before the coupon, and was 99.00
I saw the coupon code the next day, emailed them and got the discount applied right away
Most likely they are not used to the large amount of responses they are getting and not set up to handle such a volume.
Same with Fluid Vapes, who I have had no issues with either.
I know good customer service is very important,, but buying Internet Hardware is not on demand, and a little patience is needed, especially for a new product , and from a company many of us have not used before.
But Eciggity has always been great, so for the xtra funds, use who you know and feel comfortable with.
I can just see the 50.00 Fastech clones and the 3 week waiting time !
Hmmm
I have tried 3 toptions:
.4,.7, and 1.4 and they all read the same on the IPV2 as they do on my Ohm reader, as well as my vamo
(can't use 2 of them but the vamo reads them fine)
In Fact just the other day my dual coil .4, read as .8, and I verified one of the coils was loose and not heating up
Retightened and immediately displayed .4
Not sure why many of you are giving elev8 a bad ding
Their web site had constant updates and while there was some delay, it came in fine
When I originally pre ordered, it was before the coupon, and was 99.00
I saw the coupon code the next day, emailed them and got the discount applied right away
Most likely they are not used to the large amount of responses they are getting and not set up to handle such a volume.
Same with Fluid Vapes, who I have had no issues with either.
I know good customer service is very important,, but buying Internet Hardware is not on demand, and a little patience is needed, especially for a new product , and from a company many of us have not used before.
But Eciggity has always been great, so for the xtra funds, use who you know and feel comfortable with.
I can just see the 50.00 Fastech clones and the 3 week waiting time !
i like elev8 but lets be real it is people jus now getting the hana clone from them when 101 and many others has had them in stock for weeks
- Status
Similar threads
- Locked
